@@ -469,7 +469,7 @@ void e1000e_check_options(struct e1000_adapter *adapter);
void e1000e_set_ethtool_ops(struct net_device *netdev);
int e1000e_up(struct e1000_adapter *adapter);
-void e1000e_down(struct e1000_adapter *adapter);
+void e1000e_down(struct e1000_adapter *adapter, bool reset);
void e1000e_reinit_locked(struct e1000_adapter *adapter);
void e1000e_reset(struct e1000_adapter *adapter);
void e1000e_power_up_phy(struct e1000_adapter *adapter);
@@ -325,7 +325,7 @@ static int e1000_set_settings(struct net_device *netdev,
/* reset the link */
if (netif_running(adapter->netdev)) {
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
e1000e_up(adapter);
} else {
e1000e_reset(adapter);
@@ -373,7 +373,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
hw->fc.requested_mode = e1000_fc_default;
if (netif_running(adapter->netdev)) {
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
e1000e_up(adapter);
} else {
e1000e_reset(adapter);
@@ -719,7 +719,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
pm_runtime_get_sync(netdev->dev.parent);
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
/* We can't just free everything and then setup again, because the
* ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
@@ -3687,10 +3687,6 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
*/
static void e1000_power_down_phy(struct e1000_adapter *adapter)
{
- /* WoL is enabled */
- if (adapter->wol)
- return;
-
if (adapter->hw.phy.ops.power_down)
adapter->hw.phy.ops.power_down(&adapter->hw);
}
@@ -3907,10 +3903,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
}
if (!netif_running(adapter->netdev) &&
- !test_bit(__E1000_TESTING, &adapter->state)) {
+ !test_bit(__E1000_TESTING, &adapter->state))
e1000_power_down_phy(adapter);
- return;
- }
e1000_get_phy_info(hw);
@@ -3977,7 +3971,12 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
static void e1000e_update_stats(struct e1000_adapter *adapter);
-void e1000e_down(struct e1000_adapter *adapter)
+/**
+ * e1000e_down - quiesce the device and optionally reset the hardware
+ * @adapter: board private structure
+ * @reset: boolean flag to reset the hardware or not
+ */
+void e1000e_down(struct e1000_adapter *adapter, bool reset)
{
struct net_device *netdev = adapter->netdev;
struct e1000_hw *hw = &adapter->hw;
@@ -4031,12 +4030,8 @@ void e1000e_down(struct e1000_adapter *adapter)
e1000_lv_jumbo_workaround_ich8lan(hw, false))
e_dbg("failed to disable jumbo frame workaround mode\n");
- if (!pci_channel_offline(adapter->pdev))
+ if (reset && !pci_channel_offline(adapter->pdev))
e1000e_reset(adapter);
-
- /* TODO: for power management, we could drop the link and
- * pci_disable_device here.
- */
}
void e1000e_reinit_locked(struct e1000_adapter *adapter)
@@ -4044,7 +4039,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
might_sleep();
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000);
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
e1000e_up(adapter);
clear_bit(__E1000_RESETTING, &adapter->state);
}
@@ -4372,14 +4367,12 @@ static int e1000_close(struct net_device *netdev)
pm_runtime_get_sync(&pdev->dev);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
e1000_free_irq(adapter);
}
napi_disable(&adapter->napi);
- e1000_power_down_phy(adapter);
-
e1000e_free_tx_resources(adapter->tx_ring);
e1000e_free_rx_resources(adapter->rx_ring);
@@ -5686,7 +5679,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
@@ -5919,15 +5912,10 @@ release:
return retval;
}
-static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+static int e1000e_pm_freeze(struct device *dev)
{
- struct net_device *netdev = pci_get_drvdata(pdev);
+ struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, ctrl_ext, rctl, status;
- /* Runtime suspend should only enable wakeup for link changes */
- u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
- int retval = 0;
netif_device_detach(netdev);
@@ -5938,11 +5926,29 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
usleep_range(10000, 20000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
- e1000e_down(adapter);
+
+ /* Quiesce the device without resetting the hardware */
+ e1000e_down(adapter, false);
e1000_free_irq(adapter);
}
e1000e_reset_interrupt_capability(adapter);
+ /* Allow time for pending master requests to run */
+ e1000e_disable_pcie_master(&adapter->hw);
+
+ return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ /* Runtime suspend should only enable wakeup for link changes */
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+ int retval = 0;
+
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
@@ -5976,9 +5982,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
if (adapter->flags & FLAG_IS_ICH)
e1000_suspend_workarounds_ich8lan(&adapter->hw);
- /* Allow time for pending master requests to run */
- e1000e_disable_pcie_master(&adapter->hw);
-
if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
/* enable wakeup by the PHY */
retval = e1000_init_phy_wakeup(adapter, wufc);
@@ -5992,6 +5995,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
} else {
ew32(WUC, 0);
ew32(WUFC, 0);
+
+ e1000_power_down_phy(adapter);
}
if (adapter->hw.phy.type == e1000_phy_igp_3)
@@ -6114,7 +6119,6 @@ static int __e1000_resume(struct pci_dev *pdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u16 aspm_disable_flag = 0;
- u32 err;
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
aspm_disable_flag = PCIE_LINK_STATE_L0S;
@@ -6125,13 +6129,6 @@ static int __e1000_resume(struct pci_dev *pdev)
pci_set_master(pdev);
- e1000e_set_interrupt_capability(adapter);
- if (netif_running(netdev)) {
- err = e1000_request_irq(adapter);
- if (err)
- return err;
- }
-
if (hw->mac.type >= e1000_pch2lan)
e1000_resume_workarounds_pchlan(&adapter->hw);
@@ -6185,24 +6182,46 @@ static int __e1000_resume(struct pci_dev *pdev)
return 0;
}
+static int e1000e_pm_thaw(struct device *dev)
+{
+ struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000e_set_interrupt_capability(adapter);
+ if (netif_running(netdev)) {
+ u32 err = e1000_request_irq(adapter);
+
+ if (err)
+ return err;
+
+ e1000e_up(adapter);
+ }
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+
#ifdef CONFIG_PM_SLEEP
-static int e1000_suspend(struct device *dev)
+static int e1000e_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
+ e1000e_pm_freeze(dev);
+
return __e1000_shutdown(pdev, false);
}
-static int e1000_resume(struct device *dev)
+static int e1000e_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
+ int rc;
- if (e1000e_pm_ready(adapter))
- adapter->idle_check = true;
+ rc = __e1000_resume(pdev);
+ if (rc)
+ return rc;
- return __e1000_resume(pdev);
+ return e1000e_pm_thaw(dev);
}
#endif /* CONFIG_PM_SLEEP */
@@ -6254,6 +6273,8 @@ static int e1000_runtime_resume(struct device *dev)
static void e1000_shutdown(struct pci_dev *pdev)
{
+ e1000e_pm_freeze(&pdev->dev);
+
__e1000_shutdown(pdev, false);
}
@@ -6339,7 +6360,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
return PCI_ERS_RESULT_DISCONNECT;
if (netif_running(netdev))
- e1000e_down(adapter);
+ e1000e_down(adapter, true);
pci_disable_device(pdev);
/* Request a slot slot reset. */
@@ -6351,7 +6372,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the e1000_resume routine.
+ * resembles the first-half of the e1000e_pm_resume routine.
*/
static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
{
@@ -6398,7 +6419,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
*
* This callback is called when the error recovery driver tells us that
* its OK to resume normal operation. Implementation resembles the
- * second-half of the e1000_resume routine.
+ * second-half of the e1000e_pm_resume routine.
*/
static void e1000_io_resume(struct pci_dev *pdev)
{
@@ -6903,9 +6924,6 @@ static void e1000_remove(struct pci_dev *pdev)
}
}
- if (!(netdev->flags & IFF_UP))
- e1000_power_down_phy(adapter);
-
/* Don't lie to e1000_close() down the road. */
if (!down)
clear_bit(__E1000_DOWN, &adapter->state);
@@ -7027,7 +7045,12 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
static const struct dev_pm_ops e1000_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
+ .suspend = e1000e_pm_suspend,
+ .resume = e1000e_pm_resume,
+ .freeze = e1000e_pm_freeze,
+ .thaw = e1000e_pm_thaw,
+ .poweroff = e1000e_pm_suspend,
+ .restore = e1000e_pm_resume,
SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
e1000_idle)
};