[U-Boot,v2,4/9] sunxi: initial generic sun7i cpu, board and start of day support

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 3485404..d85b647 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -9,5 +9,16 @@ 
 #
 obj-y	+= timer.o
 obj-y	+= dram.o
+obj-y	+= board.o
 obj-y	+= clock.o
 obj-y	+= pinmux.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y	+= cpu_info.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_FEL
+obj-y	+= start.o
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
new file mode 100644
index 0000000..4a29b4b
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -0,0 +1,88 @@ 
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+#ifdef CONFIG_SPL_BUILD
+/* Pointer to the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+	return MMCSD_MODE_RAW;
+}
+#endif
+
+int gpio_init(void)
+{
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+	sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+/* do some early init */
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I
+	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 1\n"
+		"orr r0, r0, #0x40\n"
+		"mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+
+	clock_init();
+	timer_init();
+	gpio_init();
+
+#ifdef CONFIG_SPL_BUILD
+	gd = &gdata;
+	preloader_console_init();
+
+	sunxi_board_init();
+#endif
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
new file mode 100644
index 0000000..b4c3d5c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -0,0 +1,19 @@ 
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	puts("CPU:   Allwinner A20 (SUN7I)\n");
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c
new file mode 100644
index 0000000..6b392fa
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/start.c
@@ -0,0 +1 @@ 
+/* Intentionally empty. Only needed to get FEL SPL link line right */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
new file mode 100644
index 0000000..9330058
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -0,0 +1,122 @@ 
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_H
+#define _SUNXI_CPU_H
+
+#define SUNXI_SRAM_A1_BASE		0x00000000
+#define SUNXI_SRAM_A1_SIZE		(16 * 1024)	/* 16 kiB */
+
+#define SUNXI_SRAM_A2_BASE		0x00004000	/* 16 kiB */
+#define SUNXI_SRAM_A3_BASE		0x00008000	/* 13 kiB */
+#define SUNXI_SRAM_A4_BASE		0x0000b400	/* 3 kiB */
+#define SUNXI_SRAM_D_BASE		0x01c00000
+#define SUNXI_SRAM_B_BASE		0x01c00000	/* 64 kiB (secure) */
+
+#define SUNXI_SRAMC_BASE		0x01c00000
+#define SUNXI_DRAMC_BASE		0x01c01000
+#define SUNXI_DMA_BASE			0x01c02000
+#define SUNXI_NFC_BASE			0x01c03000
+#define SUNXI_TS_BASE			0x01c04000
+#define SUNXI_SPI0_BASE			0x01c05000
+#define SUNXI_SPI1_BASE			0x01c06000
+#define SUNXI_MS_BASE			0x01c07000
+#define SUNXI_TVD_BASE			0x01c08000
+#define SUNXI_CSI0_BASE			0x01c09000
+#define SUNXI_TVE0_BASE			0x01c0a000
+#define SUNXI_EMAC_BASE			0x01c0b000
+#define SUNXI_LCD0_BASE			0x01c0C000
+#define SUNXI_LCD1_BASE			0x01c0d000
+#define SUNXI_VE_BASE			0x01c0e000
+#define SUNXI_MMC0_BASE			0x01c0f000
+#define SUNXI_MMC1_BASE			0x01c10000
+#define SUNXI_MMC2_BASE			0x01c11000
+#define SUNXI_MMC3_BASE			0x01c12000
+#define SUNXI_USB0_BASE			0x01c13000
+#define SUNXI_USB1_BASE			0x01c14000
+#define SUNXI_SS_BASE			0x01c15000
+#define SUNXI_HDMI_BASE			0x01c16000
+#define SUNXI_SPI2_BASE			0x01c17000
+#define SUNXI_SATA_BASE			0x01c18000
+#define SUNXI_PATA_BASE			0x01c19000
+#define SUNXI_ACE_BASE			0x01c1a000
+#define SUNXI_TVE1_BASE			0x01c1b000
+#define SUNXI_USB2_BASE			0x01c1c000
+#define SUNXI_CSI1_BASE			0x01c1d000
+#define SUNXI_TZASC_BASE		0x01c1e000
+#define SUNXI_SPI3_BASE			0x01c1f000
+
+#define SUNXI_CCM_BASE			0x01c20000
+#define SUNXI_INTC_BASE			0x01c20400
+#define SUNXI_PIO_BASE			0x01c20800
+#define SUNXI_TIMER_BASE		0x01c20c00
+#define SUNXI_SPDIF_BASE		0x01c21000
+#define SUNXI_AC97_BASE			0x01c21400
+#define SUNXI_IR0_BASE			0x01c21800
+#define SUNXI_IR1_BASE			0x01c21c00
+
+#define SUNXI_IIS_BASE			0x01c22400
+#define SUNXI_LRADC_BASE		0x01c22800
+#define SUNXI_AD_DA_BASE		0x01c22c00
+#define SUNXI_KEYPAD_BASE		0x01c23000
+#define SUNXI_TZPC_BASE			0x01c23400
+#define SUNXI_SID_BASE			0x01c23800
+#define SUNXI_SJTAG_BASE		0x01c23c00
+
+#define SUNXI_TP_BASE			0x01c25000
+#define SUNXI_PMU_BASE			0x01c25400
+#define SUNXI_CPUCFG_BASE		0x01c25c00	/* sun7i only ? */
+
+#define SUNXI_UART0_BASE		0x01c28000
+#define SUNXI_UART1_BASE		0x01c28400
+#define SUNXI_UART2_BASE		0x01c28800
+#define SUNXI_UART3_BASE		0x01c28c00
+#define SUNXI_UART4_BASE		0x01c29000
+#define SUNXI_UART5_BASE		0x01c29400
+#define SUNXI_UART6_BASE		0x01c29800
+#define SUNXI_UART7_BASE		0x01c29c00
+#define SUNXI_PS2_0_BASE		0x01c2a000
+#define SUNXI_PS2_1_BASE		0x01c2a400
+
+#define SUNXI_TWI0_BASE			0x01c2ac00
+#define SUNXI_TWI1_BASE			0x01c2b000
+#define SUNXI_TWI2_BASE			0x01c2b400
+
+#define SUNXI_CAN_BASE			0x01c2bc00
+
+#define SUNXI_SCR_BASE			0x01c2c400
+
+#define SUNXI_GPS_BASE			0x01c30000
+#define SUNXI_MALI400_BASE		0x01c40000
+#define SUNXI_GMAC_BASE			0x01c50000
+
+/* module sram */
+#define SUNXI_SRAM_C_BASE		0x01d00000
+
+#define SUNXI_DE_FE0_BASE		0x01e00000
+#define SUNXI_DE_FE1_BASE		0x01e20000
+#define SUNXI_DE_BE0_BASE		0x01e60000
+#define SUNXI_DE_BE1_BASE		0x01e40000
+#define SUNXI_MP_BASE			0x01e80000
+#define SUNXI_AVG_BASE			0x01ea0000
+
+/* CoreSight Debug Module */
+#define SUNXI_CSDM_BASE			0x3f500000
+
+#define SUNXI_DDRII_DDRIII_BASE		0x40000000	/* 2 GiB */
+
+#define SUNXI_BROM_BASE			0xffff0000	/* 32 kiB */
+
+#define SUNXI_CPU_CFG			(SUNXI_TIMER_BASE + 0x13c)
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+extern void sunxi_reset(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _CPU_H */
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
new file mode 100644
index 0000000..559112e
--- /dev/null
+++ b/board/sunxi/Makefile
@@ -0,0 +1,11 @@ 
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other board Makefile
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+obj-y	+= board.o
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
new file mode 100644
index 0000000..328334a
--- /dev/null
+++ b/board/sunxi/board.c
@@ -0,0 +1,57 @@ 
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some board init for the Allwinner A10-evb board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* add board specific code here */
+int board_init(void)
+{
+	int id_pfr1;
+
+	gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
+
+	asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
+	debug("id_pfr1: 0x%08x\n", id_pfr1);
+	/* Generic Timer Extension available? */
+	if ((id_pfr1 >> 16) & 0xf) {
+		debug("Setting CNTFRQ\n");
+		/* CNTFRQ == 24 MHz */
+		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
+	}
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void sunxi_board_init(void)
+{
+	unsigned long ramsize;
+
+	printf("DRAM:");
+	ramsize = sunxi_dram_init();
+	printf(" %lu MiB\n", ramsize >> 20);
+	if (!ramsize)
+		hang();
+}
+#endif