diff mbox

[RFC/PATCH,5/8] LPDDR PFOW definition

Message ID alpine.LFD.1.10.0810082229440.13328@casper.infradead.org
State Superseded
Headers show

Commit Message

Alexey Korolev Oct. 8, 2008, 9:31 p.m. UTC
LPDDR chips use PFOW window for sending commands, reading status and
capabilites requesting.
This pfow.h - contains definitions for PFOW window fileds, possible commands,
error flags and some common macro function to avoid code duplications.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
---
diff mbox

Patch

diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h
new file mode 100644
index 0000000..f67ee6a
--- /dev/null
+++ b/include/linux/mtd/pfow.h
@@ -0,0 +1,159 @@ 
+/* Primary function overlay window definitions
+ * and service functions used by LPDDR chips
+ */
+#include <linux/mtd/qinfo.h>
+
+#ifndef __LINUX_MTD_PFOW_H
+#define __LINUX_MTD_PFOW_H
+
+/* PFOW registers addressing */
+/* Address of symbol "P" */
+#define PFOW_QUERY_STRING_P			0x0000
+/* Address of symbol "F" */
+#define PFOW_QUERY_STRING_F			0x0002
+/* Address of symbol "O" */
+#define PFOW_QUERY_STRING_O			0x0004
+/* Address of symbol "W" */
+#define PFOW_QUERY_STRING_W			0x0006
+/* Identification info for LPDDR chip */
+#define PFOW_MANUFACTURER_ID			0x0020
+#define PFOW_DEVICE_ID				0x0022
+/* Address in PFOW where prog buffer can can be found */
+#define PFOW_PROGRAM_BUFFER_OFFSET		0x0040
+/* Size of program buffer in words */
+#define PFOW_PROGRAM_BUFFER_SIZE		0x0042
+/* Address command code register */
+#define PFOW_COMMAND_CODE			0x0080
+/* command data register */
+#define PFOW_COMMAND_DATA			0x0084
+/* command address register lower address bits */
+#define PFOW_COMMAND_ADDRESS_L			0x0088
+/* command address register upper address bits */
+#define PFOW_COMMAND_ADDRESS_H			0x008a
+/* number of bytes to be proggrammed lower address bits */
+#define PFOW_DATA_COUNT_L			0x0090
+/* number of bytes to be proggrammed higher address bits */
+#define PFOW_DATA_COUNT_H			0x0092
+/* command execution register, the only possible value is 0x01 */
+#define PFOW_COMMAND_EXECUTE			0x00c0
+/* 0x01 should be written at this address to clear buffer */
+#define PFOW_CLEAR_PROGRAM_BUFFER		0x00c4
+/* device program/erase suspend register */
+#define PFOW_PROGRAM_ERASE_SUSPEND		0x00c8
+/* device status register */
+#define PFOW_DSR				0x00cc
+
+/* LPDDR memory device command codes */
+/* They are possible values of PFOW command code register */
+#define LPDDR_WORD_PROGRAM		0x0041
+#define LPDDR_BUFF_PROGRAM		0x00E9
+#define LPDDR_BLOCK_ERASE		0x0020
+#define LPDDR_LOCK_BLOCK		0x0061
+#define LPDDR_UNLOCK_BLOCK		0x0062
+#define LPDDR_READ_BLOCK_LOCK_STATUS	0x0065
+#define LPDDR_INFO_QUERY		0x0098
+#define LPDDR_READ_OTP			0x0097
+#define LPDDR_PROG_OTP			0x00C0
+#define LPDDR_RESUME			0x00D0
+
+/* Defines possible value of PFOW command execution register */
+#define LPDDR_START_EXECUTION			0x0001
+
+/* Defines possible value of PFOW program/erase suspend register */
+#define LPDDR_SUSPEND				0x0001
+
+/* Possible values of PFOW device status register */
+/* access R - read; RC read & clearable */
+#define DSR_DPS			(1<<1) /* RC; device protect status
+					* 0 - not protected 1 - locked */
+#define DSR_PSS			(1<<2) /* R; program suspend status;
+					* 0-prog in progress/completed,
+					* 1- prog suspended */
+#define DSR_VPPS		(1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
+#define DSR_PROGRAM_STATUS	(1<<4) /* RC; 0-successful, 1-error */
+#define DSR_ERASE_STATUS	(1<<5) /* RC; erase or blank check status;
+					* 0-success erase/blank check,
+					* 1 blank check error */
+#define DSR_ESS			(1<<6) /* R; erase suspend status;
+					* 0-erase in progress/complete,
+					* 1 erase suspended */
+#define DSR_READY_STATUS	(1<<7) /* R; Device status
+					* 0-busy,
+					* 1-ready */
+#define DSR_RPS			(0x3<<8) /* RC;  region program status
+					* 00 - Success,
+					* 01-re-program attempt in region with
+					* object mode data,
+					* 10-object mode program w attempt in
+					* region with control mode data
+					* 11-attempt to program invalid half
+					* with 0x41 command */
+#define DSR_AOS			(1<<12) /* RC; 1- AO related failure */
+#define DSR_AVAILABLE		(1<<15) /* R; Device availbility
+					* 1 - Device available
+					* 0 - not available */
+
+/* The superset of all possible error bits in DSR */
+#define DSR_ERR			0x133A
+
+static inline void send_pfow_command(struct map_info *map,
+				unsigned long cmd_code, unsigned long adr,
+				unsigned long len, map_word *datum)
+{
+	int bits_per_chip = map_bankwidth(map) * 8;
+	int chipnum;
+	struct lpddr_private *lpddr = map->fldrv_priv;
+	chipnum = adr >> lpddr->chipshift;
+
+	map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
+	map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
+				map->pfow_base + PFOW_COMMAND_ADDRESS_L);
+	map_write(map, CMD(adr>>bits_per_chip),
+				map->pfow_base + PFOW_COMMAND_ADDRESS_H);
+	if (len) {
+		map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
+					map->pfow_base + PFOW_DATA_COUNT_L);
+		map_write(map, CMD(len>>bits_per_chip),
+					map->pfow_base + PFOW_DATA_COUNT_H);
+	}
+	if (datum)
+		map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
+
+	/* Command execution start */
+	map_write(map, CMD(LPDDR_START_EXECUTION), 
+			map->pfow_base + PFOW_COMMAND_EXECUTE);
+}
+
+static inline void print_drs_error(unsigned dsr)
+{
+	int prog_status = (dsr & DSR_RPS) >> 8;
+
+	if (!(dsr & DSR_AVAILABLE))
+		printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
+	if (prog_status & 0x03)
+		printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
+						"half with 41h command\n");
+	else if (prog_status & 0x02)
+		printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
+					"in region with Control Mode data\n");
+	else if (prog_status &  0x01)
+		printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
+						"with Object Mode data\n");
+	if (!(dsr & DSR_READY_STATUS))
+		printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
+	if (dsr & DSR_ESS)
+		printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
+	if (dsr & DSR_ERASE_STATUS)
+		printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
+	if (dsr & DSR_PROGRAM_STATUS)
+		printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
+	if (dsr & DSR_VPPS)
+		printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
+					"aborted\n");
+	if (dsr & DSR_PSS)
+		printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
+	if (dsr & DSR_DPS)
+		printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
+					"on locked block\n");
+}
+#endif /* __LINUX_MTD_PFOW_H */