diff mbox

[net-next,v2,8/9] dp83640: let external input pins from the module parameters be defaults.

Message ID d6b7d01cb28c08a11afbc74bb47cefcce7a7e5ce.1394975663.git.richardcochran@gmail.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Richard Cochran March 16, 2014, 1:29 p.m. UTC 
This patch changes the driver to use the new pin configuration method when
programming the external time stamp input signals.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
---
 drivers/net/phy/dp83640.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 43b583b..93db564 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -468,7 +468,10 @@  static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 		event_num = EXT_EVENT + index;
 		evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
 		if (on) {
-			gpio_num = gpio_tab[EXTTS0_GPIO + index];
+			gpio_num = 1 + ptp_find_pin(clock->ptp_clock,
+						    PTP_PF_EXTTS, index);
+			if (gpio_num < 1)
+				return -EINVAL;
 			evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
 			if (rq->extts.flags & PTP_FALLING_EDGE)
 				evnt |= EVNT_FALL;