Patchwork [v7,3/4] mtd: devices: elm: configure parallel channels based on ecc_steps

login
register
mail settings
Submitter pekon gupta
Date March 20, 2014, 7:21 a.m.
Message ID <1395300118-32202-4-git-send-email-pekon@ti.com>
Download mbox | patch
Permalink /patch/332009/
State New
Headers show

Comments

pekon gupta - March 20, 2014, 7:21 a.m.
ELM hardware can process up to maximum of 8 hannels in parallel for
ECC error detection. Currently the number of channels getting configured for
processing is static determined by macro ERROR_VECTOR_MAX. However, the actual
number of channels that need to be processed is the ECC step number.
This patch just avoids configuring extra unused channels.

Signed-off-by: Pekon Gupta <pekon@ti.com>
---
 drivers/mtd/devices/elm.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index a19a833..271da6e 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -84,6 +84,7 @@  struct elm_info {
 	struct list_head list;
 	enum bch_ecc bch_type;
 	struct elm_registers elm_regs;
+	int ecc_steps;
 	int ecc_step_bytes;
 };
 
@@ -128,6 +129,7 @@  int elm_config(struct device *dev, enum bch_ecc bch_type,
 	reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
 	elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
 	info->bch_type		= bch_type;
+	info->ecc_steps		= ecc_steps;
 	info->ecc_step_bytes	= ecc_step_bytes;
 
 	return 0;
@@ -170,7 +172,7 @@  static void elm_load_syndrome(struct elm_info *info,
 	int i, offset;
 	u32 val;
 
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 
 		/* Check error reported */
 		if (err_vec[i].error_reported) {
@@ -238,7 +240,7 @@  static void elm_start_processing(struct elm_info *info,
 	 * Set syndrome vector valid, so that ELM module
 	 * will process it for vectors error is reported
 	 */
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 		if (err_vec[i].error_reported) {
 			offset = ELM_SYNDROME_FRAGMENT_6 +
 				SYNDROME_FRAGMENT_REG_SIZE * i;
@@ -267,7 +269,7 @@  static void elm_error_correction(struct elm_info *info,
 	int offset;
 	u32 reg_val;
 
-	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+	for (i = 0; i < info->ecc_steps; i++) {
 
 		/* Check error reported */
 		if (err_vec[i].error_reported) {