Patchwork [v5,5/8,fix] mtd: m25p80: use the SPI nor framework

login
register
mail settings
Submitter Huang Shijie
Date Feb. 28, 2014, 7:55 a.m.
Message ID <1393574142-17234-1-git-send-email-b32955@freescale.com>
Download mbox | patch
Permalink /patch/325063/
State Accepted
Headers show

Comments

Huang Shijie - Feb. 28, 2014, 7:55 a.m.
Use the new SPI nor framework, and rewrite the m25p80:
 (0) remove all the NOR comands.
 (1) change the m25p->command to an array.
 (2) implement the necessary hooks, such as m25p80_read/m25p80_write.

Tested with the m25p32.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
add back the dependency information in the Kconfig. 

---
 drivers/mtd/devices/Kconfig  |    2 +-
 drivers/mtd/devices/m25p80.c | 1302 ++++--------------------------------------
 2 files changed, 106 insertions(+), 1198 deletions(-)
Brian Norris - April 9, 2014, 9:37 p.m.
+ Russell

On Fri, Feb 28, 2014 at 03:55:42PM +0800, Huang Shijie wrote:
> add back the dependency information in the Kconfig. 
> 
> ---
>  drivers/mtd/devices/Kconfig  |    2 +-
>  drivers/mtd/devices/m25p80.c | 1302 ++++--------------------------------------
>  2 files changed, 106 insertions(+), 1198 deletions(-)
> 
> diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
> index 0128138..004b17b 100644
> --- a/drivers/mtd/devices/Kconfig
> +++ b/drivers/mtd/devices/Kconfig
> @@ -80,7 +80,7 @@ config MTD_DATAFLASH_OTP
>  
>  config MTD_M25P80
>  	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
> -	depends on SPI_MASTER
> +	depends on SPI_MASTER && MTD_SPI_NOR_BASE
>  	help
>  	  This enables access to most modern SPI flash chips, used for
>  	  program and data storage.   Series supported include Atmel AT26DF,

Now that M25P80 depends on MTD_SPI_NOR_BASE (which I proposed to rename
to MTD_SPI_NOR a few hours ago), shouldn't we be updating everybody's
defconfigs? As it stands, the defconfigs that use M25P80 will just drop
it silently when built.

And if so, I'm not sure how this should be handled. Should defconfig
patches be sent to their respective arch maintainers?

Also, I think m25p80.c is no longer a "self-contained MTD device driver"
and should be moved under drivers/mtd/spi-nor/.

(Once these questions are settled, did you want to handle cooking the
patches, Huang, or should I?)

Brian
Huang Shijie - April 10, 2014, 7:25 a.m.
On Wed, Apr 09, 2014 at 02:37:49PM -0700, Brian Norris wrote:
> >  config MTD_M25P80
> >  	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
> > -	depends on SPI_MASTER
> > +	depends on SPI_MASTER && MTD_SPI_NOR_BASE
> >  	help
> >  	  This enables access to most modern SPI flash chips, used for
> >  	  program and data storage.   Series supported include Atmel AT26DF,
> 
> Now that M25P80 depends on MTD_SPI_NOR_BASE (which I proposed to rename
> to MTD_SPI_NOR a few hours ago), shouldn't we be updating everybody's
> defconfigs? As it stands, the defconfigs that use M25P80 will just drop
> it silently when built.
> 
> And if so, I'm not sure how this should be handled. Should defconfig
> patches be sent to their respective arch maintainers?

IMHO, we should create a patch or several patches to add the MTD_SPI_NOR
to the defconfigs.

Another method is to select the MTD_SPI_NOR which we enable the MTD.

> 
> Also, I think m25p80.c is no longer a "self-contained MTD device driver"
> and should be moved under drivers/mtd/spi-nor/.
If we move the m25p80.c to the drivers/mtd/spi-nor/, we also need to move
other drivers too.

thanks
Huang Shijie
Brian Norris - April 10, 2014, 7:29 p.m.
On Thu, Apr 10, 2014 at 03:25:11PM +0800, Huang Shijie wrote:
> On Wed, Apr 09, 2014 at 02:37:49PM -0700, Brian Norris wrote:
> > >  config MTD_M25P80
> > >  	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
> > > -	depends on SPI_MASTER
> > > +	depends on SPI_MASTER && MTD_SPI_NOR_BASE
> > >  	help
> > >  	  This enables access to most modern SPI flash chips, used for
> > >  	  program and data storage.   Series supported include Atmel AT26DF,
> > 
> > Now that M25P80 depends on MTD_SPI_NOR_BASE (which I proposed to rename
> > to MTD_SPI_NOR a few hours ago), shouldn't we be updating everybody's
> > defconfigs? As it stands, the defconfigs that use M25P80 will just drop
> > it silently when built.
> > 
> > And if so, I'm not sure how this should be handled. Should defconfig
> > patches be sent to their respective arch maintainers?
> 
> IMHO, we should create a patch or several patches to add the MTD_SPI_NOR
> to the defconfigs.

Yeah, I think that's best.

> Another method is to select the MTD_SPI_NOR which we enable the MTD.

I'm pretty sure it's a rule that drivers should not 'select' subsystems.

> > Also, I think m25p80.c is no longer a "self-contained MTD device driver"
> > and should be moved under drivers/mtd/spi-nor/.
> If we move the m25p80.c to the drivers/mtd/spi-nor/, we also need to move
> other drivers too.

Which ones? I think it only makes sense to move those that depend on the
same core code (i.e., spi-nor.c), or have a close relation to it (so
Lee's st_spi_fsm.c is a candidate).

Brian
Huang Shijie - April 11, 2014, 12:32 a.m.
On Thu, Apr 10, 2014 at 12:29:02PM -0700, Brian Norris wrote:
> > IMHO, we should create a patch or several patches to add the MTD_SPI_NOR
> > to the defconfigs.
> 
> Yeah, I think that's best.
I will create a patch when i back to office.
Or you can create it yourself.

> 
> > > Also, I think m25p80.c is no longer a "self-contained MTD device driver"
> > > and should be moved under drivers/mtd/spi-nor/.
> > If we move the m25p80.c to the drivers/mtd/spi-nor/, we also need to move
> > other drivers too.
> 
> Which ones? I think it only makes sense to move those that depend on the
> same core code (i.e., spi-nor.c), or have a close relation to it (so
> Lee's st_spi_fsm.c is a candidate).

yes, i mean the st_spi_fsm.c and other drivers which will use the
spi-nor core code in the future.

thanks
Huang Shijie
Lee Jones - April 11, 2014, 7:04 a.m.
On Fri, 11 Apr 2014, Huang Shijie wrote:

> On Thu, Apr 10, 2014 at 12:29:02PM -0700, Brian Norris wrote:
> > > IMHO, we should create a patch or several patches to add the MTD_SPI_NOR
> > > to the defconfigs.
> > 
> > Yeah, I think that's best.
> I will create a patch when i back to office.
> Or you can create it yourself.
> 
> > 
> > > > Also, I think m25p80.c is no longer a "self-contained MTD device driver"
> > > > and should be moved under drivers/mtd/spi-nor/.
> > > If we move the m25p80.c to the drivers/mtd/spi-nor/, we also need to move
> > > other drivers too.
> > 
> > Which ones? I think it only makes sense to move those that depend on the
> > same core code (i.e., spi-nor.c), or have a close relation to it (so
> > Lee's st_spi_fsm.c is a candidate).
> 
> yes, i mean the st_spi_fsm.c and other drivers which will use the
> spi-nor core code in the future.

+1 - happy with this.

Patch

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 0128138..004b17b 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -80,7 +80,7 @@  config MTD_DATAFLASH_OTP
 
 config MTD_M25P80
 	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
-	depends on SPI_MASTER
+	depends on SPI_MASTER && MTD_SPI_NOR_BASE
 	help
 	  This enables access to most modern SPI flash chips, used for
 	  program and data storage.   Series supported include Atmel AT26DF,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 882b720..4af6400 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -19,485 +19,98 @@ 
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/math64.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mod_devicetable.h>
 
-#include <linux/mtd/cfi.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/of_platform.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
 
-/* Flash opcodes. */
-#define	OPCODE_WREN		0x06	/* Write enable */
-#define	OPCODE_RDSR		0x05	/* Read status register */
-#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
-#define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
-#define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
-#define	OPCODE_DUAL_READ        0x3b    /* Read data bytes (Dual SPI) */
-#define	OPCODE_QUAD_READ        0x6b    /* Read data bytes (Quad SPI) */
-#define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
-#define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
-#define	OPCODE_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
-#define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
-#define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
-#define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
-#define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
-#define	OPCODE_RDCR             0x35    /* Read configuration register */
-
-/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
-#define	OPCODE_NORM_READ_4B	0x13	/* Read data bytes (low frequency) */
-#define	OPCODE_FAST_READ_4B	0x0c	/* Read data bytes (high frequency) */
-#define	OPCODE_DUAL_READ_4B	0x3c    /* Read data bytes (Dual SPI) */
-#define	OPCODE_QUAD_READ_4B	0x6c    /* Read data bytes (Quad SPI) */
-#define	OPCODE_PP_4B		0x12	/* Page program (up to 256 bytes) */
-#define	OPCODE_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
-
-/* Used for SST flashes only. */
-#define	OPCODE_BP		0x02	/* Byte program */
-#define	OPCODE_WRDI		0x04	/* Write disable */
-#define	OPCODE_AAI_WP		0xad	/* Auto address increment word program */
-
-/* Used for Macronix and Winbond flashes. */
-#define	OPCODE_EN4B		0xb7	/* Enter 4-byte mode */
-#define	OPCODE_EX4B		0xe9	/* Exit 4-byte mode */
-
-/* Used for Spansion flashes only. */
-#define	OPCODE_BRWR		0x17	/* Bank register write */
-
-/* Status Register bits. */
-#define	SR_WIP			1	/* Write in progress */
-#define	SR_WEL			2	/* Write enable latch */
-/* meaning of other SR_* bits may differ between vendors */
-#define	SR_BP0			4	/* Block protect 0 */
-#define	SR_BP1			8	/* Block protect 1 */
-#define	SR_BP2			0x10	/* Block protect 2 */
-#define	SR_SRWD			0x80	/* SR write protect */
-
-#define SR_QUAD_EN_MX           0x40    /* Macronix Quad I/O */
-
-/* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN		0x2     /* Spansion Quad I/O */
-
-/* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
 #define	MAX_CMD_SIZE		6
-
-#define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
-
-/****************************************************************************/
-
-enum read_type {
-	M25P80_NORMAL = 0,
-	M25P80_FAST,
-	M25P80_DUAL,
-	M25P80_QUAD,
-};
-
 struct m25p {
 	struct spi_device	*spi;
-	struct mutex		lock;
+	struct spi_nor		spi_nor;
 	struct mtd_info		mtd;
-	u16			page_size;
-	u16			addr_width;
-	u8			erase_opcode;
-	u8			read_opcode;
-	u8			program_opcode;
-	u8			*command;
-	enum read_type		flash_read;
+	u8			command[MAX_CMD_SIZE];
 };
 
-static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-{
-	return container_of(mtd, struct m25p, mtd);
-}
-
-/****************************************************************************/
-
-/*
- * Internal helper functions
- */
-
-/*
- * Read the status register, returning its value in the location
- * Return the status register value.
- * Returns negative if error occurred.
- */
-static int read_sr(struct m25p *flash)
-{
-	ssize_t retval;
-	u8 code = OPCODE_RDSR;
-	u8 val;
-
-	retval = spi_write_then_read(flash->spi, &code, 1, &val, 1);
-
-	if (retval < 0) {
-		dev_err(&flash->spi->dev, "error %d reading SR\n",
-				(int) retval);
-		return retval;
-	}
-
-	return val;
-}
-
-/*
- * Read configuration register, returning its value in the
- * location. Return the configuration register value.
- * Returns negative if error occured.
- */
-static int read_cr(struct m25p *flash)
-{
-	u8 code = OPCODE_RDCR;
-	int ret;
-	u8 val;
-
-	ret = spi_write_then_read(flash->spi, &code, 1, &val, 1);
-	if (ret < 0) {
-		dev_err(&flash->spi->dev, "error %d reading CR\n", ret);
-		return ret;
-	}
-
-	return val;
-}
-
-/*
- * Write status register 1 byte
- * Returns negative if error occurred.
- */
-static int write_sr(struct m25p *flash, u8 val)
-{
-	flash->command[0] = OPCODE_WRSR;
-	flash->command[1] = val;
-
-	return spi_write(flash->spi, flash->command, 2);
-}
-
-/*
- * Set write enable latch with Write Enable command.
- * Returns negative if error occurred.
- */
-static inline int write_enable(struct m25p *flash)
-{
-	u8	code = OPCODE_WREN;
-
-	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
-}
-
-/*
- * Send write disble instruction to the chip.
- */
-static inline int write_disable(struct m25p *flash)
-{
-	u8	code = OPCODE_WRDI;
-
-	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
-}
-
-/*
- * Enable/disable 4-byte addressing mode.
- */
-static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable)
-{
-	int status;
-	bool need_wren = false;
-
-	switch (JEDEC_MFR(jedec_id)) {
-	case CFI_MFR_ST: /* Micron, actually */
-		/* Some Micron need WREN command; all will accept it */
-		need_wren = true;
-	case CFI_MFR_MACRONIX:
-	case 0xEF /* winbond */:
-		if (need_wren)
-			write_enable(flash);
-
-		flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B;
-		status = spi_write(flash->spi, flash->command, 1);
-
-		if (need_wren)
-			write_disable(flash);
-
-		return status;
-	default:
-		/* Spansion style */
-		flash->command[0] = OPCODE_BRWR;
-		flash->command[1] = enable << 7;
-		return spi_write(flash->spi, flash->command, 2);
-	}
-}
-
-/*
- * Service routine to read status register until ready, or timeout occurs.
- * Returns non-zero if error.
- */
-static int wait_till_ready(struct m25p *flash)
-{
-	unsigned long deadline;
-	int sr;
-
-	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-
-	do {
-		if ((sr = read_sr(flash)) < 0)
-			break;
-		else if (!(sr & SR_WIP))
-			return 0;
-
-		cond_resched();
-
-	} while (!time_after_eq(jiffies, deadline));
-
-	return 1;
-}
-
-/*
- * Write status Register and configuration register with 2 bytes
- * The first byte will be written to the status register, while the
- * second byte will be written to the configuration register.
- * Return negative if error occured.
- */
-static int write_sr_cr(struct m25p *flash, u16 val)
-{
-	flash->command[0] = OPCODE_WRSR;
-	flash->command[1] = val & 0xff;
-	flash->command[2] = (val >> 8);
-
-	return spi_write(flash->spi, flash->command, 3);
-}
-
-static int macronix_quad_enable(struct m25p *flash)
-{
-	int ret, val;
-	u8 cmd[2];
-	cmd[0] = OPCODE_WRSR;
-
-	val = read_sr(flash);
-	cmd[1] = val | SR_QUAD_EN_MX;
-	write_enable(flash);
-
-	spi_write(flash->spi, &cmd, 2);
-
-	if (wait_till_ready(flash))
-		return 1;
-
-	ret = read_sr(flash);
-	if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
-		dev_err(&flash->spi->dev, "Macronix Quad bit not set\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int spansion_quad_enable(struct m25p *flash)
+static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
 {
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
 	int ret;
-	int quad_en = CR_QUAD_EN_SPAN << 8;
-
-	write_enable(flash);
 
-	ret = write_sr_cr(flash, quad_en);
-	if (ret < 0) {
-		dev_err(&flash->spi->dev,
-			"error while writing configuration register\n");
-		return -EINVAL;
-	}
-
-	/* read back and check it */
-	ret = read_cr(flash);
-	if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
-		dev_err(&flash->spi->dev, "Spansion Quad bit not set\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int set_quad_mode(struct m25p *flash, u32 jedec_id)
-{
-	int status;
-
-	switch (JEDEC_MFR(jedec_id)) {
-	case CFI_MFR_MACRONIX:
-		status = macronix_quad_enable(flash);
-		if (status) {
-			dev_err(&flash->spi->dev,
-				"Macronix quad-read not enabled\n");
-			return -EINVAL;
-		}
-		return status;
-	default:
-		status = spansion_quad_enable(flash);
-		if (status) {
-			dev_err(&flash->spi->dev,
-				"Spansion quad-read not enabled\n");
-			return -EINVAL;
-		}
-		return status;
-	}
-}
-
-/*
- * Erase the whole flash memory
- *
- * Returns 0 if successful, non-zero otherwise.
- */
-static int erase_chip(struct m25p *flash)
-{
-	pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__,
-			(long long)(flash->mtd.size >> 10));
+	ret = spi_write_then_read(spi, &code, 1, val, len);
+	if (ret < 0)
+		dev_err(&spi->dev, "error %d reading %x\n", ret, code);
 
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash))
-		return 1;
-
-	/* Send write enable, then erase commands. */
-	write_enable(flash);
-
-	/* Set up command buffer. */
-	flash->command[0] = OPCODE_CHIP_ERASE;
-
-	spi_write(flash->spi, flash->command, 1);
-
-	return 0;
+	return ret;
 }
 
-static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
+static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
 {
 	/* opcode is in cmd[0] */
-	cmd[1] = addr >> (flash->addr_width * 8 -  8);
-	cmd[2] = addr >> (flash->addr_width * 8 - 16);
-	cmd[3] = addr >> (flash->addr_width * 8 - 24);
-	cmd[4] = addr >> (flash->addr_width * 8 - 32);
+	cmd[1] = addr >> (nor->addr_width * 8 -  8);
+	cmd[2] = addr >> (nor->addr_width * 8 - 16);
+	cmd[3] = addr >> (nor->addr_width * 8 - 24);
+	cmd[4] = addr >> (nor->addr_width * 8 - 32);
 }
 
-static int m25p_cmdsz(struct m25p *flash)
+static int m25p_cmdsz(struct spi_nor *nor)
 {
-	return 1 + flash->addr_width;
+	return 1 + nor->addr_width;
 }
 
-/*
- * Erase one sector of flash memory at offset ``offset'' which is any
- * address within the sector which should be erased.
- *
- * Returns 0 if successful, non-zero otherwise.
- */
-static int erase_sector(struct m25p *flash, u32 offset)
+static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
+			int wr_en)
 {
-	pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev),
-			__func__, flash->mtd.erasesize / 1024, offset);
-
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash))
-		return 1;
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
 
-	/* Send write enable, then erase commands. */
-	write_enable(flash);
-
-	/* Set up command buffer. */
-	flash->command[0] = flash->erase_opcode;
-	m25p_addr2cmd(flash, offset, flash->command);
-
-	spi_write(flash->spi, flash->command, m25p_cmdsz(flash));
+	flash->command[0] = opcode;
+	if (buf)
+		memcpy(&flash->command[1], buf, len);
 
-	return 0;
+	return spi_write(spi, flash->command, len + 1);
 }
 
-/****************************************************************************/
-
-/*
- * MTD implementation
- */
-
-/*
- * Erase an address range on the flash chip.  The address range may extend
- * one or more erase sectors.  Return an error is there is a problem erasing.
- */
-static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
+static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	u32 addr,len;
-	uint32_t rem;
-
-	pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev),
-			__func__, (long long)instr->addr,
-			(long long)instr->len);
-
-	div_u64_rem(instr->len, mtd->erasesize, &rem);
-	if (rem)
-		return -EINVAL;
-
-	addr = instr->addr;
-	len = instr->len;
-
-	mutex_lock(&flash->lock);
-
-	/* whole-chip erase? */
-	if (len == flash->mtd.size) {
-		if (erase_chip(flash)) {
-			instr->state = MTD_ERASE_FAILED;
-			mutex_unlock(&flash->lock);
-			return -EIO;
-		}
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
+	struct spi_transfer t[2] = {};
+	struct spi_message m;
+	int cmd_sz = m25p_cmdsz(nor);
 
-	/* REVISIT in some cases we could speed up erasing large regions
-	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
-	 * to use "small sector erase", but that's not always optimal.
-	 */
+	spi_message_init(&m);
 
-	/* "sector"-at-a-time erase */
-	} else {
-		while (len) {
-			if (erase_sector(flash, addr)) {
-				instr->state = MTD_ERASE_FAILED;
-				mutex_unlock(&flash->lock);
-				return -EIO;
-			}
+	if (nor->program_opcode == OPCODE_AAI_WP && nor->sst_write_second)
+		cmd_sz = 1;
 
-			addr += mtd->erasesize;
-			len -= mtd->erasesize;
-		}
-	}
+	flash->command[0] = nor->program_opcode;
+	m25p_addr2cmd(nor, to, flash->command);
 
-	mutex_unlock(&flash->lock);
+	t[0].tx_buf = flash->command;
+	t[0].len = cmd_sz;
+	spi_message_add_tail(&t[0], &m);
 
-	instr->state = MTD_ERASE_DONE;
-	mtd_erase_callback(instr);
+	t[1].tx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
 
-	return 0;
-}
+	spi_sync(spi, &m);
 
-/*
- * Dummy Cycle calculation for different type of read.
- * It can be used to support more commands with
- * different dummy cycle requirements.
- */
-static inline int m25p80_dummy_cycles_read(struct m25p *flash)
-{
-	switch (flash->flash_read) {
-	case M25P80_FAST:
-	case M25P80_DUAL:
-	case M25P80_QUAD:
-		return 1;
-	case M25P80_NORMAL:
-		return 0;
-	default:
-		dev_err(&flash->spi->dev, "No valid read type supported\n");
-		return -1;
-	}
+	*retlen += m.actual_length - cmd_sz;
 }
 
-static inline unsigned int m25p80_rx_nbits(const struct m25p *flash)
+static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
 {
-	switch (flash->flash_read) {
-	case M25P80_DUAL:
+	switch (nor->flash_read) {
+	case SPI_NOR_DUAL:
 		return 2;
-	case M25P80_QUAD:
+	case SPI_NOR_QUAD:
 		return 4;
 	default:
 		return 0;
@@ -505,589 +118,72 @@  static inline unsigned int m25p80_rx_nbits(const struct m25p *flash)
 }
 
 /*
- * Read an address range from the flash chip.  The address range
+ * Read an address range from the nor chip.  The address range
  * may be any size provided it is within the physical boundaries.
  */
-static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-	size_t *retlen, u_char *buf)
+static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2];
 	struct spi_message m;
-	uint8_t opcode;
-	int dummy;
+	int dummy = nor->read_dummy;
+	int ret;
 
-	pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-			__func__, (u32)from, len);
+	/* Wait till previous write/erase is done. */
+	ret = nor->wait_till_ready(nor);
+	if (ret)
+		return ret;
 
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
-	dummy =  m25p80_dummy_cycles_read(flash);
-	if (dummy < 0) {
-		dev_err(&flash->spi->dev, "No valid read command supported\n");
-		return -EINVAL;
-	}
+	flash->command[0] = nor->read_opcode;
+	m25p_addr2cmd(nor, from, flash->command);
 
 	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash) + dummy;
+	t[0].len = m25p_cmdsz(nor) + dummy;
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].rx_buf = buf;
-	t[1].rx_nbits = m25p80_rx_nbits(flash);
+	t[1].rx_nbits = m25p80_rx_nbits(nor);
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	mutex_lock(&flash->lock);
-
-	/* Wait till previous write/erase is done. */
-	if (wait_till_ready(flash)) {
-		/* REVISIT status return?? */
-		mutex_unlock(&flash->lock);
-		return 1;
-	}
-
-	/* Set up the write data buffer. */
-	opcode = flash->read_opcode;
-	flash->command[0] = opcode;
-	m25p_addr2cmd(flash, from, flash->command);
-
-	spi_sync(flash->spi, &m);
-
-	*retlen = m.actual_length - m25p_cmdsz(flash) - dummy;
-
-	mutex_unlock(&flash->lock);
+	spi_sync(spi, &m);
 
+	*retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
 	return 0;
 }
 
-/*
- * Write an address range to the flash chip.  Data must be written in
- * FLASH_PAGESIZE chunks.  The address range may be any size provided
- * it is within the physical boundaries.
- */
-static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
-	size_t *retlen, const u_char *buf)
+static int m25p80_erase(struct spi_nor *nor, loff_t offset)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	u32 page_offset, page_size;
-	struct spi_transfer t[2];
-	struct spi_message m;
-
-	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-			__func__, (u32)to, len);
-
-	spi_message_init(&m);
-	memset(t, 0, (sizeof t));
-
-	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash);
-	spi_message_add_tail(&t[0], &m);
-
-	t[1].tx_buf = buf;
-	spi_message_add_tail(&t[1], &m);
-
-	mutex_lock(&flash->lock);
-
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash)) {
-		mutex_unlock(&flash->lock);
-		return 1;
-	}
-
-	write_enable(flash);
-
-	/* Set up the opcode in the write buffer. */
-	flash->command[0] = flash->program_opcode;
-	m25p_addr2cmd(flash, to, flash->command);
-
-	page_offset = to & (flash->page_size - 1);
-
-	/* do all the bytes fit onto one page? */
-	if (page_offset + len <= flash->page_size) {
-		t[1].len = len;
-
-		spi_sync(flash->spi, &m);
-
-		*retlen = m.actual_length - m25p_cmdsz(flash);
-	} else {
-		u32 i;
-
-		/* the size of data remaining on the first page */
-		page_size = flash->page_size - page_offset;
-
-		t[1].len = page_size;
-		spi_sync(flash->spi, &m);
-
-		*retlen = m.actual_length - m25p_cmdsz(flash);
-
-		/* write everything in flash->page_size chunks */
-		for (i = page_size; i < len; i += page_size) {
-			page_size = len - i;
-			if (page_size > flash->page_size)
-				page_size = flash->page_size;
-
-			/* write the next page to flash */
-			m25p_addr2cmd(flash, to + i, flash->command);
-
-			t[1].tx_buf = buf + i;
-			t[1].len = page_size;
-
-			wait_till_ready(flash);
-
-			write_enable(flash);
-
-			spi_sync(flash->spi, &m);
-
-			*retlen += m.actual_length - m25p_cmdsz(flash);
-		}
-	}
-
-	mutex_unlock(&flash->lock);
-
-	return 0;
-}
-
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct m25p *flash = mtd_to_m25p(mtd);
-	struct spi_transfer t[2];
-	struct spi_message m;
-	size_t actual;
-	int cmd_sz, ret;
-
-	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-			__func__, (u32)to, len);
-
-	spi_message_init(&m);
-	memset(t, 0, (sizeof t));
-
-	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash);
-	spi_message_add_tail(&t[0], &m);
-
-	t[1].tx_buf = buf;
-	spi_message_add_tail(&t[1], &m);
+	struct m25p *flash = nor->priv;
+	int ret;
 
-	mutex_lock(&flash->lock);
+	dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
+		flash->mtd.erasesize / 1024, (u32)offset);
 
 	/* Wait until finished previous write command. */
-	ret = wait_till_ready(flash);
+	ret = nor->wait_till_ready(nor);
 	if (ret)
-		goto time_out;
-
-	write_enable(flash);
-
-	actual = to % 2;
-	/* Start write from odd address. */
-	if (actual) {
-		flash->command[0] = OPCODE_BP;
-		m25p_addr2cmd(flash, to, flash->command);
-
-		/* write one byte. */
-		t[1].len = 1;
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - m25p_cmdsz(flash);
-	}
-	to += actual;
-
-	flash->command[0] = OPCODE_AAI_WP;
-	m25p_addr2cmd(flash, to, flash->command);
-
-	/* Write out most of the data here. */
-	cmd_sz = m25p_cmdsz(flash);
-	for (; actual < len - 1; actual += 2) {
-		t[0].len = cmd_sz;
-		/* write two bytes. */
-		t[1].len = 2;
-		t[1].tx_buf = buf + actual;
+		return ret;
 
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - cmd_sz;
-		cmd_sz = 1;
-		to += 2;
-	}
-	write_disable(flash);
-	ret = wait_till_ready(flash);
+	/* Send write enable, then erase commands. */
+	ret = nor->write_reg(nor, OPCODE_WREN, NULL, 0, 0);
 	if (ret)
-		goto time_out;
-
-	/* Write out trailing byte if it exists. */
-	if (actual != len) {
-		write_enable(flash);
-		flash->command[0] = OPCODE_BP;
-		m25p_addr2cmd(flash, to, flash->command);
-		t[0].len = m25p_cmdsz(flash);
-		t[1].len = 1;
-		t[1].tx_buf = buf + actual;
-
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - m25p_cmdsz(flash);
-		write_disable(flash);
-	}
-
-time_out:
-	mutex_unlock(&flash->lock);
-	return ret;
-}
-
-static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct m25p *flash = mtd_to_m25p(mtd);
-	uint32_t offset = ofs;
-	uint8_t status_old, status_new;
-	int res = 0;
-
-	mutex_lock(&flash->lock);
-	/* Wait until finished previous command */
-	if (wait_till_ready(flash)) {
-		res = 1;
-		goto err;
-	}
-
-	status_old = read_sr(flash);
-
-	if (offset < flash->mtd.size-(flash->mtd.size/2))
-		status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
-	else if (offset < flash->mtd.size-(flash->mtd.size/4))
-		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
-	else if (offset < flash->mtd.size-(flash->mtd.size/8))
-		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
-	else if (offset < flash->mtd.size-(flash->mtd.size/16))
-		status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
-	else if (offset < flash->mtd.size-(flash->mtd.size/32))
-		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
-	else if (offset < flash->mtd.size-(flash->mtd.size/64))
-		status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
-	else
-		status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;
-
-	/* Only modify protection if it will not unlock other areas */
-	if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) >
-					(status_old&(SR_BP2|SR_BP1|SR_BP0))) {
-		write_enable(flash);
-		if (write_sr(flash, status_new) < 0) {
-			res = 1;
-			goto err;
-		}
-	}
-
-err:	mutex_unlock(&flash->lock);
-	return res;
-}
-
-static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct m25p *flash = mtd_to_m25p(mtd);
-	uint32_t offset = ofs;
-	uint8_t status_old, status_new;
-	int res = 0;
-
-	mutex_lock(&flash->lock);
-	/* Wait until finished previous command */
-	if (wait_till_ready(flash)) {
-		res = 1;
-		goto err;
-	}
-
-	status_old = read_sr(flash);
-
-	if (offset+len > flash->mtd.size-(flash->mtd.size/64))
-		status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0);
-	else if (offset+len > flash->mtd.size-(flash->mtd.size/32))
-		status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;
-	else if (offset+len > flash->mtd.size-(flash->mtd.size/16))
-		status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
-	else if (offset+len > flash->mtd.size-(flash->mtd.size/8))
-		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
-	else if (offset+len > flash->mtd.size-(flash->mtd.size/4))
-		status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
-	else if (offset+len > flash->mtd.size-(flash->mtd.size/2))
-		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
-	else
-		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
-
-	/* Only modify protection if it will not lock other areas */
-	if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) <
-					(status_old&(SR_BP2|SR_BP1|SR_BP0))) {
-		write_enable(flash);
-		if (write_sr(flash, status_new) < 0) {
-			res = 1;
-			goto err;
-		}
-	}
-
-err:	mutex_unlock(&flash->lock);
-	return res;
-}
-
-/****************************************************************************/
-
-/*
- * SPI device driver setup and teardown
- */
-
-struct flash_info {
-	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
-	 * a high byte of zero plus three data bytes: the manufacturer id,
-	 * then a two byte device id.
-	 */
-	u32		jedec_id;
-	u16             ext_id;
-
-	/* The size listed here is what works with OPCODE_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
-
-	u16		flags;
-#define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
-#define	M25P_NO_ERASE	0x02		/* No erase command needed */
-#define	SST_WRITE	0x04		/* use SST byte programming */
-#define	M25P_NO_FR	0x08		/* Can't do fastread */
-#define	SECT_4K_PMC	0x10		/* OPCODE_BE_4K_PMC works uniformly */
-#define	M25P80_DUAL_READ	0x20    /* Flash supports Dual Read */
-#define	M25P80_QUAD_READ	0x40    /* Flash supports Quad Read */
-};
-
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
-		.jedec_id = (_jedec_id),				\
-		.ext_id = (_ext_id),					\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.flags = (_flags),					\
-	})
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
-		.flags = (_flags),					\
-	})
-
-/* NOTE: double check command sets and memory organization when you add
- * more flash chips.  This current list focusses on newer chips, which
- * have been converging on command sets which including JEDEC ID.
- */
-static const struct spi_device_id m25p_ids[] = {
-	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
-
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
-
-	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
-
-	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
-
-	/* EON -- en25xxx */
-	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
-	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
-	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
-	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
-	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
-
-	/* ESMT */
-	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
-
-	/* Everspin */
-	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
-
-	/* GigaDevice */
-	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-
-	/* Intel/Numonyx -- xxxs33b */
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
-
-	/* Macronix */
-	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
-	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
-	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, M25P80_QUAD_READ) },
-
-	/* Micron */
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
-	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
-
-	/* PMC */
-	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
-	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
-
-	/* Spansion -- single (large) sector size only, at least
-	 * for the chips listed here (without boot sectors).
-	 */
-	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, 0) },
-	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, 0) },
-	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
-	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, M25P80_DUAL_READ | M25P80_QUAD_READ) },
-	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_DUAL_READ | M25P80_QUAD_READ) },
-	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
-	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
-	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
-	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
-	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
-	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
-	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
-	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
-	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K) },
-	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K) },
-	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
-
-	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-
-	/* ST Microelectronics -- newer production may have feature updates */
-	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
-	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
-	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
-	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
-	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
-	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
-	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
-	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
-	{ "n25q032", INFO(0x20ba16,  0,  64 * 1024,  64, 0) },
-
-	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
-	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
-	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
-	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
-	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
-	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
-	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
-	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
-	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
-
-	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
-	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
-	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
-
-	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
-	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
-	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
-
-	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
-	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
-
-	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
-	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
-	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
-
-	/* Catalyst / On Semiconductor -- non-JEDEC */
-	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE | M25P_NO_FR) },
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, m25p_ids);
-
-static const struct spi_device_id *jedec_probe(struct spi_device *spi)
-{
-	int			tmp;
-	u8			code = OPCODE_RDID;
-	u8			id[5];
-	u32			jedec;
-	u16                     ext_jedec;
-	struct flash_info	*info;
+		return ret;
 
-	/* JEDEC also defines an optional "extended device information"
-	 * string for after vendor-specific data, after the three bytes
-	 * we use here.  Supporting some chips might require using it.
-	 */
-	tmp = spi_write_then_read(spi, &code, 1, id, 5);
-	if (tmp < 0) {
-		pr_debug("%s: error %d reading JEDEC ID\n",
-				dev_name(&spi->dev), tmp);
-		return ERR_PTR(tmp);
-	}
-	jedec = id[0];
-	jedec = jedec << 8;
-	jedec |= id[1];
-	jedec = jedec << 8;
-	jedec |= id[2];
+	/* Set up command buffer. */
+	flash->command[0] = nor->erase_opcode;
+	m25p_addr2cmd(nor, offset, flash->command);
 
-	ext_jedec = id[3] << 8 | id[4];
+	spi_write(flash->spi, flash->command, m25p_cmdsz(nor));
 
-	for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
-		info = (void *)m25p_ids[tmp].driver_data;
-		if (info->jedec_id == jedec) {
-			if (info->ext_id == 0 || info->ext_id == ext_jedec)
-				return &m25p_ids[tmp];
-		}
-	}
-	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
-	return ERR_PTR(-ENODEV);
+	return 0;
 }
 
-
 /*
  * board specific setup should have ensured the SPI clock used here
  * matches what the READ command supports, at least until this driver
@@ -1095,231 +191,43 @@  static const struct spi_device_id *jedec_probe(struct spi_device *spi)
  */
 static int m25p_probe(struct spi_device *spi)
 {
-	const struct spi_device_id	*id = spi_get_device_id(spi);
-	struct flash_platform_data	*data;
-	struct m25p			*flash;
-	struct flash_info		*info;
-	unsigned			i;
 	struct mtd_part_parser_data	ppdata;
-	struct device_node *np = spi->dev.of_node;
+	struct flash_platform_data	*data;
+	struct m25p *flash;
+	struct spi_nor *nor;
+	enum read_mode mode = SPI_NOR_NORMAL;
 	int ret;
 
-	/* Platform data helps sort out which chip type we have, as
-	 * well as how this board partitions it.  If we don't have
-	 * a chip ID, try the JEDEC id commands; they'll work for most
-	 * newer chips, even if we don't recognize the particular chip.
-	 */
-	data = dev_get_platdata(&spi->dev);
-	if (data && data->type) {
-		const struct spi_device_id *plat_id;
-
-		for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) {
-			plat_id = &m25p_ids[i];
-			if (strcmp(data->type, plat_id->name))
-				continue;
-			break;
-		}
-
-		if (i < ARRAY_SIZE(m25p_ids) - 1)
-			id = plat_id;
-		else
-			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
-	}
-
-	info = (void *)id->driver_data;
-
-	if (info->jedec_id) {
-		const struct spi_device_id *jid;
-
-		jid = jedec_probe(spi);
-		if (IS_ERR(jid)) {
-			return PTR_ERR(jid);
-		} else if (jid != id) {
-			/*
-			 * JEDEC knows better, so overwrite platform ID. We
-			 * can't trust partitions any longer, but we'll let
-			 * mtd apply them anyway, since some partitions may be
-			 * marked read-only, and we don't want to lose that
-			 * information, even if it's not 100% accurate.
-			 */
-			dev_warn(&spi->dev, "found %s, expected %s\n",
-				 jid->name, id->name);
-			id = jid;
-			info = (void *)jid->driver_data;
-		}
-	}
-
 	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
 
-	flash->command = devm_kzalloc(&spi->dev, MAX_CMD_SIZE, GFP_KERNEL);
-	if (!flash->command)
-		return -ENOMEM;
-
-	flash->spi = spi;
-	mutex_init(&flash->lock);
-	spi_set_drvdata(spi, flash);
-
-	/*
-	 * Atmel, SST and Intel/Numonyx serial flash tend to power
-	 * up with the software protection bits set
-	 */
+	nor = &flash->spi_nor;
 
-	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
-	    JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
-	    JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
-		write_enable(flash);
-		write_sr(flash, 0);
-	}
-
-	if (data && data->name)
-		flash->mtd.name = data->name;
-	else
-		flash->mtd.name = dev_name(&spi->dev);
-
-	flash->mtd.type = MTD_NORFLASH;
-	flash->mtd.writesize = 1;
-	flash->mtd.flags = MTD_CAP_NORFLASH;
-	flash->mtd.size = info->sector_size * info->n_sectors;
-	flash->mtd._erase = m25p80_erase;
-	flash->mtd._read = m25p80_read;
-
-	/* flash protection support for STmicro chips */
-	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
-		flash->mtd._lock = m25p80_lock;
-		flash->mtd._unlock = m25p80_unlock;
-	}
+	/* install the hooks */
+	nor->read = m25p80_read;
+	nor->write = m25p80_write;
+	nor->erase = m25p80_erase;
+	nor->write_reg = m25p80_write_reg;
+	nor->read_reg = m25p80_read_reg;
 
-	/* sst flash chips use AAI word program */
-	if (info->flags & SST_WRITE)
-		flash->mtd._write = sst_write;
-	else
-		flash->mtd._write = m25p80_write;
+	nor->dev = &spi->dev;
+	nor->mtd = &flash->mtd;
+	nor->priv = flash;
 
-	/* prefer "small sector" erase if possible */
-	if (info->flags & SECT_4K) {
-		flash->erase_opcode = OPCODE_BE_4K;
-		flash->mtd.erasesize = 4096;
-	} else if (info->flags & SECT_4K_PMC) {
-		flash->erase_opcode = OPCODE_BE_4K_PMC;
-		flash->mtd.erasesize = 4096;
-	} else {
-		flash->erase_opcode = OPCODE_SE;
-		flash->mtd.erasesize = info->sector_size;
-	}
+	spi_set_drvdata(spi, flash);
+	flash->mtd.priv = nor;
+	flash->spi = spi;
 
-	if (info->flags & M25P_NO_ERASE)
-		flash->mtd.flags |= MTD_NO_ERASE;
+	if (spi->mode & SPI_RX_QUAD)
+		mode = SPI_NOR_QUAD;
+	ret = spi_nor_scan(nor, spi_get_device_id(spi), mode);
+	if (ret)
+		return ret;
 
+	data = dev_get_platdata(&spi->dev);
 	ppdata.of_node = spi->dev.of_node;
-	flash->mtd.dev.parent = &spi->dev;
-	flash->page_size = info->page_size;
-	flash->mtd.writebufsize = flash->page_size;
-
-	if (np) {
-		/* If we were instantiated by DT, use it */
-		if (of_property_read_bool(np, "m25p,fast-read"))
-			flash->flash_read = M25P80_FAST;
-		else
-			flash->flash_read = M25P80_NORMAL;
-	} else {
-		/* If we weren't instantiated by DT, default to fast-read */
-		flash->flash_read = M25P80_FAST;
-	}
-
-	/* Some devices cannot do fast-read, no matter what DT tells us */
-	if (info->flags & M25P_NO_FR)
-		flash->flash_read = M25P80_NORMAL;
-
-	/* Quad/Dual-read mode takes precedence over fast/normal */
-	if (spi->mode & SPI_RX_QUAD && info->flags & M25P80_QUAD_READ) {
-		ret = set_quad_mode(flash, info->jedec_id);
-		if (ret) {
-			dev_err(&flash->spi->dev, "quad mode not supported\n");
-			return ret;
-		}
-		flash->flash_read = M25P80_QUAD;
-	} else if (spi->mode & SPI_RX_DUAL && info->flags & M25P80_DUAL_READ) {
-		flash->flash_read = M25P80_DUAL;
-	}
 
-	/* Default commands */
-	switch (flash->flash_read) {
-	case M25P80_QUAD:
-		flash->read_opcode = OPCODE_QUAD_READ;
-		break;
-	case M25P80_DUAL:
-		flash->read_opcode = OPCODE_DUAL_READ;
-		break;
-	case M25P80_FAST:
-		flash->read_opcode = OPCODE_FAST_READ;
-		break;
-	case M25P80_NORMAL:
-		flash->read_opcode = OPCODE_NORM_READ;
-		break;
-	default:
-		dev_err(&flash->spi->dev, "No Read opcode defined\n");
-		return -EINVAL;
-	}
-
-	flash->program_opcode = OPCODE_PP;
-
-	if (info->addr_width)
-		flash->addr_width = info->addr_width;
-	else if (flash->mtd.size > 0x1000000) {
-		/* enable 4-byte addressing if the device exceeds 16MiB */
-		flash->addr_width = 4;
-		if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
-			/* Dedicated 4-byte command set */
-			switch (flash->flash_read) {
-			case M25P80_QUAD:
-				flash->read_opcode = OPCODE_QUAD_READ_4B;
-				break;
-			case M25P80_DUAL:
-				flash->read_opcode = OPCODE_DUAL_READ_4B;
-				break;
-			case M25P80_FAST:
-				flash->read_opcode = OPCODE_FAST_READ_4B;
-				break;
-			case M25P80_NORMAL:
-				flash->read_opcode = OPCODE_NORM_READ_4B;
-				break;
-			}
-			flash->program_opcode = OPCODE_PP_4B;
-			/* No small sector erase for 4-byte command set */
-			flash->erase_opcode = OPCODE_SE_4B;
-			flash->mtd.erasesize = info->sector_size;
-		} else
-			set_4byte(flash, info->jedec_id, 1);
-	} else {
-		flash->addr_width = 3;
-	}
-
-	dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
-			(long long)flash->mtd.size >> 10);
-
-	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
-			".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
-		flash->mtd.name,
-		(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
-		flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-		flash->mtd.numeraseregions);
-
-	if (flash->mtd.numeraseregions)
-		for (i = 0; i < flash->mtd.numeraseregions; i++)
-			pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, "
-				".erasesize = 0x%.8x (%uKiB), "
-				".numblocks = %d }\n",
-				i, (long long)flash->mtd.eraseregions[i].offset,
-				flash->mtd.eraseregions[i].erasesize,
-				flash->mtd.eraseregions[i].erasesize / 1024,
-				flash->mtd.eraseregions[i].numblocks);
-
-
-	/* partitions should match sector boundaries; and it may be good to
-	 * use readonly partitions for writeprotected sectors (BP2..BP0).
-	 */
 	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
 			data ? data->parts : NULL,
 			data ? data->nr_parts : 0);
@@ -1340,7 +248,7 @@  static struct spi_driver m25p80_driver = {
 		.name	= "m25p80",
 		.owner	= THIS_MODULE,
 	},
-	.id_table	= m25p_ids,
+	.id_table	= spi_nor_ids,
 	.probe	= m25p_probe,
 	.remove	= m25p_remove,