| Message ID | 1397271984-23405-3-git-send-email-isubramanian@apm.com |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | David Miller |
| Headers | show |
2014-04-11 20:06 GMT-07:00 Iyappan Subramanian <isubramanian@apm.com>: > This patch adds documentation for APM X-Gene SoC ethernet DTS binding. > > Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> > Signed-off-by: Ravi Patel <rapatel@apm.com> > Signed-off-by: Keyur Chudgar <kchudgar@apm.com> > --- > .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt > > diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > new file mode 100644 > index 0000000..0c983e8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > @@ -0,0 +1,46 @@ > +APM X-Gene SoC Ethernet nodes > + > +Ethernet nodes are defined to describe on-chip ethernet interfaces in > +APM X-Gene SoC. > + > +Required properties: > +- compatible : Should be "apm,xgene-enet" > +- reg : First resource is the ethernet base register set > + Second resource is the ring base register set > + Third resource is the ring command register set > +- interrupts : Ethernet main interrupt > +- clocks : Reference to the clock entry. > +- local-mac-address : Ethernet MAC address. > +- phy-addr : Ethernet MII phy address. > +- phy-mode : Ethernet MII mode. > + > +Optional properties: > +- status : Should be "ok" or "disabled" for enabled/disabled. > + Default is "ok". > + > +Example: > + menetclk: menetclk { > + compatible = "apm,xgene-device-clock"; > + clock-output-names = "menetclk"; > + status = "ok"; > + }; > + > + menet: ethernet@17020000 { > + compatible = "apm,xgene-enet"; > + status = "disabled"; > + reg = <0x0 0x17020000 0x0 0xd100>, > + <0x0 0X17030000 0x0 0X400>, > + <0x0 0X10000000 0x0 0X200>; > + interrupts = <0x0 0x3c 0x4>; > + clocks = <&menetclk 0>; > + local-mac-address = [00 01 73 00 00 01]; > + phy-addr = <3>; An Ethernet PHY node needs to follow the ePAPR recommended representation, which is not this one. Please refer to Documentation/devicetree/bindinsg/net/phy.txt for examples on how to do this properly. > + phy-mode = "rgmii"; > + }; > + > + > +/* Board-specific peripheral configurations */ > + > +&menet { > + status = "ok"; > +}; > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 12/04/14 04:06, Iyappan Subramanian wrote: > This patch adds documentation for APM X-Gene SoC ethernet DTS binding. > > Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> > Signed-off-by: Ravi Patel <rapatel@apm.com> > Signed-off-by: Keyur Chudgar <kchudgar@apm.com> > --- > .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt > > diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > new file mode 100644 > index 0000000..0c983e8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > @@ -0,0 +1,46 @@ > +APM X-Gene SoC Ethernet nodes > + > +Ethernet nodes are defined to describe on-chip ethernet interfaces in > +APM X-Gene SoC. > + > +Required properties: > +- compatible : Should be "apm,xgene-enet" > +- reg : First resource is the ethernet base register set > + Second resource is the ring base register set > + Third resource is the ring command register set > +- interrupts : Ethernet main interrupt > +- clocks : Reference to the clock entry. > +- local-mac-address : Ethernet MAC address. > +- phy-addr : Ethernet MII phy address. > +- phy-mode : Ethernet MII mode. > + > +Optional properties: > +- status : Should be "ok" or "disabled" for enabled/disabled. > + Default is "ok". > + > +Example: > + menetclk: menetclk { > + compatible = "apm,xgene-device-clock"; > + clock-output-names = "menetclk"; > + status = "ok"; > + }; > + > + menet: ethernet@17020000 { > + compatible = "apm,xgene-enet"; > + status = "disabled"; > + reg = <0x0 0x17020000 0x0 0xd100>, > + <0x0 0X17030000 0x0 0X400>, > + <0x0 0X10000000 0x0 0X200>; > + interrupts = <0x0 0x3c 0x4>; > + clocks = <&menetclk 0>; > + local-mac-address = [00 01 73 00 00 01]; > + phy-addr = <3>; > + phy-mode = "rgmii"; > + }; That doesn't look correct for a phy binding.
Hi Florian, Thanks for the review comments. Please find my responses inline. On Sat, Apr 12, 2014 at 11:55 AM, Florian Fainelli <f.fainelli@gmail.com> wrote: > 2014-04-11 20:06 GMT-07:00 Iyappan Subramanian <isubramanian@apm.com>: >> This patch adds documentation for APM X-Gene SoC ethernet DTS binding. >> >> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> >> Signed-off-by: Ravi Patel <rapatel@apm.com> >> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> >> --- >> .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> >> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> new file mode 100644 >> index 0000000..0c983e8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> @@ -0,0 +1,46 @@ >> +APM X-Gene SoC Ethernet nodes >> + >> +Ethernet nodes are defined to describe on-chip ethernet interfaces in >> +APM X-Gene SoC. >> + >> +Required properties: >> +- compatible : Should be "apm,xgene-enet" >> +- reg : First resource is the ethernet base register set >> + Second resource is the ring base register set >> + Third resource is the ring command register set >> +- interrupts : Ethernet main interrupt >> +- clocks : Reference to the clock entry. >> +- local-mac-address : Ethernet MAC address. >> +- phy-addr : Ethernet MII phy address. >> +- phy-mode : Ethernet MII mode. >> + >> +Optional properties: >> +- status : Should be "ok" or "disabled" for enabled/disabled. >> + Default is "ok". >> + >> +Example: >> + menetclk: menetclk { >> + compatible = "apm,xgene-device-clock"; >> + clock-output-names = "menetclk"; >> + status = "ok"; >> + }; >> + >> + menet: ethernet@17020000 { >> + compatible = "apm,xgene-enet"; >> + status = "disabled"; >> + reg = <0x0 0x17020000 0x0 0xd100>, >> + <0x0 0X17030000 0x0 0X400>, >> + <0x0 0X10000000 0x0 0X200>; >> + interrupts = <0x0 0x3c 0x4>; >> + clocks = <&menetclk 0>; >> + local-mac-address = [00 01 73 00 00 01]; >> + phy-addr = <3>; > > An Ethernet PHY node needs to follow the ePAPR recommended > representation, which is not this one. Please refer to > Documentation/devicetree/bindinsg/net/phy.txt for examples on how to > do this properly. Okay. I will change the dts to use phy-handle property and remove phy-addr. > >> + phy-mode = "rgmii"; >> + }; >> + >> + >> +/* Board-specific peripheral configurations */ >> + >> +&menet { >> + status = "ok"; >> +}; >> -- >> 1.7.9.5 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > > > -- > Florian -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ben, Thanks for the review comments. Please find my responses inline. Thanks, Iyappan On Mon, Apr 14, 2014 at 6:06 AM, Ben Dooks <ben.dooks@codethink.co.uk> wrote: > On 12/04/14 04:06, Iyappan Subramanian wrote: >> >> This patch adds documentation for APM X-Gene SoC ethernet DTS binding. >> >> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> >> Signed-off-by: Ravi Patel <rapatel@apm.com> >> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> >> --- >> .../devicetree/bindings/net/apm-xgene-enet.txt | 46 >> ++++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> >> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> new file mode 100644 >> index 0000000..0c983e8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt >> @@ -0,0 +1,46 @@ >> +APM X-Gene SoC Ethernet nodes >> + >> +Ethernet nodes are defined to describe on-chip ethernet interfaces in >> +APM X-Gene SoC. >> + >> +Required properties: >> +- compatible : Should be "apm,xgene-enet" >> +- reg : First resource is the ethernet base register set >> + Second resource is the ring base register set >> + Third resource is the ring command register set >> +- interrupts : Ethernet main interrupt >> +- clocks : Reference to the clock entry. >> +- local-mac-address : Ethernet MAC address. >> +- phy-addr : Ethernet MII phy address. >> +- phy-mode : Ethernet MII mode. >> + >> +Optional properties: >> +- status : Should be "ok" or "disabled" for >> enabled/disabled. >> + Default is "ok". >> + >> +Example: >> + menetclk: menetclk { >> + compatible = "apm,xgene-device-clock"; >> + clock-output-names = "menetclk"; >> + status = "ok"; >> + }; >> + >> + menet: ethernet@17020000 { >> + compatible = "apm,xgene-enet"; >> + status = "disabled"; >> + reg = <0x0 0x17020000 0x0 0xd100>, >> + <0x0 0X17030000 0x0 0X400>, >> + <0x0 0X10000000 0x0 0X200>; >> + interrupts = <0x0 0x3c 0x4>; >> + clocks = <&menetclk 0>; >> + local-mac-address = [00 01 73 00 00 01]; >> + phy-addr = <3>; >> + phy-mode = "rgmii"; >> + }; > > > That doesn't look correct for a phy binding. > Okay. I will change the dts to use phy-handle property and remove phy-addr. I will also rename phy-mode to phy-connection-type as per Documentation/devicetree/bindings/net/ethernet.txt > > -- > Ben Dooks http://www.codethink.co.uk/ > Senior Engineer Codethink - Providing Genius -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 04/12/2014 07:06 AM, Iyappan Subramanian wrote: > This patch adds documentation for APM X-Gene SoC ethernet DTS binding. > Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> > Signed-off-by: Ravi Patel <rapatel@apm.com> > Signed-off-by: Keyur Chudgar <kchudgar@apm.com> > --- > .../devicetree/bindings/net/apm-xgene-enet.txt | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt > diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > new file mode 100644 > index 0000000..0c983e8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt > @@ -0,0 +1,46 @@ > +APM X-Gene SoC Ethernet nodes > + > +Ethernet nodes are defined to describe on-chip ethernet interfaces in > +APM X-Gene SoC. > + > +Required properties: > +- compatible : Should be "apm,xgene-enet" > +- reg : First resource is the ethernet base register set > + Second resource is the ring base register set > + Third resource is the ring command register set > +- interrupts : Ethernet main interrupt > +- clocks : Reference to the clock entry. > +- local-mac-address : Ethernet MAC address. This property is described in Documentation/devicetree/bindings/net/ethernet.txt, please refer to it. > +- phy-addr : Ethernet MII phy address. No, thus won't do. Please use "phy-handle" property to refer to a PHY subnode. > +- phy-mode : Ethernet MII mode. This one is described in Documentation/devicetree/bindings/net/ethernet.txt as well. WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt new file mode 100644 index 0000000..0c983e8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -0,0 +1,46 @@ +APM X-Gene SoC Ethernet nodes + +Ethernet nodes are defined to describe on-chip ethernet interfaces in +APM X-Gene SoC. + +Required properties: +- compatible : Should be "apm,xgene-enet" +- reg : First resource is the ethernet base register set + Second resource is the ring base register set + Third resource is the ring command register set +- interrupts : Ethernet main interrupt +- clocks : Reference to the clock entry. +- local-mac-address : Ethernet MAC address. +- phy-addr : Ethernet MII phy address. +- phy-mode : Ethernet MII mode. + +Optional properties: +- status : Should be "ok" or "disabled" for enabled/disabled. + Default is "ok". + +Example: + menetclk: menetclk { + compatible = "apm,xgene-device-clock"; + clock-output-names = "menetclk"; + status = "ok"; + }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0X400>, + <0x0 0X10000000 0x0 0X200>; + interrupts = <0x0 0x3c 0x4>; + clocks = <&menetclk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-addr = <3>; + phy-mode = "rgmii"; + }; + + +/* Board-specific peripheral configurations */ + +&menet { + status = "ok"; +};