Patchwork [GIT,PULL,3/8] ARM: SoC specific changes

login
register
mail settings
Submitter Arnd Bergmann
Date April 5, 2014, 7:04 p.m.
Message ID <201404052104.11363.arnd@arndb.de>
Download mbox
Permalink /patch/337224/
State New
Headers show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/soc-3.15

Comments

Arnd Bergmann - April 5, 2014, 7:04 p.m.
The following changes since commit 0e8b860ac6d65209beea03ee9b718089838476ef:

  ARM: bcm281xx: Rename board_init() function (2014-03-06 03:18:01 -0500)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/soc-3.15

for you to fetch changes up to 9233087dc468f75bdeb7830c694c09dc74be88c4:

  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER (2014-03-27 14:26:27 -0700)

----------------------------------------------------------------
ARM: SoC specific changes

Lots of changes specific to one of the SoC families. Some that
stick out are:

* mach-qcom gains new features, most importantly SMP support for
  the newer chips (Stephen Boyd, Rohit Vaswani)
* mvebu gains support for three new SoCs: Armada 375, 380 and 385
  (Thomas Petazzoni and Free-electrons team)
* SMP support for Rockchips (Heiko Stübner)
* Lots of i.MX changes (Shawn Guo)
* Added support for BCM5301x SoC (Hauke Mehrtens)
* Multiplatform support for Marvell Kirkwood and Dove
  (Andrew Lunn and Sebastian Hesselbarth doing the final part
  of a long journey)
* Unify davinci platforms and remove obsolete ones (Sekhar Nori,
  Arnd Bergmann)

Conflicts:
* BCM5301x trivially conflicts with the moved BCM2835 code
  in Kconfig and Makefile
* arch/arm/mach-imx/pm-imx6q.c got renamed to pm-imx6.c
  and needs the change from 8435cf757632a "arm: Replace various
  irq_desc accesses" applied there.
* some shmobile platforms now need to select both ARCH_DMA_ADDR_T_64BIT
  and SYS_SUPPORTS_SH_CMT
* The vmlinux.lds.h file has two new macros that are both needed

----------------------------------------------------------------
Afzal Mohammed (2):
      ARM: OMAP2+: AM43x: enable in default config
      ARM: OMAP2+: AM43x: determine features

Alexander Shiyan (3):
      ARM: clps711x: Add CLPS711X irqchip driver
      ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver
      ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver

Alexandre Courbot (6):
      ARM: trusted_foundations: fix vendor prefix typos
      ARM: trusted_foundations: fallback when TF support is missing
      ARM: firmware: enable Trusted Foundations by default
      ARM: firmware: add prepare_idle() operation
      ARM: trusted_foundations: implement prepare_idle()
      ARM: tegra: cpuidle: use firmware for power down

Andrew Lunn (17):
      ARM: kirkwood: Give pm.c its own header file.
      ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT
      ARM: kirkwood: Drop printing the SoC type and revision
      ARM: kirkwood: Separate board-dt from common and pcie code.
      ARM: kirkwood: ioremap the cpu_config register before using it.
      ARM: kirkwood: ioremap memory control register
      ARM: mvebu: Add ARCH_MULTI_V7 to SoCs
      ARM: orion: Move cache-feroceon-l2.h out of plat-orion
      ARM: MM: Add DT binding for Feroceon L2 cache
      ARM: Fix default CPU selection for ARCH_MULTI_V5
      ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU
      ARM: mvebu: Move kirkwood DT boards into mach-mvebu
      ARM: mvebu: Let kirkwood use the system controller for restart
      ARM: mvebu: Enable mvebu-soc-id on Kirkwood
      ARM: mvebu: Simplify headers and make local
      ARM: kirkwood: Remove redundant kexec code
      ARM: kirkwood: Add HP T5325 thin client

Anson Huang (8):
      ARM: imx: AHB rate must be set to 132MHz on i.mx6sl
      ARM: imx: add cpuidle support for i.mx6sl
      ARM: imx: add suspend in ocram support for i.mx6q
      ARM: imx: add suspend in ocram support for i.mx6dl
      ARM: imx: add suspend in ocram support for i.mx6sl
      ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecount
      ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
      ARM: imx: add speed grading check for i.mx6 soc

Arnd Bergmann (13):
      Merge branch 'mvebu/soc' into next/soc
      Merge tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu into next/soc
      Merge tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu into next/soc
      Merge tag 'mvebu-soc-3.15-3' of git://git.infradead.org/linux-mvebu into next/soc
      Merge tag 'sunxi-core-for-3.15' of https://github.com/mripard/linux into next/soc
      Merge branch 'bcm/cleanup' into next/soc
      Merge tag 'armsoc/for-3.15/soc-3' of git://github.com/broadcom/mach-bcm into next/soc
      ARM: davinci: remove tnetv107x support
      Merge tag 'davinci-for-v3.15/soc' of git://git.kernel.org/.../nsekhar/linux-davinci into next/soc
      Merge tag 'armsoc/for-3.15/soc-4' of git://github.com/broadcom/mach-bcm into next/soc
      ARM: mvebu: don't select CONFIG_NEON
      Merge tag 'davinci-for-v3.15/soc-2' of git://git.kernel.org/.../nsekhar/linux-davinci into next/soc
      ARM: cache-tauros2: remove ARMv6 code

Dave Gerlach (1):
      ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support

Denis Carikli (3):
      ARM: imx_v6_v7_defconfig: Enable backlight gpio support.
      ARM i.MX35: build in pinctrl support.
      ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.

Ezequiel Garcia (1):
      ARM: mvebu: Rename the ARCH_MVEBU menu option

Fabio Estevam (7):
      ARM: imx_v6_v7_defconfig: Select PCI support
      ARM: imx: Use INT_MEM_CLK_LPM as the bit name
      ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
      ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
      ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
      ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
      ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53

Florian Fainelli (1):
      ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE

Gaku Inami (1):
      ARM: shmobile: r8a7790 CA7-SCU enablement

Gregory CLEMENT (1):
      ARM: mvebu: add initial support for the Armada 375 SOCs

Hauke Mehrtens (3):
      ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
      ARM: BCM5301X: add early debugging support
      ARM: BCM5301X: workaround suppress fault

Heiko Stuebner (4):
      ARM: rockchip: add snoop-control-unit
      ARM: rockchip: add sram dt nodes and documentation
      ARM: rockchip: add power-management-unit
      ARM: rockchip: add smp bringup code

Hisashi Nakamura (1):
      ARM: shmobile: r8a7790 SYSC setup code

Jason Cooper (5):
      Merge tag 'tags/mvebu-soc-3.15' into mvebu/soc-3xx
      ARM: mvebu: Armada 375/38x depend on MULTI_V7
      ARM: kirkwood: select dtbs based on SoC
      Merge branch 'mvebu/soc-3xx' into mvebu/soc
      Merge branch 'mvebu/soc-kw' into mvebu/soc

John Tobias (1):
      ARM: imx: add select on ARCH_MXC for cpufreq support

Keita Kobayashi (1):
      ARM: shmobile: r8a7790 CA15-SCU enablement

Kevin Hilman (1):
      ARM: davinci: fix DT booting with default defconfig

Laurent Pinchart (1):
      ARM: shmobile: APMU: Fix warnings due to improper printk formats

Liu Ying (2):
      ARM: imx: clk-imx6sl: Suppress duplicate const sparse warning
      ARM: imx: clk-vf610: Suppress duplicate const sparse warning

Lokesh Vutla (2):
      ARM: OMAP2+: AM43xx: implement support for machine restart
      ARM: OMAP2+: AM43x: Add ID for ES1.1

Magnus Damm (4):
      ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791
      ARM: shmobile: Break out R-Car SYSC PM code
      ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()
      ARM: shmobile: Move SYSC base variable to inside ifdefs

Markus Mayer (1):
      ARM: bcm21664: Add board support.

Matt Porter (2):
      Merge tag 'armsoc/for-3.15/soc-2' into armsoc/for-3.15/soc-3
      ARM: configs: bcm_defconfig: enable bcm590xx regulator support

Maxime Ripard (2):
      ARM: sunxi: Add the new watchog compatibles to the reboot code
      ARM: sunxi: Select HAVE_ARM_ARCH_TIMER

Nishanth Menon (1):
      ARM: OMAP3+: DPLL: stop reparenting to same parent if already done

Olof Johansson (11):
      Merge tag 'qcom-soc-for-3.15' of git://git.kernel.org/.../galak/linux-qcom into next/soc
      Merge tag 'v3.15-rockchip-smp' of git://git.kernel.org/.../mmind/linux-rockchip into next/soc
      Merge tag 'omap-for-v3.15/soc-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
      Merge tag 'omap-for-v3.15/prcm-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
      Merge tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
      ARM: enable ARM_HAS_SG_CHAIN for multiplatform
      Merge tag 'armsoc/for-3.15/soc-2' of git://github.com/broadcom/mach-bcm into next/soc
      Merge tag 'renesas-soc2-for-v3.15' of git://git.kernel.org/.../horms/renesas into next/soc
      Merge tag 'renesas-soc3-for-v3.15' of git://git.kernel.org/.../horms/renesas into next/soc
      Merge tag 'tegra-for-3.15-tf' of git://git.kernel.org/.../tegra/linux into next/soc
      Merge tag 'tegra-for-3.15-soc' of git://git.kernel.org/.../tegra/linux into next/soc

Paul Bolle (1):
      ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF

Philipp Zabel (2):
      ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
      ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority

Rajendra Nayak (1):
      ARM: OMAP2+: AM43x: Use gptimer as clocksource

Richard Weinberger (1):
      ARM: mach-bcm: Remove GENERIC_TIME

Rohit Vaswani (4):
      ARM: qcom: Re-organize platsmp to make it extensible
      devicetree: bindings: Document Krait/Scorpion cpus and enable-method
      ARM: qcom: Add SMP support for KPSSv1
      ARM: qcom: Add SMP support for KPSSv2

Sascha Hauer (1):
      ARM i.MX: remove PWM platform support

Sebastian Andrzej Siewior (1):
      ARM: imx: enable delaytimer on the imx timer

Sebastian Hesselbarth (1):
      ARM: mvebu: move DT Dove to MVEBU

Sekhar Nori (4):
      ARM: davinci: enable da8xx build concurrently with older devices
      ARM: davinci: add da8xx specific configs to davinci_all_defconfig
      ARM: davinci: da8xx: fix multiple watchdog device registration
      ARM: davinci: remove da8xx_omapl_defconfig

Shawn Guo (12):
      Merge tag 'kconfig-cleanup-for-3.15' into imx/soc
      ARM: imx6q: remove unneeded clk lookups
      ARM: imx6q: support ptp and rmii clock from pad
      bus: imx-weim: support CS GPR configuration
      ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
      ARM: imx6: build headsmp.o only on CONFIG_SMP
      ARM: imx6: call suspend_set_ops() from suspend routine
      ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
      ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
      ARM: imx6: rename pm-imx6q.c to pm-imx6.c
      ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
      ARM: imx6: drop .text.head section annotation from headsmp.S

Srinivas Kandagatla (1):
      MAINTAINERS: Update ARM STi maintainers

Stefan Agner (1):
      ARM: tegra: don't timeout if CPU is powergated

Stephen Boyd (4):
      ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp
      devicetree: bindings: Document qcom,kpss-acc
      devicetree: bindings: Document qcom,saw2 node
      ARM: dts: msm: Add krait-pmu to platforms with Krait CPUs

Stephen Warren (1):
      ARM: tegra: remove tegra EMC scaling driver

Suman Anna (1):
      ARM: AM43x: hwmod data: register spinlock OCP interface

Thierry Reding (1):
      ARM: tegra: Export I/O rail functions

Thomas Petazzoni (7):
      ARM: mvebu: rename armada-370-xp.c to board-v7.c
      ARM: mvebu: rename DT machine structure for Armada 370/XP
      ARM: mvebu: make CPU_PJ4B selection a per-SoC choice
      ARM: mvebu: add Armada 375 support to the system-controller driver
      ARM: mvebu: add workaround for data abort issue on Armada 375
      ARM: mvebu: add initial support for the Armada 380/385 SOCs
      Documentation: arm: update Marvell documentation about Armada 375/38x

Tomi Valkeinen (1):
      ARM: OMAP2+: clock: fix rate prints

Tony Lindgren (1):
      Merge tag 'for-v3.15/omap-hwmod-clk-prcm-a' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.15/prcm


 Documentation/arm/Marvell/README                   |  12 +-
 .../devicetree/bindings/arm/armada-375.txt         |   9 +
 .../devicetree/bindings/arm/armada-38x.txt         |  10 +
 Documentation/devicetree/bindings/arm/bcm4708.txt  |   8 +
 Documentation/devicetree/bindings/arm/cpus.txt     |  25 +-
 .../devicetree/bindings/arm/mrvl/feroceon.txt      |  16 +
 .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt  |  30 +
 .../devicetree/bindings/arm/msm/qcom,saw2.txt      |  35 +
 .../bindings/arm/mvebu-system-controller.txt       |   3 +-
 .../devicetree/bindings/arm/rockchip/pmu.txt       |  16 +
 .../devicetree/bindings/arm/rockchip/smp-sram.txt  |  30 +
 Documentation/devicetree/bindings/bus/imx-weim.txt |  28 +-
 .../interrupt-controller/cirrus,clps711x-intc.txt  |  41 ++
 MAINTAINERS                                        |  20 +-
 arch/arm/Kconfig                                   |   5 +-
 arch/arm/Kconfig.debug                             |  22 +-
 arch/arm/boot/dts/Makefile                         |   9 +-
 arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts     |  62 ++
 arch/arm/boot/dts/qcom-msm8960.dtsi                |   6 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   5 +
 arch/arm/boot/dts/rk3066a.dtsi                     |  13 +
 arch/arm/boot/dts/rk3188.dtsi                      |  13 +
 arch/arm/boot/dts/rk3xxx.dtsi                      |  10 +
 arch/arm/configs/bcm_defconfig                     |   7 +
 arch/arm/configs/da8xx_omapl_defconfig             | 139 ----
 arch/arm/configs/davinci_all_defconfig             |  23 +
 arch/arm/configs/imx_v4_v5_defconfig               |   1 +
 arch/arm/configs/imx_v6_v7_defconfig               |   7 +
 arch/arm/configs/multi_v7_defconfig                |   2 +
 arch/arm/configs/mvebu_defconfig                   |   1 +
 arch/arm/configs/omap2plus_defconfig               |   1 +
 arch/arm/firmware/Kconfig                          |   3 +-
 arch/arm/firmware/trusted_foundations.c            |  20 +-
 arch/arm/include/asm/firmware.h                    |   4 +
 .../asm/hardware}/cache-feroceon-l2.h              |   4 +-
 arch/arm/include/asm/smp.h                         |   9 +
 arch/arm/include/asm/trusted_foundations.h         |  13 +-
 arch/arm/kernel/devtree.c                          |  40 ++
 arch/arm/mach-bcm/Kconfig                          |  26 +
 arch/arm/mach-bcm/Makefile                         |   6 +-
 arch/arm/mach-bcm/bcm_5301x.c                      |  61 ++
 arch/arm/mach-bcm/board_bcm21664.c                 |  78 +++
 arch/arm/mach-clps711x/board-autcpu12.c            |   2 -
 arch/arm/mach-clps711x/board-cdb89712.c            |   2 -
 arch/arm/mach-clps711x/board-clep7312.c            |   2 -
 arch/arm/mach-clps711x/board-edb7211.c             |   2 -
 arch/arm/mach-clps711x/board-p720t.c               |   2 -
 arch/arm/mach-clps711x/common.c                    | 201 +-----
 arch/arm/mach-clps711x/common.h                    |   5 +-
 arch/arm/mach-clps711x/include/mach/clps711x.h     |  16 -
 arch/arm/mach-davinci/Kconfig                      |  12 -
 arch/arm/mach-davinci/Makefile                     |   2 -
 arch/arm/mach-davinci/Makefile.boot                |  20 +-
 arch/arm/mach-davinci/board-tnetv107x-evm.c        | 287 --------
 arch/arm/mach-davinci/davinci.h                    |   2 +
 arch/arm/mach-davinci/devices-tnetv107x.c          | 434 ------------
 arch/arm/mach-davinci/devices.c                    |  17 +-
 arch/arm/mach-davinci/dm355.c                      |   8 +-
 arch/arm/mach-davinci/dm365.c                      |   8 +-
 arch/arm/mach-davinci/dm644x.c                     |   8 +-
 arch/arm/mach-davinci/dm646x.c                     |   8 +-
 arch/arm/mach-davinci/include/mach/cputype.h       |   8 -
 arch/arm/mach-davinci/include/mach/irqs.h          |  97 ---
 arch/arm/mach-davinci/include/mach/mux.h           | 269 --------
 arch/arm/mach-davinci/include/mach/psc.h           |  47 --
 arch/arm/mach-davinci/include/mach/serial.h        |   8 -
 arch/arm/mach-davinci/include/mach/tnetv107x.h     |  61 --
 arch/arm/mach-davinci/include/mach/uncompress.h    |   6 -
 arch/arm/mach-davinci/tnetv107x.c                  | 766 ---------------------
 arch/arm/mach-dove/Kconfig                         |  12 -
 arch/arm/mach-dove/Makefile                        |   1 -
 arch/arm/mach-imx/Kconfig                          |  43 +-
 arch/arm/mach-imx/Makefile                         |   9 +-
 arch/arm/mach-imx/clk-imx21.c                      |   1 -
 arch/arm/mach-imx/clk-imx25.c                      |   8 -
 arch/arm/mach-imx/clk-imx27.c                      |   1 -
 arch/arm/mach-imx/clk-imx51-imx53.c                |   2 -
 arch/arm/mach-imx/clk-imx6q.c                      |   7 +-
 arch/arm/mach-imx/clk-imx6sl.c                     | 159 ++++-
 arch/arm/mach-imx/clk-vf610.c                      |  36 +-
 arch/arm/mach-imx/common.h                         |  17 +-
 arch/arm/mach-imx/cpuidle-imx6q.c                  |   4 +-
 arch/arm/mach-imx/cpuidle-imx6sl.c                 |  57 ++
 arch/arm/mach-imx/cpuidle.h                        |   5 +
 arch/arm/mach-imx/devices-imx25.h                  |   4 -
 arch/arm/mach-imx/devices-imx51.h                  |   4 -
 arch/arm/mach-imx/devices/Kconfig                  |   3 -
 arch/arm/mach-imx/devices/Makefile                 |   1 -
 arch/arm/mach-imx/devices/devices-common.h         |   9 -
 arch/arm/mach-imx/devices/platform-mxc_pwm.c       |  69 --
 arch/arm/mach-imx/hardware.h                       |   4 +-
 arch/arm/mach-imx/headsmp.S                        |  40 --
 arch/arm/mach-imx/mach-imx6q.c                     |  98 ++-
 arch/arm/mach-imx/mach-imx6sl.c                    |   6 +-
 arch/arm/mach-imx/pm-imx6.c                        | 551 +++++++++++++++
 arch/arm/mach-imx/pm-imx6q.c                       | 240 -------
 arch/arm/mach-imx/suspend-imx6.S                   | 361 ++++++++++
 arch/arm/mach-imx/time.c                           |  12 +
 arch/arm/mach-kirkwood/Kconfig                     |   7 -
 arch/arm/mach-kirkwood/Makefile                    |   4 +-
 arch/arm/mach-kirkwood/board-dt.c                  | 113 ++-
 arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c     |  50 --
 arch/arm/mach-kirkwood/common.c                    |   3 +-
 arch/arm/mach-kirkwood/common.h                    |  13 -
 arch/arm/mach-kirkwood/include/mach/bridge-regs.h  |   2 +
 arch/arm/mach-kirkwood/pm.c                        |   9 +-
 arch/arm/mach-kirkwood/pm.h                        |  26 +
 arch/arm/mach-msm/common.h                         |   2 -
 arch/arm/mach-mv78xx0/common.c                     |   2 +-
 arch/arm/mach-mvebu/Kconfig                        |  79 ++-
 arch/arm/mach-mvebu/Makefile                       |   8 +-
 arch/arm/mach-mvebu/board-t5325.c                  |  41 ++
 .../arm/mach-mvebu/{armada-370-xp.c => board-v7.c} |  58 +-
 arch/arm/mach-mvebu/board.h                        |  22 +
 .../{mach-dove/board-dt.c => mach-mvebu/dove.c}    |  20 +-
 arch/arm/mach-mvebu/kirkwood-pm.c                  |  76 ++
 arch/arm/mach-mvebu/kirkwood-pm.h                  |  26 +
 arch/arm/mach-mvebu/kirkwood.c                     | 199 ++++++
 arch/arm/mach-mvebu/kirkwood.h                     |  22 +
 arch/arm/mach-mvebu/mvebu-soc-id.c                 |   1 +
 arch/arm/mach-mvebu/system-controller.c            |  14 +-
 arch/arm/mach-omap2/Kconfig                        |   7 -
 arch/arm/mach-omap2/Makefile                       |   1 +
 arch/arm/mach-omap2/board-generic.c                |   3 +-
 arch/arm/mach-omap2/clkt_dpll.c                    |   6 +-
 arch/arm/mach-omap2/cminst44xx.c                   |  18 +-
 arch/arm/mach-omap2/dpll3xxx.c                     |   2 +-
 arch/arm/mach-omap2/id.c                           |  16 +-
 arch/arm/mach-omap2/io.c                           |   1 +
 arch/arm/mach-omap2/mux.h                          |   3 -
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c         |   1 +
 arch/arm/mach-omap2/prminst44xx.c                  |   3 +
 arch/arm/mach-omap2/soc.h                          |   3 +-
 arch/arm/mach-omap2/timer.c                        |   3 +-
 arch/arm/mach-qcom/board.c                         |  14 -
 arch/arm/mach-qcom/platsmp.c                       | 341 +++++++--
 arch/arm/mach-qcom/scm-boot.h                      |   8 +-
 arch/arm/mach-rockchip/Kconfig                     |   1 +
 arch/arm/mach-rockchip/Makefile                    |   1 +
 arch/arm/mach-rockchip/core.h                      |  22 +
 arch/arm/mach-rockchip/headsmp.S                   |  30 +
 arch/arm/mach-rockchip/platsmp.c                   | 184 +++++
 arch/arm/mach-rockchip/rockchip.c                  |   2 +
 arch/arm/mach-shmobile/Kconfig                     |   3 +
 arch/arm/mach-shmobile/Makefile                    |   3 +-
 arch/arm/mach-shmobile/include/mach/pm-rcar.h      |  15 +
 arch/arm/mach-shmobile/include/mach/r8a7779.h      |  13 +-
 arch/arm/mach-shmobile/include/mach/r8a7790.h      |   1 +
 arch/arm/mach-shmobile/platsmp-apmu.c              |   3 +-
 arch/arm/mach-shmobile/pm-r8a7779.c                | 131 +---
 arch/arm/mach-shmobile/pm-r8a7790.c                |  45 ++
 arch/arm/mach-shmobile/pm-rcar.c                   | 141 ++++
 arch/arm/mach-shmobile/setup-rcar-gen2.c           |   2 +-
 arch/arm/mach-shmobile/smp-r8a7779.c               |  17 +-
 arch/arm/mach-shmobile/smp-r8a7790.c               |  17 +
 arch/arm/mach-sunxi/Kconfig                        |   1 +
 arch/arm/mach-sunxi/sunxi.c                        |   4 +-
 arch/arm/mach-tegra/Makefile                       |   1 -
 arch/arm/mach-tegra/cpuidle-tegra114.c             |   7 +-
 arch/arm/mach-tegra/platsmp.c                      |   2 +-
 arch/arm/mach-tegra/powergate.c                    |   2 +
 arch/arm/mach-tegra/tegra2_emc.c                   | 347 ----------
 arch/arm/mach-tegra/tegra2_emc.h                   |  24 -
 arch/arm/mm/Kconfig                                |   2 +-
 arch/arm/mm/cache-feroceon-l2.c                    |  45 +-
 arch/arm/mm/cache-tauros2.c                        |  29 +-
 drivers/bus/imx-weim.c                             |  58 ++
 drivers/irqchip/Kconfig                            |   8 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-clps711x.c                     | 243 +++++++
 include/asm-generic/vmlinux.lds.h                  |  10 +
 include/linux/mfd/syscon/imx6q-iomuxc-gpr.h        |  18 +
 172 files changed, 3918 insertions(+), 3679 deletions(-)
Gregory CLEMENT - April 6, 2014, 5:02 p.m.
Hi Paul,

On 06/04/2014 11:37, Paul Bolle wrote:
> On Sat, 2014-04-05 at 20:04 +0100, Arnd Bergmann wrote:
>> Gregory CLEMENT (1):
>>       ARM: mvebu: add initial support for the Armada 375 SOCs
>>
>> [...]
>>
>> Thomas Petazzoni (7):
>>       [...]
>>       ARM: mvebu: add initial support for the Armada 380/385 SOCs
> 
> These two commits added select statements for ARM_ERRATA_753970. But I
> couldn't find that Kconfig symbol. (I checked master of Linus' tree and
> current linux-next.) So it seems it was intended to select
> PL310_ERRATA_753970 here. Is that correct?

Yes it is correct. ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970
in kernel 3.2. I had just carry on the symbol name without noticed that
it have changed.

Do you want to send a fix, or do you prefer I take care of it?


Thanks,

Gregory


> 
> 
> Paul Bolle
>
Paul Bolle - April 6, 2014, 5:28 p.m.
On Sun, 2014-04-06 at 19:02 +0200, Gregory CLEMENT wrote:
> Yes it is correct. ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970
> in kernel 3.2. 

Thanks! That was commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up
Kconfig options for PL310 errata workarounds"), by the way. I hadn't
checked the history of the tree. Had I bothered to do so this all would
have been less mysterious.

> I had just carry on the symbol name without noticed that
> it have changed.
> 
> Do you want to send a fix, or do you prefer I take care of it?

It is a trivial fix, but it might need some testing, which I can't do.
So I guess it's easiest if you take care of it.


Paul Bolle
Jason - June 20, 2014, 8:21 p.m.
Paul,

Working through my back-log...

On Mon, May 26, 2014 at 11:01:11AM +0200, Paul Bolle wrote:
> ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970 in v3.2, through
> commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
> PL310 errata workarounds"). Two selects were added in v3.15-rc1 that
> still use the previous name. Rename these.
> 
> Make these statements depend on CACHE_PL310, like all other selects of
> PL310_ERRATA_753970. That way it will only be selected if its dependency
> is met.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> I reported this before v3.15-rc1. I don't know whether any fixes are
> pending. None are in linux-next. 

It looks like rmk just added a patch to fixing the selection of the
erratas.  Could you please take a look and either rebase or drop this
patch?

thx,

Jason.

> And ignoring an errata were one
> apparently could be needed sounds, well, scary. Perhaps it is not.
> Anyhow, to make sure this gets fixed, hopefully before v3.15, I'm
> submitting this (untested!) patch.
> 
> A related observation. There are three PL310 errata options: one depends
> on CACHE_PL310, three depend on CACHE_L2X0. The one depending on
> CACHE_PL310 is selected only if CACHE_PL310 is set.
> 
> But the three depending on CACHE_L2X0 are selected a few times if
> CACHE_L2X0 is set, in other cases if CACHE_PL310 is set, and in some
> cases always. There may be good reasons for this, but it looks odd. I
> know nothing about the PL310 cache and its erratas, so I haven't looked
> into this any further.
> 
>  arch/arm/mach-mvebu/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 3f73eecbcfb0..501d0f42e7b2 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -35,7 +35,7 @@ config MACH_ARMADA_370
>  config MACH_ARMADA_375
>  	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
>  	select ARM_ERRATA_720789
> -	select ARM_ERRATA_753970
> +	select PL310_ERRATA_753970 if CACHE_PL310
>  	select ARM_GIC
>  	select ARMADA_375_CLK
>  	select CPU_V7
> @@ -48,7 +48,7 @@ config MACH_ARMADA_375
>  config MACH_ARMADA_38X
>  	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
>  	select ARM_ERRATA_720789
> -	select ARM_ERRATA_753970
> +	select PL310_ERRATA_753970 if CACHE_PL310
>  	select ARM_GIC
>  	select ARMADA_38X_CLK
>  	select CPU_V7
> -- 
> 1.9.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Paul Bolle - June 20, 2014, 8:42 p.m.
Jason Cooper schreef op vr 20-06-2014 om 16:21 [-0400]:
> It looks like rmk just added a patch to fixing the selection of the
> erratas.  Could you please take a look and either rebase or drop this
> patch?

Sure, no problem. What tree should I check?


Paul Bolle
Russell King - ARM Linux - June 20, 2014, 8:53 p.m.
On Fri, Jun 20, 2014 at 04:21:00PM -0400, Jason Cooper wrote:
> It looks like rmk just added a patch to fixing the selection of the
> erratas.  Could you please take a look and either rebase or drop this
> patch?

Yes please.  If it's needed, just update it to be:

> > diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> > index 3f73eecbcfb0..501d0f42e7b2 100644
> > --- a/arch/arm/mach-mvebu/Kconfig
> > +++ b/arch/arm/mach-mvebu/Kconfig
> > @@ -35,7 +35,7 @@ config MACH_ARMADA_370
> >  config MACH_ARMADA_375
> >  	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
> >  	select ARM_ERRATA_720789
> > -	select ARM_ERRATA_753970
> > +	select PL310_ERRATA_753970 if CACHE_PL310

	select PL310_ERRATA_753970 if CACHE_L2X0

for both platforms.  Although there's no harm in using CACHE_PL310 at
the moment, my longer term plan is to eventually kill CACHE_PL310 as
it's entirely redundant for ARM versions of the L2 cache (it's only
used by the old L2x0 code which I've been unable to eliminate entirely.)
Jason - June 20, 2014, 9:10 p.m.
On Fri, Jun 20, 2014 at 10:42:57PM +0200, Paul Bolle wrote:
> Jason Cooper schreef op vr 20-06-2014 om 16:21 [-0400]:
> > It looks like rmk just added a patch to fixing the selection of the
> > erratas.  Could you please take a look and either rebase or drop this
> > patch?
> 
> Sure, no problem. What tree should I check?

It's

  a641f3a6abce ARM: l2c: fix dependencies on PL310 errata symbols

in Russell's fixes branch:

  http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git fixes

thx,

Jason.
Paul Bolle - June 23, 2014, 7:58 a.m.
On Fri, 2014-06-20 at 17:10 -0400, Jason Cooper wrote:
> On Fri, Jun 20, 2014 at 10:42:57PM +0200, Paul Bolle wrote:
> > Jason Cooper schreef op vr 20-06-2014 om 16:21 [-0400]:
> > > It looks like rmk just added a patch to fixing the selection of the
> > > erratas.  Could you please take a look and either rebase or drop this
> > > patch?
> > 
> > Sure, no problem. What tree should I check?
> 
> It's
> 
>   a641f3a6abce ARM: l2c: fix dependencies on PL310 errata symbols
> 
> in Russell's fixes branch:
> 
>   http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git fixes

Thanks. That commit landed in linux-next in next-20140620. It addresses
all comments I made, below the --- marker, in
https://lkml.org/lkml/2014/5/26/103 . It makes it a bit easier to reason
about the PL310_ERRATA_* symbols. I hope to submit a v2 soon.


Paul Bolle
Russell King - ARM Linux - June 23, 2014, 9:07 a.m.
It's nice to be ignored...

On Mon, Jun 23, 2014 at 11:01:44AM +0200, Paul Bolle wrote:
> ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970 in v3.2, through
> commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
> PL310 errata workarounds"). Two selects were added in v3.15 that still
> use the previous name. Rename these.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> v2: redone on top of next-21040623, and therefor on top of commit
> a641f3a6abce ("ARM: l2c: fix dependencies on PL310 errata symbols").

And you obviously didn't read the commit or understand it.

> Dropped the "if CACHE_PL310" fragments used in v1. No need to use "if
> CACHE_L2X0" instead. Both CACHE_PL310 and CACHE_L2X0 will be
> (indirectly) selected if MACH_ARMADA_375 or MACH_ARMADA_38X are set.

Yes there is.  We've recently seen the selection of CACHE_L2X0 be removed
from platforms, while leaving the selection of the errata behind.  The
result is Kconfig warnings.  My commit above ensures that this doesn't
happen in the future by adding the proper dependencies onto those errata
selects.

Please do the same.

NAK.
Paul Bolle - June 23, 2014, 9:34 a.m.
On Mon, 2014-06-23 at 10:07 +0100, Russell King - ARM Linux wrote:
> On Mon, Jun 23, 2014 at 11:01:44AM +0200, Paul Bolle wrote:
> > Dropped the "if CACHE_PL310" fragments used in v1. No need to use "if
> > CACHE_L2X0" instead. Both CACHE_PL310 and CACHE_L2X0 will be
> > (indirectly) selected if MACH_ARMADA_375 or MACH_ARMADA_38X are set.
> 
> Yes there is.  We've recently seen the selection of CACHE_L2X0 be removed
> from platforms, while leaving the selection of the errata behind.  The
> result is Kconfig warnings.  My commit above ensures that this doesn't
> happen in the future by adding the proper dependencies onto those errata
> selects.

The entries I touched read (in summary):
config MACH_MVEBU_V7
        bool
        select CACHE_L2X0

config MACH_ARMADA_370
        bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
        select MACH_MVEBU_V7
        help
          [...].

config MACH_ARMADA_375
        bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
        select MACH_MVEBU_V7
        help
          [...].

So the choice I faced was between: 
- using "select PL310_ERRATA_753970 if CACHE_L2X0": that matches all
  current occurrences of "select PL310_ERRATA_*" but adds a superfluous
  dependency on CACHE_L2X0
- using just "select PL310_ERRATA_753970": sufficient, but will break
  if CACHE_L2X0 isn't selected through MACH_MVEBU_V7 anymore.

I chose to just "select PL310_ERRATA_753970" but adding "if CACHE_L2X0"
is fine with me too.

> Please do the same.

Will do later today.

Thanks,


Paul Bolle
Russell King - ARM Linux - Sept. 12, 2014, 1:31 p.m.
On Fri, Sep 12, 2014 at 01:10:05PM +0200, Paul Bolle wrote:
> ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970 in v3.2, through
> commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
> PL310 errata workarounds"). Two selects were added in v3.15 that still
> use the previous name. Rename these. Make these select statements depend
> on CACHE_L2X0, like all other select statements for PL310_ERRATA_753970
> do, to be safe we don't inadvertently start to allow pointless
> configurations in the future.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> v3: add CACHE_L2X0 dependency, as Russell requested.
> 
> Tested with "git grep" and fiddling with "make ARCH=arm [...]config".
> Please shout if that's deemed insufficient.
> 
> Note that I promised this v3 over two months ago. Taking two months to
> update this patch is not really something to be proud of. On the other
> hand: no one bothered to prod me for this v3 or send in a proper fix
> themselves. Add to this that I first reported these selects for an
> outdated Kconfig symbol in April. So I begin to wonder whether these
> selects statements are really needed to begin with.

I wonder whether we should deal with this a different way: rather than
having this stuff as a configuration option, have the work-arounds
default to being enabled, and have kernel command parameters to disable
them should that be necessary.

I expect the normal case is that everyone normally runs with these
errata workarounds enabled (especially with a single zImage kernel), so
there will be relatively few who need to disable them.  Plus, this gives
flexibility on single zImage to turn the errata workarounds off without
needing to rebuild.

The other major advantage is less Kconfig options with dependencies
which seem all to easily to result in select abuse.