deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,11 +7,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,11 +7,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
deleted file mode 100644
@@ -1,15 +0,0 @@
-#
-# Copyright (c) Switchfin Org. <dpn@switchfin.org>
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -7,11 +7,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
@@ -7,11 +7,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
deleted file mode 100644
@@ -1,15 +0,0 @@
-#
-# Copyright (c) Switchfin Org. <dpn@switchfin.org>
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
@@ -7,10 +7,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# FIX ME
-ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),)
-ccflags-y := -O2
-endif
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
@@ -136,7 +136,7 @@
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_HUSH_PARSER
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -155,7 +155,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -153,6 +153,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
@@ -136,7 +136,7 @@
*/
#define CONFIG_MISC_INIT_R
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -179,7 +179,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -112,7 +112,7 @@
*/
#define CONFIG_MISC_INIT_R
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -110,7 +110,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -185,6 +185,7 @@
*/
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/* FLASH/ETHERNET uses the same async bank */
#define SHARED_RESOURCES 1
@@ -254,6 +254,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/* Define if want to do post memory test */
#undef CONFIG_POST
@@ -134,7 +134,7 @@
*/
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -181,6 +181,7 @@
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
#define CONFIG_ADI_GPIO2
@@ -160,7 +160,7 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BAUDRATE 57600
#define CONFIG_SYS_PROMPT "Acvilon> "
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -102,6 +102,7 @@
* Misc Settings
*/
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Run core 1 from L1 SRAM start address when init uboot on core 0
@@ -135,7 +135,7 @@
#define CONFIG_BOOTCOMMAND "run nandboot"
#define CONFIG_BOOTDELAY 2
#define CONFIG_LOADADDR 0x2000000
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -128,7 +128,7 @@
#define FLASHBOOT_ENV_SETTINGS \
"flashboot=flread 20040000 1000000 300000;" \
"bootm 0x1000000\0"
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -97,7 +97,7 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -146,6 +146,7 @@
"flashboot=flread 20040000 1000000 3c0000;" \
"bootm 0x1000000\0"
#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -143,7 +143,7 @@
"flashboot=flread 20040000 1000000 300000;" \
"bootm 0x1000000\0"
#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -117,6 +117,7 @@
#define CONFIG_UART_CONSOLE 1
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
#define CONFIG_ADI_GPIO2
@@ -99,7 +99,7 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -132,6 +132,7 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_MISC_INIT_R /* needed for MAC address */
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
#undef CONFIG_SHOW_BOOT_PROGRESS
/* Enable this if bootretry required; currently it's disabled */
@@ -135,7 +135,7 @@
#define CONFIG_BOOTCOMMAND "run nandboot"
#define CONFIG_BOOTDELAY 2
#define CONFIG_LOADADDR 0x2000000
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -116,7 +116,7 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -145,7 +145,7 @@
"flashboot=flread 20040000 1000000 300000;" \
"bootm 0x1000000\0"
#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
/*
* Pull in common ADI header for remaining command/environment setup
@@ -65,3 +65,5 @@ obj-y += vsprintf.o
obj-$(CONFIG_RANDOM_MACADDR) += rand.o
obj-$(CONFIG_BOOTP_RANDOM_DELAY) += rand.o
obj-$(CONFIG_CMD_LINK_LOCAL) += rand.o
+
+subdir-ccflags-$(CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED) += -O2
Many (but not all) of Blackfin boards give -O2 option to compile under lib/ directory. That means lib/ should be speed-optimized, whereas other parts should be size-optimized. We want to keep the same behavior, but do not want to parse board/*/config.mk again and again. We've got no choice but to invent a new method. CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED, if it is enabled, gives -O2 flag only for building under lib/ directory. Dirty code which I had marked "FIX ME" in board/${BOARD}/config.mk has been deleted. Instead, CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED has been defined in include/configs/${BOARD}.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> --- board/bct-brettl2/config.mk | 13 ------------- board/bf518f-ezbrd/config.mk | 13 ------------- board/bf526-ezbrd/config.mk | 13 ------------- board/bf527-ad7160-eval/config.mk | 13 ------------- board/bf527-ezkit/config.mk | 13 ------------- board/bf527-sdp/config.mk | 5 ----- board/bf533-ezkit/config.mk | 5 ----- board/bf533-stamp/config.mk | 5 ----- board/bf537-stamp/config.mk | 5 ----- board/bf538f-ezkit/config.mk | 5 ----- board/bf548-ezkit/config.mk | 5 ----- board/bf561-acvilon/config.mk | 5 ----- board/bf561-ezkit/config.mk | 5 ----- board/br4/config.mk | 15 --------------- board/cm-bf527/config.mk | 13 ------------- board/cm-bf533/config.mk | 5 ----- board/cm-bf537e/config.mk | 5 ----- board/cm-bf537u/config.mk | 5 ----- board/cm-bf548/config.mk | 5 ----- board/cm-bf561/config.mk | 5 ----- board/ip04/config.mk | 5 ----- board/pr1/config.mk | 15 --------------- board/tcm-bf518/config.mk | 13 ------------- board/tcm-bf537/config.mk | 5 ----- include/configs/bct-brettl2.h | 2 +- include/configs/bf518f-ezbrd.h | 2 +- include/configs/bf526-ezbrd.h | 1 + include/configs/bf527-ad7160-eval.h | 2 +- include/configs/bf527-ezkit.h | 2 +- include/configs/bf527-sdp.h | 2 +- include/configs/bf533-ezkit.h | 2 +- include/configs/bf533-stamp.h | 1 + include/configs/bf537-stamp.h | 1 + include/configs/bf538f-ezkit.h | 2 +- include/configs/bf548-ezkit.h | 1 + include/configs/bf561-acvilon.h | 2 +- include/configs/bf561-ezkit.h | 1 + include/configs/br4.h | 2 +- include/configs/cm-bf527.h | 2 +- include/configs/cm-bf533.h | 2 +- include/configs/cm-bf537e.h | 1 + include/configs/cm-bf537u.h | 2 +- include/configs/cm-bf548.h | 1 + include/configs/cm-bf561.h | 2 +- include/configs/ip04.h | 1 + include/configs/pr1.h | 2 +- include/configs/tcm-bf518.h | 2 +- include/configs/tcm-bf537.h | 2 +- lib/Makefile | 2 ++ 49 files changed, 26 insertions(+), 212 deletions(-) delete mode 100644 board/bct-brettl2/config.mk delete mode 100644 board/bf518f-ezbrd/config.mk delete mode 100644 board/bf526-ezbrd/config.mk delete mode 100644 board/bf527-ad7160-eval/config.mk delete mode 100644 board/bf527-ezkit/config.mk delete mode 100644 board/br4/config.mk delete mode 100644 board/cm-bf527/config.mk delete mode 100644 board/pr1/config.mk delete mode 100644 board/tcm-bf518/config.mk