Patchwork [v3,5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB

login
register
mail settings
Submitter Ezequiel Garcia
Date March 13, 2014, 8:24 p.m.
Message ID <1394742273-5113-6-git-send-email-ezequiel.garcia@free-electrons.com>
Download mbox | patch
Permalink /patch/330130/
State Not Applicable
Headers show

Comments

Ezequiel Garcia - March 13, 2014, 8:24 p.m.
The Armada 385-DB board has a NAND flash, so enable it in the
devicetree and add the partitions as prepared in the factory images.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 arch/arm/boot/dts/armada-385-db.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 9a13642..6828d77 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -80,6 +80,27 @@ 
 					reg = <1>;
 				};
 			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
 		};
 
 		pcie-controller {