@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -668,6 +669,7 @@ static struct irq_chip sunxi_pinctrl_irq_chip = {
static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
@@ -677,10 +679,12 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
if (reg) {
int irqoffset;
+ chained_irq_enter(chip, desc);
for_each_set_bit(irqoffset, ®, SUNXI_IRQ_NUMBER) {
int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
generic_handle_irq(pin_irq);
}
+ chained_irq_exit(chip, desc);
}
}
This is a note to let you know that I have just added a patch titled pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.11.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Luis ------ From 3196ca42d10423801a25e38fb736ca6d45def6b6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai <wens@csie.org> Date: Tue, 11 Feb 2014 00:22:37 +0800 Subject: pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility commit 905a5117e79367b7e58ae046d12ca9961f048c89 upstream. On tha Allwinner A20 SoC, the external interrupts on the pin controller device are connected to the GIC. Without chained_irq_{enter, exit}, external GPIO interrupts, such as used by mmc core card detect, cause the system to hang. This issue was first encountered during my attempt to get out-of-band interrupts for WiFi on the Cubietruck working. With David's new series of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card detection, removing the SD card also causes my Cubietruck to hang. This problem should extend to all Allwinner A20 based boards. With this fix, the system no longer hangs when I remove or insert the SD card. /proc/interrupts show that the interrupt has correctly fired. However the system still does not detect card removal/insertion. I believe this is another unrelated issue. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> --- drivers/pinctrl/pinctrl-sunxi.c | 4 ++++ 1 file changed, 4 insertions(+) -- 1.9.0