@@ -1676,7 +1676,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
hw->mac.type == e1000_82576) {
ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
if (ret_val) {
- printk(KERN_DEBUG "NVM Read Error\n\n");
+ hw_dbg(KERN_DEBUG "NVM Read Error\n\n");
return ret_val;
}
@@ -2436,8 +2436,7 @@ static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
if (ret_val) {
- hw_dbg("NVM Read Error while updating checksum"
- " compatibility bit.\n");
+ hw_dbg("NVM Read Error while updating checksum compatibility bit.\n");
goto out;
}
@@ -2447,8 +2446,7 @@ static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
&nvm_data);
if (ret_val) {
- hw_dbg("NVM Write Error while updating checksum"
- " compatibility bit.\n");
+ hw_dbg("NVM Write Error while updating checksum compatibility bit.\n");
goto out;
}
}
@@ -866,8 +866,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
goto out;
if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
- hw_dbg("Copper PHY and Auto Neg "
- "has not completed.\n");
+ hw_dbg("Copper PHY and Auto Neg has not completed.\n");
goto out;
}
@@ -932,8 +931,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
hw_dbg("Flow Control = FULL.\r\n");
} else {
hw->fc.current_mode = e1000_fc_rx_pause;
- hw_dbg("Flow Control = "
- "RX PAUSE frames only.\r\n");
+ hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
}
}
/* For receiving PAUSE frames ONLY.
@@ -924,8 +924,7 @@ static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
ret_val = igb_wait_autoneg(hw);
if (ret_val) {
- hw_dbg("Error while waiting for "
- "autoneg to complete\n");
+ hw_dbg("Error while waiting for autoneg to complete\n");
goto out;
}
}
@@ -217,8 +217,7 @@ static void igb_netpoll(struct net_device *);
#ifdef CONFIG_PCI_IOV
static unsigned int max_vfs = 0;
module_param(max_vfs, uint, 0);
-MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
- "per physical function");
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function");
#endif /* CONFIG_PCI_IOV */
static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
@@ -384,8 +383,7 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
- pr_info("Device Name state trans_start "
- "last_rx\n");
+ pr_info("Device Name state trans_start last_rx\n");
pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
netdev->state, netdev->trans_start, netdev->last_rx);
}
@@ -438,9 +436,7 @@ static void igb_dump(struct igb_adapter *adapter)
pr_info("------------------------------------\n");
pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
pr_info("------------------------------------\n");
- pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] "
- "[bi->dma ] leng ntw timestamp "
- "bi->skb\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
const char *next_desc;
@@ -458,9 +454,8 @@ static void igb_dump(struct igb_adapter *adapter)
else
next_desc = "";
- pr_info("T [0x%03X] %016llX %016llX %016llX"
- " %04X %p %016llX %p%s\n", i,
- le64_to_cpu(u0->a),
+ pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
+ i, le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)dma_unmap_addr(buffer_info, dma),
dma_unmap_len(buffer_info, len),
@@ -519,10 +514,8 @@ rx_ring_summary:
pr_info("------------------------------------\n");
pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
pr_info("------------------------------------\n");
- pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] "
- "[bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
- pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] -----"
- "----------- [bi->skb] <-- Adv Rx Write-Back format\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
const char *next_desc;
@@ -4215,8 +4208,8 @@ static void igb_watchdog_task(struct work_struct *work)
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s "
- "Duplex, Flow Control: %s\n",
+ netdev_info(netdev,
+ "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
@@ -4243,9 +4236,7 @@ static void igb_watchdog_task(struct work_struct *work)
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_LINK_THROTTLE)) {
- netdev_info(netdev, "The network adapter link "
- "speed was downshifted because it "
- "overheated\n");
+ netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
}
/* adjust timeout factor according to speed/duplex */
@@ -4277,12 +4268,11 @@ static void igb_watchdog_task(struct work_struct *work)
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_PWR_DOWN)) {
- netdev_err(netdev, "The network adapter was "
- "stopped because it overheated\n");
+ netdev_err(netdev, "The network adapter was stopped because it overheated\n");
}
/* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Down\n",
+ netdev_info(netdev, "igb: %s NIC Link is Down\n",
netdev->name);
netif_carrier_off(netdev);