Message ID | 20140523235211.GX1752@bill-the-cat |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
Hi Tom, On Fri, 23 May 2014 19:52:11 -0400, Tom Rini <trini@ti.com> wrote: > Hello, > > The following changes since commit 05d134b084590684bcf4d832c0035952727b7cd9: > > Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42 +0200) > > are available in the git repository at: > > > git://git.denx.de/u-boot-ti.git master > > for you to fetch changes up to 39338a30fab2ce7d80dfe0d457071573727f499f: > > compulab: eeprom: enable any i2c driver (2014-05-23 19:40:39 -0400) > > ---------------------------------------------------------------- > Ash Charles (9): > omap: overo: allow the use of a plain text env file instead boot scripts > OMAP3: overo: add command support for mtd and ubi > OMAP3: overo: eliminate hard-coded partition offsets > arm: omap3: Fix omap3_overo SPL boot hangup > Add Board Revision for Wireless chip > OMAP3: overo: add some Gumstix expansion boards > Allow overo to boot with device tree > omap3: overo: Use common configurations for Overo > omap4: duovero: Add Gumstix DuoVero machine. > > Dmitry Lifshitz (3): > cm-t54: add cm-t54 board support > cm-t54: add EEPROM support and MAC address handling > cm-t54: add environment partition runtime detection > > Heiko Schocher (1): > arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards > > Igor Grinberg (1): > compulab: eeprom: add default eeprom address > > Ilya Ledvich (1): > compulab: eeprom: enable any i2c driver > > Keerthy (1): > ARM: DRA72x: volt: Update the pmic offsets > > Lokesh Vutla (5): > ARM: DRA72x: Add Silicon ID support > ARM: DRA72x: clocks: Update the hwdata > ARM: DRA72x: Update EMIF data > ARM: DRA7xx: ctrl: Fix efuse register addresses > ARM: OMAP: Fix omap_sdram_size calculation > > Peter A. Bigot (1): > OMAP3: overo: increase linux partition to 8 MiB > > Sergey Alyoshin (1): > am33xx: report silicon revision instead of code > > Tom Rini (1): > armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context > > pekon gupta (3): > ARM: omap4: add platform specific info for GPMC and ELM controllers > ARM: omap5: add platform specific info for GPMC and ELM controllers > ARM: omap: merge GPMC initialization code for all platform > > arch/arm/cpu/armv7/am33xx/Makefile | 1 - > arch/arm/cpu/armv7/am33xx/mem.c | 98 -------- > arch/arm/cpu/armv7/am33xx/sys_info.c | 41 ++-- > arch/arm/cpu/armv7/omap-common/Makefile | 4 - > arch/arm/cpu/armv7/omap-common/emif-common.c | 6 +- > arch/arm/cpu/armv7/omap-common/hwinit-common.c | 15 +- > arch/arm/cpu/armv7/omap-common/mem-common.c | 117 +++++++++- > arch/arm/cpu/armv7/omap3/Makefile | 1 - > arch/arm/cpu/armv7/omap5/hw_data.c | 40 ++++ > arch/arm/cpu/armv7/omap5/hwinit.c | 3 + > arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 +- > arch/arm/cpu/armv7/omap5/sdram.c | 19 +- > arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 + > arch/arm/include/asm/arch-omap3/mem.h | 1 + > arch/arm/include/asm/arch-omap4/cpu.h | 5 +- > arch/arm/include/asm/arch-omap4/hardware.h | 26 +++ > arch/arm/include/asm/arch-omap4/mem.h | 62 +++++ > arch/arm/include/asm/arch-omap4/omap.h | 3 - > arch/arm/include/asm/arch-omap4/sys_proto.h | 51 +--- > arch/arm/include/asm/arch-omap5/cpu.h | 5 +- > arch/arm/include/asm/arch-omap5/hardware.h | 26 +++ > arch/arm/include/asm/arch-omap5/mem.h | 62 +++++ > arch/arm/include/asm/arch-omap5/omap.h | 9 +- > arch/arm/include/asm/arch-omap5/sys_proto.h | 50 +--- > arch/arm/include/asm/omap_common.h | 7 +- > arch/arm/include/asm/ti-common/sys_proto.h | 72 ++++++ > board/compulab/cm_t54/Makefile | 10 + > board/compulab/cm_t54/cm_t54.c | 262 +++++++++++++++++++++ > board/compulab/cm_t54/mux.c | 94 ++++++++ > board/compulab/cm_t54/spl.c | 66 ++++++ > board/compulab/common/Makefile | 2 +- > board/compulab/common/eeprom.c | 5 + > board/compulab/common/eeprom.h | 2 +- > board/gumstix/duovero/Makefile | 8 + > board/gumstix/duovero/duovero.c | 264 +++++++++++++++++++++ > board/gumstix/duovero/duovero_mux_data.h | 199 ++++++++++++++++ > board/overo/overo.c | 43 +++- > board/overo/overo.h | 17 ++ > boards.cfg | 2 + > include/configs/cm_t54.h | 149 ++++++++++++ > include/configs/duovero.h | 62 +++++ > include/configs/omap3_overo.h | 296 ++++++++---------------- > include/configs/siemens-am33x-common.h | 2 + > include/configs/ti_omap4_common.h | 9 + > 44 files changed, 1757 insertions(+), 468 deletions(-) > delete mode 100644 arch/arm/cpu/armv7/am33xx/mem.c > create mode 100644 arch/arm/include/asm/arch-omap4/hardware.h > create mode 100644 arch/arm/include/asm/arch-omap4/mem.h > create mode 100644 arch/arm/include/asm/arch-omap5/hardware.h > create mode 100644 arch/arm/include/asm/arch-omap5/mem.h > create mode 100644 arch/arm/include/asm/ti-common/sys_proto.h > create mode 100644 board/compulab/cm_t54/Makefile > create mode 100644 board/compulab/cm_t54/cm_t54.c > create mode 100644 board/compulab/cm_t54/mux.c > create mode 100644 board/compulab/cm_t54/spl.c > create mode 100644 board/gumstix/duovero/Makefile > create mode 100644 board/gumstix/duovero/duovero.c > create mode 100644 board/gumstix/duovero/duovero_mux_data.h > create mode 100644 include/configs/cm_t54.h > create mode 100644 include/configs/duovero.h > Applied to u-boot-arm/master, thanks! Amicalement,