Patchwork mpc5200: support for the MAN mpc5200 based board uc101

login
register
mail settings
Submitter Heiko Schocher
Date Sept. 14, 2009, 8:05 a.m.
Message ID <4AADF94C.9040502@denx.de>
Download mbox | patch
Permalink /patch/33562/
State Superseded
Delegated to: Grant Likely
Headers show

Comments

Heiko Schocher - Sept. 14, 2009, 8:05 a.m.
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
---
- based on:
  git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next

- checked with:

$ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
total: 0 errors, 0 warnings, 1622 lines checked

0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
$

 arch/powerpc/boot/dts/uc101.dts              |  312 ++++++
 arch/powerpc/configs/52xx/uc101_defconfig    | 1303 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 3 files changed, 1616 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/uc101.dts
 create mode 100644 arch/powerpc/configs/52xx/uc101_defconfig
Grant Likely - Sept. 14, 2009, 1:38 p.m.
Hi Heiko,

Thanks for the patch.  Comments below.

g.

On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
> - serial Console on PSC1
> - 64MB SDRAM
> - MTD CFI Flash
> - Ethernet FEC
> - I2C with PCF8563 and Temp. Sensor ADM9240
> - IDE support
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> - based on:
>  git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
>
> - checked with:
>
> $ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
> total: 0 errors, 0 warnings, 1622 lines checked
>
> 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
> $
>
>  arch/powerpc/boot/dts/uc101.dts              |  312 ++++++
>  arch/powerpc/configs/52xx/uc101_defconfig    | 1303 ++++++++++++++++++++++++++

I generally don't like board specific defconfigs unless there is a
really compelling reason why it should be in the kernel tree.  Please
add the stuff you need (as modules!) to mpc5200_defconfig.

g.

> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
> new file mode 100644
> index 0000000..28e1c90
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/uc101.dts
> @@ -0,0 +1,312 @@
> +/*
> + * uc101 board Device Tree Source
> + *
> + * Copyright (C) 2009 DENX Software Engineering GmbH
> + * Heiko Schocher <hs@denx.de>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +       model = "man,uc101";
> +       compatible = "man,uc101";
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +       interrupt-parent = <&mpc5200_pic>;
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               PowerPC,5200@0 {
> +                       device_type = "cpu";
> +                       reg = <0>;
> +                       d-cache-line-size = <32>;
> +                       i-cache-line-size = <32>;
> +                       d-cache-size = <0x4000>;        // L1, 16K
> +                       i-cache-size = <0x4000>;        // L1, 16K
> +                       timebase-frequency = <0>;       // from bootloader
> +                       bus-frequency = <0>;            // from bootloader
> +                       clock-frequency = <0>;          // from bootloader
> +               };
> +       };
> +
> +       memory {
> +               device_type = "memory";
> +               reg = <0x00000000 0x04000000>;  // 64MB
> +       };
> +
> +       soc5200@f0000000 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               compatible = "fsl,mpc5200-immr";
> +               ranges = <0 0xf0000000 0x0000c000>;
> +               reg = <0xf0000000 0x00000100>;
> +               bus-frequency = <0>;            // from bootloader
> +               system-frequency = <0>;         // from bootloader
> +
> +               cdm@200 {
> +                       compatible = "fsl,mpc5200-cdm";
> +                       reg = <0x200 0x38>;
> +               };
> +
> +               mpc5200_pic: interrupt-controller@500 {
> +                       // 5200 interrupts are encoded into two levels;
> +                       interrupt-controller;
> +                       #interrupt-cells = <3>;
> +                       compatible = "fsl,mpc5200-pic";
> +                       reg = <0x500 0x80>;
> +                       interrupts = <0 0 3>;
> +               };
> +
> +               gpt1: timer@610 {       // General Purpose Timer 1 in GPIO mode
> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> +                       reg = <0x610 0x10>;
> +                       interrupts = <1 10 0>;
> +                       gpio-controller;
> +               };
> +
> +               gpt2: timer@620 {       // General Purpose Timer 2 in GPIO mode
> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> +                       reg = <0x620 0x10>;
> +                       interrupts = <1 11 0>;
> +                       gpio-controller;
> +               };
> +
> +               gpt3: timer@630 {       // General Purpose Timer 3 in GPIO mode
> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> +                       reg = <0x630 0x10>;
> +                       interrupts = <1 12 0>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +               };
> +
> +               gpio_simple: gpio@b00 {
> +                       compatible = "fsl,mpc5200-gpio";
> +                       reg = <0xb00 0x40>;
> +                       interrupts = <1 7 0>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +               };
> +
> +               gpio_wkup: gpio@c00 {
> +                       compatible = "fsl,mpc5200-gpio-wkup";
> +                       reg = <0xc00 0x40>;
> +                       interrupts = <1 8 0 0 3 0>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +               };
> +
> +               dma-controller@1200 {
> +                       device_type = "dma-controller";
> +                       compatible = "fsl,mpc5200-bestcomm";
> +                       reg = <0x1200 0x80>;
> +                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> +                                     3 4 0  3 5 0  3 6 0  3 7 0
> +                                     3 8 0  3 9 0  3 10 0  3 11 0
> +                                     3 12 0  3 13 0  3 14 0  3 15 0>;
> +               };
> +
> +               xlb@1f00 {
> +                       compatible = "fsl,mpc5200-xlb";
> +                       reg = <0x1f00 0x100>;
> +               };
> +
> +               serial@2000 {           // PSC1
> +                       compatible = "fsl,mpc5200-psc-uart";
> +                       reg = <0x2000 0x100>;
> +                       interrupts = <2 1 0>;
> +               };
> +
> +               serial@2200 {           // PSC2
> +                       compatible = "fsl,mpc5200-psc-uart";
> +                       reg = <0x2200 0x100>;
> +                       interrupts = <2 2 0>;
> +               };
> +
> +               serial@2c00 {           // PSC6
> +                       compatible = "fsl,mpc5200-psc-uart";
> +                       reg = <0x2c00 0x100>;
> +                       interrupts = <2 6 0>;
> +               };
> +
> +               ethernet@3000 {
> +                       compatible = "fsl,mpc5200-fec";
> +                       reg = <0x3000 0x400>;
> +                       local-mac-address = [ 00 00 00 00 00 00 ];
> +                       interrupts = <2 5 0>;
> +                       phy-handle = <&phy0>;
> +               };
> +
> +               mdio@3000 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       compatible = "fsl,mpc5200-mdio";
> +                       reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
> +                       interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
> +
> +                       phy0: ethernet-phy@0 {
> +                               reg = <0>;

For completeness, you should have a compatible property for the PHY
here in the form "<vendor>,<part number>"

> +                       };
> +               };
> +
> +               ata@3a00 {
> +                       compatible = "fsl,mpc5200-ata";
> +                       reg = <0x3a00 0x100>;
> +                       interrupts = <2 7 0>;
> +               };
> +
> +               i2c@3d40 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
> +                       reg = <0x3d40 0x40>;
> +                       interrupts = <2 16 0>;
> +                       fsl5200-clocking;

I believe fsl5200-clocking is no longer required.  There is a patch
pending which removes this property from the other .dts files.

> +
> +                       hwmon@2c {
> +                               compatible = "ad,adm9240";
> +                               reg = <0x2c>;
> +                       };
> +                       rtc@51 {
> +                               compatible = "rtc,pcf8563";
> +                               reg = <0x51>;
> +                       };
> +               };
> +
> +               sram@8000 {
> +                       compatible = "fsl,mpc5200-sram";
> +                       reg = <0x8000 0x4000>;
> +               };
> +
> +       };
> +
> +       localbus {
> +               compatible = "fsl,mpc5200-lpb","simple-bus";
> +               #address-cells = <2>;
> +               #size-cells = <1>;
> +               ranges = <0 0 0xff800000 0x00800000
> +                         1 0 0x80000000 0x00800000
> +                         3 0 0x80000000 0x00800000>;
> +
> +               flash@0,0 {
> +                       compatible = "cfi-flash";
> +                       reg = <0 0 0x00800000>;
> +                       bank-width = <2>;
> +                       device-width = <2>;
> +                       #size-cells = <1>;
> +                       #address-cells = <1>;
> +                       partition@0 {
> +                               label = "DTS";
> +                               reg = <0x0 0x00100000>;
> +                       };
> +                       partition@100000 {
> +                               label = "Kernel";
> +                               reg = <0x100000 0x00200000>;
> +                       };
> +                       partition@300000 {
> +                               label = "RootFS";
> +                               reg = <0x00300000 0x00200000>;
> +                       };
> +
> +                       partition@500000 {
> +                               label = "user";
> +                               reg = <0x00500000 0x00200000>;
> +                       };
> +                       partition@700000 {
> +                               label = "U-Boot";
> +                               reg = <0x00700000 0x00040000>;
> +                       };
> +                       partition@740000 {
> +                               label = "Env";
> +                               reg = <0x00740000 0x00010000>;
> +                       };
> +                       partition@750000 {
> +                               label = "red. Env";
> +                               reg = <0x00750000 0x00010000>;
> +                       };
> +                       partition@760000 {
> +                               label = "reserve";
> +                               reg = <0x00760000 0x000a0000>;
> +                       };
> +               };
> +
> +               sram@1,0 {
> +                       compatible = "sram";
> +                       reg = <1 0x100000 0x100000>;
> +               };
> +
> +               gpio-controller-100@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";

Here I see "manroland", but the top level model and compatible
properties use "man".  Which should it be (I suspect "manroland" is a
better choice).

> +                               reg = <3 0x00600100 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-104@3,0 {

These names should be:
gpio-controller@3,600100
gpio-controller@3,600104
gpio-controller@3,600201

etc.

> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600104 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-200@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600200 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-201@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600201 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-202@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600202 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-203@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600203 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-204@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600204 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-206@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600206 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-207@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x00600207 0x1>;
> +                               gpio-controller;
> +               };
> +               gpio-controller-20f@3,0 {
> +                               #gpio-cells = <2>;
> +                               compatible = "manroland,mucmc52-aux-gpio";
> +                               reg = <3 0x0060020f 0x1>;
> +                               gpio-controller;
> +               };
> +
> +               display@3,0 {

similarly, this should be display@3,600000

> +                               device_type = "pdsp-display";

Drop device_type

> +                               compatible = "pdsp-display";

No vendor prefix?

> +                               reg = <3 0x00600000 0x1000>;
> +               };
> +       };
> +
> +};
Heiko Schocher - Sept. 14, 2009, 2:12 p.m.
Hello Grant,

Grant Likely wrote:
> Thanks for the patch.  Comments below.
> 
> g.
> 
> On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
>> - serial Console on PSC1
>> - 64MB SDRAM
>> - MTD CFI Flash
>> - Ethernet FEC
>> - I2C with PCF8563 and Temp. Sensor ADM9240
>> - IDE support
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> ---
>> - based on:
>>  git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
>>
>> - checked with:
>>
>> $ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
>> total: 0 errors, 0 warnings, 1622 lines checked
>>
>> 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
>> $
>>
>>  arch/powerpc/boot/dts/uc101.dts              |  312 ++++++
>>  arch/powerpc/configs/52xx/uc101_defconfig    | 1303 ++++++++++++++++++++++++++
> 
> I generally don't like board specific defconfigs unless there is a
> really compelling reason why it should be in the kernel tree.  Please
> add the stuff you need (as modules!) to mpc5200_defconfig.

OK, thanks for spotting this. I take a look how this works.

> g.
> 
>> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
>> new file mode 100644
>> index 0000000..28e1c90
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/uc101.dts
>> @@ -0,0 +1,312 @@
>> +/*
>> + * uc101 board Device Tree Source
>> + *
>> + * Copyright (C) 2009 DENX Software Engineering GmbH
>> + * Heiko Schocher <hs@denx.de>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/ {
>> +       model = "man,uc101";
>> +       compatible = "man,uc101";
>> +       #address-cells = <1>;
>> +       #size-cells = <1>;
>> +       interrupt-parent = <&mpc5200_pic>;
>> +
>> +       cpus {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +
>> +               PowerPC,5200@0 {
>> +                       device_type = "cpu";
>> +                       reg = <0>;
>> +                       d-cache-line-size = <32>;
>> +                       i-cache-line-size = <32>;
>> +                       d-cache-size = <0x4000>;        // L1, 16K
>> +                       i-cache-size = <0x4000>;        // L1, 16K
>> +                       timebase-frequency = <0>;       // from bootloader
>> +                       bus-frequency = <0>;            // from bootloader
>> +                       clock-frequency = <0>;          // from bootloader
>> +               };
>> +       };
>> +
>> +       memory {
>> +               device_type = "memory";
>> +               reg = <0x00000000 0x04000000>;  // 64MB
>> +       };
>> +
>> +       soc5200@f0000000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               compatible = "fsl,mpc5200-immr";
>> +               ranges = <0 0xf0000000 0x0000c000>;
>> +               reg = <0xf0000000 0x00000100>;
>> +               bus-frequency = <0>;            // from bootloader
>> +               system-frequency = <0>;         // from bootloader
>> +
>> +               cdm@200 {
>> +                       compatible = "fsl,mpc5200-cdm";
>> +                       reg = <0x200 0x38>;
>> +               };
>> +
>> +               mpc5200_pic: interrupt-controller@500 {
>> +                       // 5200 interrupts are encoded into two levels;
>> +                       interrupt-controller;
>> +                       #interrupt-cells = <3>;
>> +                       compatible = "fsl,mpc5200-pic";
>> +                       reg = <0x500 0x80>;
>> +                       interrupts = <0 0 3>;
>> +               };
>> +
>> +               gpt1: timer@610 {       // General Purpose Timer 1 in GPIO mode
>> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> +                       reg = <0x610 0x10>;
>> +                       interrupts = <1 10 0>;
>> +                       gpio-controller;
>> +               };
>> +
>> +               gpt2: timer@620 {       // General Purpose Timer 2 in GPIO mode
>> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> +                       reg = <0x620 0x10>;
>> +                       interrupts = <1 11 0>;
>> +                       gpio-controller;
>> +               };
>> +
>> +               gpt3: timer@630 {       // General Purpose Timer 3 in GPIO mode
>> +                       compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> +                       reg = <0x630 0x10>;
>> +                       interrupts = <1 12 0>;
>> +                       gpio-controller;
>> +                       #gpio-cells = <2>;
>> +               };
>> +
>> +               gpio_simple: gpio@b00 {
>> +                       compatible = "fsl,mpc5200-gpio";
>> +                       reg = <0xb00 0x40>;
>> +                       interrupts = <1 7 0>;
>> +                       gpio-controller;
>> +                       #gpio-cells = <2>;
>> +               };
>> +
>> +               gpio_wkup: gpio@c00 {
>> +                       compatible = "fsl,mpc5200-gpio-wkup";
>> +                       reg = <0xc00 0x40>;
>> +                       interrupts = <1 8 0 0 3 0>;
>> +                       gpio-controller;
>> +                       #gpio-cells = <2>;
>> +               };
>> +
>> +               dma-controller@1200 {
>> +                       device_type = "dma-controller";
>> +                       compatible = "fsl,mpc5200-bestcomm";
>> +                       reg = <0x1200 0x80>;
>> +                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
>> +                                     3 4 0  3 5 0  3 6 0  3 7 0
>> +                                     3 8 0  3 9 0  3 10 0  3 11 0
>> +                                     3 12 0  3 13 0  3 14 0  3 15 0>;
>> +               };
>> +
>> +               xlb@1f00 {
>> +                       compatible = "fsl,mpc5200-xlb";
>> +                       reg = <0x1f00 0x100>;
>> +               };
>> +
>> +               serial@2000 {           // PSC1
>> +                       compatible = "fsl,mpc5200-psc-uart";
>> +                       reg = <0x2000 0x100>;
>> +                       interrupts = <2 1 0>;
>> +               };
>> +
>> +               serial@2200 {           // PSC2
>> +                       compatible = "fsl,mpc5200-psc-uart";
>> +                       reg = <0x2200 0x100>;
>> +                       interrupts = <2 2 0>;
>> +               };
>> +
>> +               serial@2c00 {           // PSC6
>> +                       compatible = "fsl,mpc5200-psc-uart";
>> +                       reg = <0x2c00 0x100>;
>> +                       interrupts = <2 6 0>;
>> +               };
>> +
>> +               ethernet@3000 {
>> +                       compatible = "fsl,mpc5200-fec";
>> +                       reg = <0x3000 0x400>;
>> +                       local-mac-address = [ 00 00 00 00 00 00 ];
>> +                       interrupts = <2 5 0>;
>> +                       phy-handle = <&phy0>;
>> +               };
>> +
>> +               mdio@3000 {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       compatible = "fsl,mpc5200-mdio";
>> +                       reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
>> +                       interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
>> +
>> +                       phy0: ethernet-phy@0 {
>> +                               reg = <0>;
> 
> For completeness, you should have a compatible property for the PHY
> here in the form "<vendor>,<part number>"

Ok, fix this.

>> +                       };
>> +               };
>> +
>> +               ata@3a00 {
>> +                       compatible = "fsl,mpc5200-ata";
>> +                       reg = <0x3a00 0x100>;
>> +                       interrupts = <2 7 0>;
>> +               };
>> +
>> +               i2c@3d40 {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
>> +                       reg = <0x3d40 0x40>;
>> +                       interrupts = <2 16 0>;
>> +                       fsl5200-clocking;
> 
> I believe fsl5200-clocking is no longer required.  There is a patch
> pending which removes this property from the other .dts files.

Ok, fix this.

>> +
>> +                       hwmon@2c {
>> +                               compatible = "ad,adm9240";
>> +                               reg = <0x2c>;
>> +                       };
>> +                       rtc@51 {
>> +                               compatible = "rtc,pcf8563";
>> +                               reg = <0x51>;
>> +                       };
>> +               };
>> +
>> +               sram@8000 {
>> +                       compatible = "fsl,mpc5200-sram";
>> +                       reg = <0x8000 0x4000>;
>> +               };
>> +
>> +       };
>> +
>> +       localbus {
>> +               compatible = "fsl,mpc5200-lpb","simple-bus";
>> +               #address-cells = <2>;
>> +               #size-cells = <1>;
>> +               ranges = <0 0 0xff800000 0x00800000
>> +                         1 0 0x80000000 0x00800000
>> +                         3 0 0x80000000 0x00800000>;
>> +
>> +               flash@0,0 {
>> +                       compatible = "cfi-flash";
>> +                       reg = <0 0 0x00800000>;
>> +                       bank-width = <2>;
>> +                       device-width = <2>;
>> +                       #size-cells = <1>;
>> +                       #address-cells = <1>;
>> +                       partition@0 {
>> +                               label = "DTS";
>> +                               reg = <0x0 0x00100000>;
>> +                       };
>> +                       partition@100000 {
>> +                               label = "Kernel";
>> +                               reg = <0x100000 0x00200000>;
>> +                       };
>> +                       partition@300000 {
>> +                               label = "RootFS";
>> +                               reg = <0x00300000 0x00200000>;
>> +                       };
>> +
>> +                       partition@500000 {
>> +                               label = "user";
>> +                               reg = <0x00500000 0x00200000>;
>> +                       };
>> +                       partition@700000 {
>> +                               label = "U-Boot";
>> +                               reg = <0x00700000 0x00040000>;
>> +                       };
>> +                       partition@740000 {
>> +                               label = "Env";
>> +                               reg = <0x00740000 0x00010000>;
>> +                       };
>> +                       partition@750000 {
>> +                               label = "red. Env";
>> +                               reg = <0x00750000 0x00010000>;
>> +                       };
>> +                       partition@760000 {
>> +                               label = "reserve";
>> +                               reg = <0x00760000 0x000a0000>;
>> +                       };
>> +               };
>> +
>> +               sram@1,0 {
>> +                       compatible = "sram";
>> +                       reg = <1 0x100000 0x100000>;
>> +               };
>> +
>> +               gpio-controller-100@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
> 
> Here I see "manroland", but the top level model and compatible
> properties use "man".  Which should it be (I suspect "manroland" is a
> better choice).

You are right, I change this too "manroland".

>> +                               reg = <3 0x00600100 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-104@3,0 {
> 
> These names should be:
> gpio-controller@3,600100
> gpio-controller@3,600104
> gpio-controller@3,600201
> 
> etc.

OK, fix this.

>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600104 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-200@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600200 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-201@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600201 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-202@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600202 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-203@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600203 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-204@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600204 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-206@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600206 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-207@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x00600207 0x1>;
>> +                               gpio-controller;
>> +               };
>> +               gpio-controller-20f@3,0 {
>> +                               #gpio-cells = <2>;
>> +                               compatible = "manroland,mucmc52-aux-gpio";
>> +                               reg = <3 0x0060020f 0x1>;
>> +                               gpio-controller;
>> +               };
>> +
>> +               display@3,0 {
> 
> similarly, this should be display@3,600000

Ok.

>> +                               device_type = "pdsp-display";
> 
> Drop device_type

Ok.

>> +                               compatible = "pdsp-display";
> 
> No vendor prefix?

I take a look at this.

>> +                               reg = <3 0x00600000 0x1000>;
>> +               };
>> +       };
>> +
>> +};

Thanks for reviewing this patch

bye
Heiko
Wolfgang Grandegger - Sept. 14, 2009, 7:16 p.m.
Hello Heiko,

Heiko Schocher wrote:
> Hello Grant,
> 
> Grant Likely wrote:
>> Thanks for the patch.  Comments below.
>>
>> g.
>>
>> On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
>>> - serial Console on PSC1
>>> - 64MB SDRAM
>>> - MTD CFI Flash
>>> - Ethernet FEC
>>> - I2C with PCF8563 and Temp. Sensor ADM9240
>>> - IDE support
>>>
>>> Signed-off-by: Heiko Schocher <hs@denx.de>
...snip....

>>> +               i2c@3d40 {
>>> +                       #address-cells = <1>;
>>> +                       #size-cells = <0>;
>>> +                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
>>> +                       reg = <0x3d40 0x40>;
>>> +                       interrupts = <2 16 0>;
>>> +                       fsl5200-clocking;
>> I believe fsl5200-clocking is no longer required.  There is a patch
>> pending which removes this property from the other .dts files.

Right, it obsolete.

> Ok, fix this.

Like it is, the I2C controller will use a fixed low speed fdt/dfsr
setting. You have two other options:

  fsl,preserve-clocking;
  clock-frequency = <400000>;

See also
http://lxr.linux.no/#linux+v2.6.31/Documentation/powerpc/dts-bindings/fsl/i2c.txt.

>>> +
>>> +                       hwmon@2c {
>>> +                               compatible = "ad,adm9240";
>>> +                               reg = <0x2c>;
>>> +                       };
>>> +                       rtc@51 {
>>> +                               compatible = "rtc,pcf8563";

rtc is not a proper vendor name. Should be nxp, IIRC.

Wolfgang.
Heiko Schocher - Sept. 15, 2009, 5:06 a.m.
Hello Wolfgang,

Wolfgang Grandegger wrote:
> Heiko Schocher wrote:
>> Hello Grant,
>>
>> Grant Likely wrote:
>>> Thanks for the patch.  Comments below.
>>>
>>> g.
>>>
>>> On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
>>>> - serial Console on PSC1
>>>> - 64MB SDRAM
>>>> - MTD CFI Flash
>>>> - Ethernet FEC
>>>> - I2C with PCF8563 and Temp. Sensor ADM9240
>>>> - IDE support
>>>>
>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
> ...snip....
> 
>>>> +               i2c@3d40 {
>>>> +                       #address-cells = <1>;
>>>> +                       #size-cells = <0>;
>>>> +                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
>>>> +                       reg = <0x3d40 0x40>;
>>>> +                       interrupts = <2 16 0>;
>>>> +                       fsl5200-clocking;
>>> I believe fsl5200-clocking is no longer required.  There is a patch
>>> pending which removes this property from the other .dts files.
> 
> Right, it obsolete.

OK, I remove it.

>> Ok, fix this.
> 
> Like it is, the I2C controller will use a fixed low speed fdt/dfsr
> setting. You have two other options:
> 
>   fsl,preserve-clocking;
>   clock-frequency = <400000>;
> 
> See also
> http://lxr.linux.no/#linux+v2.6.31/Documentation/powerpc/dts-bindings/fsl/i2c.txt.

Ah, ok, thanks for this info. I try this ...

>>>> +
>>>> +                       hwmon@2c {
>>>> +                               compatible = "ad,adm9240";
>>>> +                               reg = <0x2c>;
>>>> +                       };
>>>> +                       rtc@51 {
>>>> +                               compatible = "rtc,pcf8563";
> 
> rtc is not a proper vendor name. Should be nxp, IIRC.

OK, fix it.

Thanks for reviewing

bye
Heiko

Patch

diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 0000000..28e1c90
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,312 @@ 
+/*
+ * uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "man,uc101";
+	compatible = "man,uc101";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+			interrupts = <0 0 3>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer 1 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer 2 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer 3 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			device_type = "dma-controller";
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 {		// PSC2
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 {		// PSC6
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 6 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl5200-clocking;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "rtc,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+		sram@1,0 {
+			compatible = "sram";
+			reg = <1 0x100000 0x100000>;
+		};
+
+		gpio-controller-100@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600100 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-104@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600104 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-200@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600200 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-201@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600201 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-202@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600202 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-203@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600203 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-204@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600204 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-206@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600206 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-207@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x00600207 0x1>;
+				gpio-controller;
+		};
+		gpio-controller-20f@3,0 {
+				#gpio-cells = <2>;
+				compatible = "manroland,mucmc52-aux-gpio";
+				reg = <3 0x0060020f 0x1>;
+				gpio-controller;
+		};
+
+		display@3,0 {
+				device_type = "pdsp-display";
+				compatible = "pdsp-display";
+				reg = <3 0x00600000 0x1000>;
+		};
+	};
+
+};
diff --git a/arch/powerpc/configs/52xx/uc101_defconfig b/arch/powerpc/configs/52xx/uc101_defconfig
new file mode 100644
index 0000000..c2ae577
--- /dev/null
+++ b/arch/powerpc/configs/52xx/uc101_defconfig
@@ -0,0 +1,1303 @@ 
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Mon Sep 14 08:53:03 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_MPC52xx=y
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+CONFIG_SENSORS_ADM9240=y
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index 7794bd8..fd9f894 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -52,6 +52,7 @@  static void __init mpc5200_simple_setup_arch(void)
 static char *board[] __initdata = {
 	"intercontrol,digsy-mtc",
 	"man,mucmc52",
+	"man,uc101",
 	"phytec,pcm030",
 	"phytec,pcm032",
 	"promess,motionpro",