diff mbox

[PATCHv2,5/8] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel

Message ID 1395130547-18633-6-git-send-email-tomi.valkeinen@ti.com
State Accepted, archived
Commit e433333b6999aa105a35d1ea1ce03db6b025d931
Headers show

Commit Message

Tomi Valkeinen March 18, 2014, 8:15 a.m. UTC 
Add DT binding documentation for MIPI DSI Command Mode Panel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
---
 .../devicetree/bindings/video/panel-dsi-cm.txt     | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/panel-dsi-cm.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
new file mode 100644
index 000000000000..dce48eb9db57
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
@@ -0,0 +1,29 @@ 
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};