@@ -54,7 +54,7 @@
#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11
#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \
- (GPMI_IS_MX6Q(x) \
+ (GPMI_IS_MX6(x) \
? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \
& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \
: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \
@@ -65,7 +65,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \
(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \
- ((GPMI_IS_MX6Q(x) && ((v) == 14)) \
+ ((GPMI_IS_MX6(x) && ((v) == 14)) \
? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \
& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \
: 0 \
@@ -77,7 +77,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \
- (GPMI_IS_MX6Q(x) \
+ (GPMI_IS_MX6(x) \
? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
)
@@ -96,7 +96,7 @@
#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11
#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \
- (GPMI_IS_MX6Q(x) \
+ (GPMI_IS_MX6(x) \
? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \
& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \
: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \
@@ -107,7 +107,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \
(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \
- ((GPMI_IS_MX6Q(x) && ((v) == 14)) \
+ ((GPMI_IS_MX6(x) && ((v) == 14)) \
? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \
& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \
: 0 \
@@ -119,7 +119,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \
- (GPMI_IS_MX6Q(x) \
+ (GPMI_IS_MX6(x) \
? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
)
@@ -971,7 +971,7 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
struct nand_chip *chip = &this->nand;
/* Enable the asynchronous EDO feature. */
- if (GPMI_IS_MX6Q(this) && chip->onfi_version) {
+ if (GPMI_IS_MX6(this) && chip->onfi_version) {
int mode = onfi_get_async_timing_mode(chip);
/* We only support the timing mode 4 and mode 5. */
@@ -1093,12 +1093,12 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
if (GPMI_IS_MX23(this)) {
mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
- } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+ } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
/*
* In the imx6, all the ready/busy pins are bound
* together. So we only need to check chip 0.
*/
- if (GPMI_IS_MX6Q(this))
+ if (GPMI_IS_MX6(this))
chip = 0;
/* MX28 shares the same R/B register as MX6Q. */
@@ -71,6 +71,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
.max_chain_delay = 12,
};
+static const struct gpmi_devdata gpmi_devdata_imx6sx = {
+ .type = IS_MX6SX,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12,
+};
+
static irqreturn_t bch_irq(int irq, void *cookie)
{
struct gpmi_nand_data *this = cookie;
@@ -583,7 +589,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
}
/* Get extra clocks */
- if (GPMI_IS_MX6Q(this))
+ if (GPMI_IS_MX6(this))
extra_clks = extra_clks_for_mx6q;
if (!extra_clks)
return 0;
@@ -601,9 +607,9 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
r->clock[i] = clk;
}
- if (GPMI_IS_MX6Q(this))
+ if (GPMI_IS_MX6(this))
/*
- * Set the default value for the gpmi clock in mx6q:
+ * Set the default value for the gpmi clock.
*
* If you want to use the ONFI nand which is in the
* Synchronous Mode, you should change the clock as you need.
@@ -1666,7 +1672,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
* (1) the chip is imx6, and
* (2) the size of the ECC parity is byte aligned.
*/
- if (GPMI_IS_MX6Q(this) &&
+ if (GPMI_IS_MX6(this) &&
((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
ecc->read_subpage = gpmi_ecc_read_subpage;
chip->options |= NAND_SUBPAGE_READ;
@@ -1722,7 +1728,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- ret = nand_scan_ident(mtd, GPMI_IS_MX6Q(this) ? 2 : 1, NULL);
+ ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
if (ret)
goto err_out;
@@ -1761,6 +1767,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
}, {
.compatible = "fsl,imx6q-gpmi-nand",
.data = (void *)&gpmi_devdata_imx6q,
+ }, {
+ .compatible = "fsl,imx6sx-gpmi-nand",
+ .data = (void *)&gpmi_devdata_imx6sx,
}, {}
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
@@ -122,7 +122,8 @@ struct nand_timing {
enum gpmi_type {
IS_MX23,
IS_MX28,
- IS_MX6Q
+ IS_MX6Q,
+ IS_MX6SX
};
struct gpmi_devdata {
@@ -298,4 +299,7 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
+
+#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
#endif
The gpmi's IP for imx6sx is nearly the same as the gpmi's IP for imx6q, except the following two new features: (1) the new BCH contoller has 62-BIT correcting ECC strength (The BCH for imx6q only has 40-BIT ECC strength). (2) add the hardware Randomizer support. This patch does the follow changes: (1) add a new macro GPMI_IS_MX6SX to represent the imx6sx's gpmi. (2) add a new macro GPMI_IS_MX6. We use this macro to initialize the same registers for both imx6sx and imx6q, and so on. (3) add a new gpmi_devdata instance, the gpmi_devdata_imx6sx, for imx6sx. Signed-off-by: Huang Shijie <b32955@freescale.com> --- This patch depends on the patch: "mtd: gpmi: add gpmi_devdata{} to simplify the code" http://lists.infradead.org/pipermail/linux-mtd/2014-March/052793.html --- drivers/mtd/nand/gpmi-nand/bch-regs.h | 12 ++++++------ drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 +++--- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 19 ++++++++++++++----- drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +++++- 4 files changed, 28 insertions(+), 15 deletions(-)