Message ID | 1394605864-32237-8-git-send-email-famz@redhat.com |
---|---|
State | New |
Headers | show |
The Wednesday 12 Mar 2014 à 14:31:02 (+0800), Fam Zheng wrote : > This allows to put the dirty bitmap into a disabled state where no more > writes will be tracked. > > It will be used before backup or writing to persistent file. > > Signed-off-by: Fam Zheng <famz@redhat.com> > --- > block.c | 15 +++++++++++++++ > blockdev.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ > include/block/block.h | 2 ++ > qapi-schema.json | 32 ++++++++++++++++++++++++++++++++ > qmp-commands.hx | 10 ++++++++++ > 5 files changed, 103 insertions(+) > > diff --git a/block.c b/block.c > index 199a465..1530fd1 100644 > --- a/block.c > +++ b/block.c > @@ -55,6 +55,7 @@ struct BdrvDirtyBitmap { > int64_t size; > int64_t granularity; > char *name; > + bool enabled; > QLIST_ENTRY(BdrvDirtyBitmap) list; > }; > > @@ -5120,6 +5121,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, > if (name) { > bitmap->name = g_strdup(name); > } > + bitmap->enabled = true; > QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list); > return bitmap; > } > @@ -5138,6 +5140,16 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > } > } > > +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > +{ > + bitmap->enabled = false; > +} > + > +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > +{ > + bitmap->enabled = true; > +} > + > BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) > { > BdrvDirtyBitmap *bm; > @@ -5186,6 +5198,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, > { > BdrvDirtyBitmap *bitmap; > QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { > + if (!bitmap->enabled) { > + continue; > + } > hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors); > } > } > diff --git a/blockdev.c b/blockdev.c > index 662c950..aa3ee55 100644 > --- a/blockdev.c > +++ b/blockdev.c > @@ -1773,6 +1773,50 @@ void qmp_dirty_bitmap_remove(const char *device, const char *name, > bdrv_release_dirty_bitmap(bs, bitmap); > } > > +void qmp_dirty_bitmap_enable(const char *device, const char *name, > + bool has_granularity, int64_t granularity, What is the use of this line ? > + Error **errp) > +{ > + BlockDriverState *bs; > + BdrvDirtyBitmap *bitmap; > + > + bs = bdrv_find(device); > + if (!bs) { > + error_set(errp, QERR_DEVICE_NOT_FOUND, device); > + return; > + } > + > + bitmap = bdrv_find_dirty_bitmap(bs, name); > + if (!bitmap) { > + error_setg(errp, "Dirty bitmap not found: %s", name); > + return; > + } > + > + bdrv_enable_dirty_bitmap(bs, bitmap); > +} > + > +void qmp_dirty_bitmap_disable(const char *device, const char *name, > + bool has_granularity, int64_t granularity, Same question ? > + Error **errp) > +{ > + BlockDriverState *bs; > + BdrvDirtyBitmap *bitmap; > + > + bs = bdrv_find(device); > + if (!bs) { > + error_set(errp, QERR_DEVICE_NOT_FOUND, device); > + return; > + } > + > + bitmap = bdrv_find_dirty_bitmap(bs, name); > + if (!bitmap) { > + error_setg(errp, "Dirty bitmap not found: %s", name); > + return; > + } > + > + bdrv_disable_dirty_bitmap(bs, bitmap); > +} > + > int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data) > { > const char *id = qdict_get_str(qdict, "id"); > diff --git a/include/block/block.h b/include/block/block.h > index 66aae57..2875d7d 100644 > --- a/include/block/block.h > +++ b/include/block/block.h > @@ -449,6 +449,8 @@ BdrvDirtyBitmap *bdrv_copy_dirty_bitmap(BlockDriverState *bs, > const BdrvDirtyBitmap *bitmap, > const char *name); > void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs); > int bdrv_dirty_bitmap_granularity(BlockDriverState *bs, > BdrvDirtyBitmap *bitmap); > diff --git a/qapi-schema.json b/qapi-schema.json > index 632bb10..f8cd6b8 100644 > --- a/qapi-schema.json > +++ b/qapi-schema.json > @@ -2225,6 +2225,38 @@ > 'data': { 'device': 'str', 'name': 'str' } } > > ## > +# @dirty-bitmap-enable > +# > +# Enable a dirty bitmap on the device > +# > +# Setting granularity has no effect here. > +# > +# Returns: nothing on success > +# If @device is not a valid block device, DeviceNotFound > +# If @name is not found, GenericError with an explaining message > +# > +# Since 2.1 > +## > +{'command': 'dirty-bitmap-enable', > + 'data': 'DirtyBitmap' } > + > +## > +# @dirty-bitmap-disable > +# > +# Disable a dirty bitmap on the device > +# > +# Setting granularity has no effect here. > +# > +# Returns: nothing on success > +# If @device is not a valid block device, DeviceNotFound > +# If @name is not found, GenericError with an explaining message > +# > +# Since 2.1 > +## > +{'command': 'dirty-bitmap-disable', > + 'data': 'DirtyBitmap' } Granularity is not defined on the QMP interface. Does it even compile ? > + > +## > # @migrate_cancel > # > # Cancel the current executing migration process. > diff --git a/qmp-commands.hx b/qmp-commands.hx > index c42516d..205343b 100644 > --- a/qmp-commands.hx > +++ b/qmp-commands.hx > @@ -1194,6 +1194,16 @@ EQMP > .args_type = "device:B,name:s", > .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_remove, > }, > + { > + .name = "dirty-bitmap-enable", > + .args_type = "device:B,name:s", > + .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_enable, > + }, > + { > + .name = "dirty-bitmap-disable", > + .args_type = "device:B,name:s", > + .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_disable, > + }, > > SQMP > > -- > 1.9.0 > >
On Thu, 03/13 14:55, Benoît Canet wrote: > The Wednesday 12 Mar 2014 à 14:31:02 (+0800), Fam Zheng wrote : > > This allows to put the dirty bitmap into a disabled state where no more > > writes will be tracked. > > > > It will be used before backup or writing to persistent file. > > > > Signed-off-by: Fam Zheng <famz@redhat.com> > > --- > > block.c | 15 +++++++++++++++ > > blockdev.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ > > include/block/block.h | 2 ++ > > qapi-schema.json | 32 ++++++++++++++++++++++++++++++++ > > qmp-commands.hx | 10 ++++++++++ > > 5 files changed, 103 insertions(+) > > > > diff --git a/block.c b/block.c > > index 199a465..1530fd1 100644 > > --- a/block.c > > +++ b/block.c > > @@ -55,6 +55,7 @@ struct BdrvDirtyBitmap { > > int64_t size; > > int64_t granularity; > > char *name; > > + bool enabled; > > QLIST_ENTRY(BdrvDirtyBitmap) list; > > }; > > > > @@ -5120,6 +5121,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, > > if (name) { > > bitmap->name = g_strdup(name); > > } > > + bitmap->enabled = true; > > QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list); > > return bitmap; > > } > > @@ -5138,6 +5140,16 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > > } > > } > > > > +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > > +{ > > + bitmap->enabled = false; > > +} > > + > > +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) > > +{ > > + bitmap->enabled = true; > > +} > > + > > BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) > > { > > BdrvDirtyBitmap *bm; > > @@ -5186,6 +5198,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, > > { > > BdrvDirtyBitmap *bitmap; > > QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { > > + if (!bitmap->enabled) { > > + continue; > > + } > > hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors); > > } > > } > > diff --git a/blockdev.c b/blockdev.c > > index 662c950..aa3ee55 100644 > > --- a/blockdev.c > > +++ b/blockdev.c > > @@ -1773,6 +1773,50 @@ void qmp_dirty_bitmap_remove(const char *device, const char *name, > > bdrv_release_dirty_bitmap(bs, bitmap); > > } > > > > +void qmp_dirty_bitmap_enable(const char *device, const char *name, > > > + bool has_granularity, int64_t granularity, > What is the use of this line ? Not useful for this command, but it's good to make the bitmap friends family reuse the same data (DirtyBitmap, see below), especially for transaction support. > > > + Error **errp) > > +{ > > + BlockDriverState *bs; > > + BdrvDirtyBitmap *bitmap; > > + > > + bs = bdrv_find(device); > > + if (!bs) { > > + error_set(errp, QERR_DEVICE_NOT_FOUND, device); > > + return; > > + } > > + > > + bitmap = bdrv_find_dirty_bitmap(bs, name); > > + if (!bitmap) { > > + error_setg(errp, "Dirty bitmap not found: %s", name); > > + return; > > + } > > + > > + bdrv_enable_dirty_bitmap(bs, bitmap); > > +} > > + > > +void qmp_dirty_bitmap_disable(const char *device, const char *name, > > > + bool has_granularity, int64_t granularity, > Same question ? Same answer :) > > > + Error **errp) > > +{ > > + BlockDriverState *bs; > > + BdrvDirtyBitmap *bitmap; > > + > > + bs = bdrv_find(device); > > + if (!bs) { > > + error_set(errp, QERR_DEVICE_NOT_FOUND, device); > > + return; > > + } > > + > > + bitmap = bdrv_find_dirty_bitmap(bs, name); > > + if (!bitmap) { > > + error_setg(errp, "Dirty bitmap not found: %s", name); > > + return; > > + } > > + > > + bdrv_disable_dirty_bitmap(bs, bitmap); > > +} > > + > > int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data) > > { > > const char *id = qdict_get_str(qdict, "id"); > > diff --git a/include/block/block.h b/include/block/block.h > > index 66aae57..2875d7d 100644 > > --- a/include/block/block.h > > +++ b/include/block/block.h > > @@ -449,6 +449,8 @@ BdrvDirtyBitmap *bdrv_copy_dirty_bitmap(BlockDriverState *bs, > > const BdrvDirtyBitmap *bitmap, > > const char *name); > > void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > > +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > > +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); > > BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs); > > int bdrv_dirty_bitmap_granularity(BlockDriverState *bs, > > BdrvDirtyBitmap *bitmap); > > diff --git a/qapi-schema.json b/qapi-schema.json > > index 632bb10..f8cd6b8 100644 > > --- a/qapi-schema.json > > +++ b/qapi-schema.json > > @@ -2225,6 +2225,38 @@ > > 'data': { 'device': 'str', 'name': 'str' } } > > > > ## > > +# @dirty-bitmap-enable > > +# > > +# Enable a dirty bitmap on the device > > +# > > +# Setting granularity has no effect here. > > +# > > +# Returns: nothing on success > > +# If @device is not a valid block device, DeviceNotFound > > +# If @name is not found, GenericError with an explaining message > > +# > > +# Since 2.1 > > +## > > +{'command': 'dirty-bitmap-enable', > > + 'data': 'DirtyBitmap' } > > + > > +## > > +# @dirty-bitmap-disable > > +# > > +# Disable a dirty bitmap on the device > > +# > > +# Setting granularity has no effect here. > > +# > > +# Returns: nothing on success > > +# If @device is not a valid block device, DeviceNotFound > > +# If @name is not found, GenericError with an explaining message > > +# > > +# Since 2.1 > > +## > > +{'command': 'dirty-bitmap-disable', > > + 'data': 'DirtyBitmap' } > > Granularity is not defined on the QMP interface. Does it even compile ? Yes it is defined in DirtyBitmap. See patch 2. Thanks, Fam
diff --git a/block.c b/block.c index 199a465..1530fd1 100644 --- a/block.c +++ b/block.c @@ -55,6 +55,7 @@ struct BdrvDirtyBitmap { int64_t size; int64_t granularity; char *name; + bool enabled; QLIST_ENTRY(BdrvDirtyBitmap) list; }; @@ -5120,6 +5121,7 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, if (name) { bitmap->name = g_strdup(name); } + bitmap->enabled = true; QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list); return bitmap; } @@ -5138,6 +5140,16 @@ void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) } } +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = false; +} + +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) +{ + bitmap->enabled = true; +} + BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) { BdrvDirtyBitmap *bm; @@ -5186,6 +5198,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, { BdrvDirtyBitmap *bitmap; QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { + if (!bitmap->enabled) { + continue; + } hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors); } } diff --git a/blockdev.c b/blockdev.c index 662c950..aa3ee55 100644 --- a/blockdev.c +++ b/blockdev.c @@ -1773,6 +1773,50 @@ void qmp_dirty_bitmap_remove(const char *device, const char *name, bdrv_release_dirty_bitmap(bs, bitmap); } +void qmp_dirty_bitmap_enable(const char *device, const char *name, + bool has_granularity, int64_t granularity, + Error **errp) +{ + BlockDriverState *bs; + BdrvDirtyBitmap *bitmap; + + bs = bdrv_find(device); + if (!bs) { + error_set(errp, QERR_DEVICE_NOT_FOUND, device); + return; + } + + bitmap = bdrv_find_dirty_bitmap(bs, name); + if (!bitmap) { + error_setg(errp, "Dirty bitmap not found: %s", name); + return; + } + + bdrv_enable_dirty_bitmap(bs, bitmap); +} + +void qmp_dirty_bitmap_disable(const char *device, const char *name, + bool has_granularity, int64_t granularity, + Error **errp) +{ + BlockDriverState *bs; + BdrvDirtyBitmap *bitmap; + + bs = bdrv_find(device); + if (!bs) { + error_set(errp, QERR_DEVICE_NOT_FOUND, device); + return; + } + + bitmap = bdrv_find_dirty_bitmap(bs, name); + if (!bitmap) { + error_setg(errp, "Dirty bitmap not found: %s", name); + return; + } + + bdrv_disable_dirty_bitmap(bs, bitmap); +} + int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data) { const char *id = qdict_get_str(qdict, "id"); diff --git a/include/block/block.h b/include/block/block.h index 66aae57..2875d7d 100644 --- a/include/block/block.h +++ b/include/block/block.h @@ -449,6 +449,8 @@ BdrvDirtyBitmap *bdrv_copy_dirty_bitmap(BlockDriverState *bs, const BdrvDirtyBitmap *bitmap, const char *name); void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); +void bdrv_disable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); +void bdrv_enable_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs); int bdrv_dirty_bitmap_granularity(BlockDriverState *bs, BdrvDirtyBitmap *bitmap); diff --git a/qapi-schema.json b/qapi-schema.json index 632bb10..f8cd6b8 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -2225,6 +2225,38 @@ 'data': { 'device': 'str', 'name': 'str' } } ## +# @dirty-bitmap-enable +# +# Enable a dirty bitmap on the device +# +# Setting granularity has no effect here. +# +# Returns: nothing on success +# If @device is not a valid block device, DeviceNotFound +# If @name is not found, GenericError with an explaining message +# +# Since 2.1 +## +{'command': 'dirty-bitmap-enable', + 'data': 'DirtyBitmap' } + +## +# @dirty-bitmap-disable +# +# Disable a dirty bitmap on the device +# +# Setting granularity has no effect here. +# +# Returns: nothing on success +# If @device is not a valid block device, DeviceNotFound +# If @name is not found, GenericError with an explaining message +# +# Since 2.1 +## +{'command': 'dirty-bitmap-disable', + 'data': 'DirtyBitmap' } + +## # @migrate_cancel # # Cancel the current executing migration process. diff --git a/qmp-commands.hx b/qmp-commands.hx index c42516d..205343b 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -1194,6 +1194,16 @@ EQMP .args_type = "device:B,name:s", .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_remove, }, + { + .name = "dirty-bitmap-enable", + .args_type = "device:B,name:s", + .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_enable, + }, + { + .name = "dirty-bitmap-disable", + .args_type = "device:B,name:s", + .mhandler.cmd_new = qmp_marshal_input_dirty_bitmap_disable, + }, SQMP
This allows to put the dirty bitmap into a disabled state where no more writes will be tracked. It will be used before backup or writing to persistent file. Signed-off-by: Fam Zheng <famz@redhat.com> --- block.c | 15 +++++++++++++++ blockdev.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ include/block/block.h | 2 ++ qapi-schema.json | 32 ++++++++++++++++++++++++++++++++ qmp-commands.hx | 10 ++++++++++ 5 files changed, 103 insertions(+)