Patchwork [GIT,PULL] ARM: Updates for mmci driver for 3.16, take 1

login
register
mail settings
Submitter Ulf Hansson
Date April 14, 2014, 2:17 p.m.
Message ID <CAPDyKFp0K=cijuAZox7_BsTk2UCyC7Dp9HQoO6eJzaHikRMVUw@mail.gmail.com>
Download mbox
Permalink /patch/338962/
State New
Headers show

Pull-request

git://git.linaro.org/people/ulf.hansson/linux-2.6.git

Comments

Ulf Hansson - April 14, 2014, 2:17 p.m.
Hi Russell,

I have collected some patches which all relates to changes to the mmci driver.

The SOC specific patches has been acked by the SOC maintainer Linus
Walleij and the DT patches has been iterated a few times, due to
comments from Rob Herring.

Unless you have some concern with any of the patches, please pull them
into your ARM tree.

Kind regards
Ulf Hansson


The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:

  Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)

are available in the git repository at:

  git://git.linaro.org/people/ulf.hansson/linux-2.6.git
mmci_for_russell_3.16_take1

for you to fetch changes up to 724404ce84cbc3cb9a16dcc593bc4d07aa5b8b2e:

  mmc: mmci: Enforce max frequency configuration through DT
(2014-04-14 15:55:09 +0200)

----------------------------------------------------------------
Ulf Hansson (22):
      mmc: mmci: Mask IRQs for all variants during runtime suspend
      mmc: mmci: Let runtime PM callbacks be available for CONFIG_PM
      mmc: mmci: Put the device into low power state at system suspend
      mmc: mmci: Convert to the mmc gpio API
      mmc: mmci: Convert to devm functions
      mmc: mmci: Update DT documentation
      mmc: mmci: Add DT bindings for signal direction
      mmc: mmci: Add DT bindings for feedback clock pin
      mmc: mmci: Use the common mmc DT parser
      ARM: ux500: Add mmci signal directions and feeback clock in DT for href
      ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
      ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
      ARM: u300: Convert to the common mmc DT bindings for highspeed mode
      mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
      mmc: mmci: Enable MMC_CAP_CMD23
      ARM: ux500: Add the mmc capabilities flags to DT
      ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
      ARM: ux500: Remove redundant board file for mmci platform data
      mmc: mmci: Enforce DT for signal direction and feedback clock
      mmc: mmci: Enforce mmc capabilities through DT
      mmc: mmci: Enforce DMA configuration through DT
      mmc: mmci: Enforce max frequency configuration through DT

 Documentation/devicetree/bindings/mmc/mmci.txt |   54 +++-
 arch/arm/boot/dts/ste-ccu9540.dts              |    6 +-
 arch/arm/boot/dts/ste-href.dtsi                |   19 +-
 arch/arm/boot/dts/ste-nomadik-stn8815.dtsi     |    4 +-
 arch/arm/boot/dts/ste-snowball.dts             |    4 +-
 arch/arm/boot/dts/ste-u300.dts                 |    4 +-
 arch/arm/mach-ux500/Makefile                   |    3 +-
 arch/arm/mach-ux500/board-mop500-sdi.c         |  166 ------------
 arch/arm/mach-ux500/board-mop500.h             |    5 -
 arch/arm/mach-ux500/cpu-db8500.c               |    4 -
 drivers/mmc/host/mmci.c                        |  324 ++++++------------------
 drivers/mmc/host/mmci.h                        |   14 +-
 include/linux/amba/mmci.h                      |   42 ---
 13 files changed, 169 insertions(+), 480 deletions(-)
 delete mode 100644 arch/arm/mach-ux500/board-mop500-sdi.c
Ulf Hansson - April 24, 2014, 10:57 a.m.
On 14 April 2014 16:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> Hi Russell,
>
> I have collected some patches which all relates to changes to the mmci driver.
>
> The SOC specific patches has been acked by the SOC maintainer Linus
> Walleij and the DT patches has been iterated a few times, due to
> comments from Rob Herring.
>
> Unless you have some concern with any of the patches, please pull them
> into your ARM tree.

Ping. :-)

Please, let me know if you prefer another setup than a pull request.

Kind regards
Ulf Hansson

>
> Kind regards
> Ulf Hansson
>
>
> The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:
>
>   Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/ulf.hansson/linux-2.6.git
> mmci_for_russell_3.16_take1
>
> for you to fetch changes up to 724404ce84cbc3cb9a16dcc593bc4d07aa5b8b2e:
>
>   mmc: mmci: Enforce max frequency configuration through DT
> (2014-04-14 15:55:09 +0200)
>
> ----------------------------------------------------------------
> Ulf Hansson (22):
>       mmc: mmci: Mask IRQs for all variants during runtime suspend
>       mmc: mmci: Let runtime PM callbacks be available for CONFIG_PM
>       mmc: mmci: Put the device into low power state at system suspend
>       mmc: mmci: Convert to the mmc gpio API
>       mmc: mmci: Convert to devm functions
>       mmc: mmci: Update DT documentation
>       mmc: mmci: Add DT bindings for signal direction
>       mmc: mmci: Add DT bindings for feedback clock pin
>       mmc: mmci: Use the common mmc DT parser
>       ARM: ux500: Add mmci signal directions and feeback clock in DT for href
>       ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
>       ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
>       ARM: u300: Convert to the common mmc DT bindings for highspeed mode
>       mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
>       mmc: mmci: Enable MMC_CAP_CMD23
>       ARM: ux500: Add the mmc capabilities flags to DT
>       ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
>       ARM: ux500: Remove redundant board file for mmci platform data
>       mmc: mmci: Enforce DT for signal direction and feedback clock
>       mmc: mmci: Enforce mmc capabilities through DT
>       mmc: mmci: Enforce DMA configuration through DT
>       mmc: mmci: Enforce max frequency configuration through DT
>
>  Documentation/devicetree/bindings/mmc/mmci.txt |   54 +++-
>  arch/arm/boot/dts/ste-ccu9540.dts              |    6 +-
>  arch/arm/boot/dts/ste-href.dtsi                |   19 +-
>  arch/arm/boot/dts/ste-nomadik-stn8815.dtsi     |    4 +-
>  arch/arm/boot/dts/ste-snowball.dts             |    4 +-
>  arch/arm/boot/dts/ste-u300.dts                 |    4 +-
>  arch/arm/mach-ux500/Makefile                   |    3 +-
>  arch/arm/mach-ux500/board-mop500-sdi.c         |  166 ------------
>  arch/arm/mach-ux500/board-mop500.h             |    5 -
>  arch/arm/mach-ux500/cpu-db8500.c               |    4 -
>  drivers/mmc/host/mmci.c                        |  324 ++++++------------------
>  drivers/mmc/host/mmci.h                        |   14 +-
>  include/linux/amba/mmci.h                      |   42 ---
>  13 files changed, 169 insertions(+), 480 deletions(-)
>  delete mode 100644 arch/arm/mach-ux500/board-mop500-sdi.c
Ulf Hansson - May 12, 2014, 9:36 a.m.
On 24 April 2014 12:57, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> On 14 April 2014 16:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> Hi Russell,
>>
>> I have collected some patches which all relates to changes to the mmci driver.
>>
>> The SOC specific patches has been acked by the SOC maintainer Linus
>> Walleij and the DT patches has been iterated a few times, due to
>> comments from Rob Herring.
>>
>> Unless you have some concern with any of the patches, please pull them
>> into your ARM tree.
>
> Ping. :-)
>
> Please, let me know if you prefer another setup than a pull request.
>

Hi Russell,

I understand you have been busy, no worries.

As a way forward and to get some testing in linux-next, I will pull in
these patches into my next branch in my mmc tree.
git://git.linaro.org/people/ulf.hansson/mmc.git.

I assume you will tell me if you have any concerns.

Kind regards
Ulf Hansson