@@ -99,6 +99,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -194,6 +266,39 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <11>;
+ };
+ };
+
uart0: serial@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
The Berlin BG2 has 32 GPIOs in SoC power domain and 16 in the SM one. Only the first 8 SM GPIOs have interrupt support. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> --- arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+)