diff mbox

[v2] configs: add SoCkit defconfig

Message ID 1393005432-14285-1-git-send-email-sebastien.bourdelin@savoirfairelinux.com
State Superseded
Headers show

Commit Message

Sebastien Bourdelin Feb. 21, 2014, 5:57 p.m. UTC 
This commit introduces the minimal support for the SoCkit from altera :
http://www.altera.com/b/arrow-sockit.html

It is based on the "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
work at https://github.com/rndi/buildroot-alt.

The kernel and the u-boot used is the one developped by rocketboards.org
as it is not supported currently in mainline kernel.

For more info, please find board/altera/sockit/readme.txt
---
Changes v1 -> v2:
  - Fixe typo in the path to the post-image.sh script
  - Remove useless line in the post-image.sh script
---
 board/altera/sockit/post-image.sh                  |   7 +
 board/altera/sockit/readme.txt                     | 170 +++++
 .../uboot-sockit-preloader-sample-design.patch     | 820 +++++++++++++++++++++
 configs/altera_sockit_defconfig                    |  32 +
 4 files changed, 1029 insertions(+)
 create mode 100755 board/altera/sockit/post-image.sh
 create mode 100644 board/altera/sockit/readme.txt
 create mode 100644 board/altera/sockit/uboot-sockit-preloader-sample-design.patch
 create mode 100644 configs/altera_sockit_defconfig

Comments

Charles Manning Feb. 24, 2014, 2:26 a.m. UTC | #1 
Hello Sebasitian

> +Copy the rootfs :
> +
> +  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k

It is advisable to do:

sudo sync 

at this stage. Some hosts do async writing to block devices and popping the SD 
card after a write (particularly a large one) can end up losing data.


> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5"

> +BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"

IMHO, this way of doing sockit board support is ugly because it stomps over 
socfpga_cyclone5 breaks builds for that board . I know that this is the way 
most people are doing it, but still...


It is probably better if this is handled with proper boards.

There is some work that Walter Lozano and I are doing which helps move this 
along. There is some discussion on the rocketboard RFI ML.

I am going to try to get a github repository of u-boot up that builds this as 
socfpga_cyclone5 and then get the rocketboard people to merge it.

Regards

Charles
Sebastien Bourdelin Feb. 25, 2014, 4:05 p.m. UTC | #2 
Hello Charles,

On 02/23/2014 09:26 PM, Charles Manning wrote:
> Hello Sebasitian
>
>> +Copy the rootfs :
>> +
>> +  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
> It is advisable to do:
>
> sudo sync 
>
> at this stage. Some hosts do async writing to block devices and popping the SD 
> card after a write (particularly a large one) can end up losing data.
>

Thanks for this advice, i will add this in the readme.

>> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5"
>> +BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
> IMHO, this way of doing sockit board support is ugly because it stomps over 
> socfpga_cyclone5 breaks builds for that board . I know that this is the way 
> most people are doing it, but still...
>
>
> It is probably better if this is handled with proper boards.
>
> There is some work that Walter Lozano and I are doing which helps move this 
> along. There is some discussion on the rocketboard RFI ML.
>
> I am going to try to get a github repository of u-boot up that builds this as 
> socfpga_cyclone5 and then get the rocketboard people to merge it.
>
> Regards
>
> Charles

Well i agree, but until there is a "sockit" config i think this is the
way to go.
By the way, i have seen rocketboard tagged a new Linux and uboot release
last week, this Linux release has a socfpga_cyclone5_sockit.dts and
seems to work, so i will change the buildroot config to use this release.
For the new uboot release, i can't make the preloader work... the files
generated by the Altera's tools in its 13.1 version doesn't work from
scratch, i'm stuck in the sdram calibration and i'm not enough confident
to make it work, so until someone know what's wrong i will stay on the
previous uboot release based on the 13.0sp1 Altera's tools.

Regards,

Sebastien.
Charles Manning Feb. 26, 2014, 3:51 a.m. UTC | #3 
On Wednesday 26 February 2014 05:05:53 Sebastien Bourdelin wrote:
> Hello Charles,
>
> On 02/23/2014 09:26 PM, Charles Manning wrote:
> > Hello Sebasitian
> >
> >> +Copy the rootfs :
> >> +
> >> +  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
> >
> > It is advisable to do:
> >
> > sudo sync
> >
> > at this stage. Some hosts do async writing to block devices and popping
> > the SD card after a write (particularly a large one) can end up losing
> > data.
>
> Thanks for this advice, i will add this in the readme.
>
> >> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5"
> >> +BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
> >
> > IMHO, this way of doing sockit board support is ugly because it stomps
> > over socfpga_cyclone5 breaks builds for that board . I know that this is
> > the way most people are doing it, but still...
> >
> >
> > It is probably better if this is handled with proper boards.
> >
> > There is some work that Walter Lozano and I are doing which helps move
> > this along. There is some discussion on the rocketboard RFI ML.
> >
> > I am going to try to get a github repository of u-boot up that builds
> > this as socfpga_cyclone5 and then get the rocketboard people to merge it.
> >
> > Regards
> >
> > Charles
>
> Well i agree, but until there is a "sockit" config i think this is the
> way to go.
> By the way, i have seen rocketboard tagged a new Linux and uboot release
> last week, this Linux release has a socfpga_cyclone5_sockit.dts and
> seems to work, so i will change the buildroot config to use this release.

Great I must look into that.

> For the new uboot release, i can't make the preloader work... the files
> generated by the Altera's tools in its 13.1 version doesn't work from
> scratch, i'm stuck in the sdram calibration and i'm not enough confident
> to make it work, so until someone know what's wrong i will stay on the
> previous uboot release based on the 13.0sp1 Altera's tools.

That is exactly the same problem as I, and others, are having: SDRAM 
calibration fails and it is the end of the party.

I have a git repo that builds Sockit, but is based off some old stuff. I am 
trying to get that published with a proper sockit config etc.

Regards

Charles
diff mbox

Patch

diff --git a/board/altera/sockit/post-image.sh b/board/altera/sockit/post-image.sh
new file mode 100755
index 0000000..676960d
--- /dev/null
+++ b/board/altera/sockit/post-image.sh
@@ -0,0 +1,7 @@ 
+#!/bin/sh
+# post-image.sh for SoCkit
+# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
+# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
+
+# create a DTB file copy with the name expected by the u-boot config
+cp -af $BINARIES_DIR/socfpga_cyclone5.dtb  $BINARIES_DIR/socfpga.dtb
diff --git a/board/altera/sockit/readme.txt b/board/altera/sockit/readme.txt
new file mode 100644
index 0000000..95d3ee5
--- /dev/null
+++ b/board/altera/sockit/readme.txt
@@ -0,0 +1,170 @@ 
+SoCkit
+
+Intro
+=====
+
+This is the buildroot board support for the Arrow SoCkit Evaluation Board.
+
+A good source of information is :
+http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
+
+
+How it works
+============
+
+Boot process :
+--------------
+
+In summary, the bootloader has multiple stages, an hardcoded boot routine is
+loaded from an on-chip ROM.
+
+  - That first stage is scanning the SD card's partition table to find
+    partition having the 0xA2 type.
+  - This partition is expected to contain a boot image on its first 60 Kb,
+    because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
+    which will load the u-boot image.
+  - Then the u-boot image will load the Linux kernel.
+
+A good source of information for the boot process is :
+http://xillybus.com/tutorials/u-boot-image-altera-soc
+
+Note for the SPL :
+The SPL generated by the u-boot from Rocketboards doesn't seems to work,
+therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
+based on the files generated with the Altera example design.
+
+For more information about this files please look at :
+http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
+
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The arrow_sockit_defconfig configuration is a minimal configuration with
+all that is required to bring the SoCkit :
+
+  $ make arrow_sockit_defconfig
+
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── socfpga_cyclone5.dtb
+    ├── socfpga.dtb
+    ├── u-boot.img
+    ├── u-boot-spl.bin
+    └── uImage
+
+
+Signing the Preloader
+---------------------
+
+*** BEWARE ****
+The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
+This tool comes as a part of the Altera development environnment (SoC EDS).
+A fork of this tool have been done by Maxime Hadjinlian and can be found here :
+https://github.com/maximeh/mkpimage
+
+Remember that without signing the u-boot-spl.bin, the board will not boot !!!
+
+  $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
+
+
+
+Prepare your SDcard
+===================
+
+A good source of information for the partitioning process is :
+http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
+
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card :
+
+  $ cat /proc/partitions
+
+let's assume it is /dev/mmcblk0 :
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions with 'd' then create the new partition table,
+using these options, pressing enter after each one:
+
+  * n p 1 9000000 +20480K t 1 b
+  * n p 2 4096 +4496384K t 83
+  * n p 3 2048 +1024K t 3 a2
+
+Using the 'p' option, the SD card's partition must look like this :
+
+Device         Boot     Start       End  Blocks  Id System
+/dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
+/dev/mmcblk0p2           4096   8996863 4496384  83 Linux
+/dev/mmcblk0p3           2048      4095    1024  a2 Unknown
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition :
+
+  $ sudo mkdosfs /dev/mmcblk0p1
+
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory :
+
+  $ cd output/images
+
+The partition with type a2 is the partition scan by the first bootloader stage
+in the SoCkit ROM to find the next bootloader stage so we must write the signed
+preloader and the u-boot binaries in that partition :
+
+  $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
+  $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
+
+Copy the Linux kernel and its Device tree :
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp socfpga.dtb uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs :
+
+  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
+
+It's Done!
+
+
+Finish
+======
+
+Eject your SDcard, insert it in your SoCkit, and power it up.
+
+if you want a serial console, you can plug a micro B USB cable on the USB-UART
+port, the serial port config to used is 57600/8-N-1.
+
+
+
+--
+Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
diff --git a/board/altera/sockit/uboot-sockit-preloader-sample-design.patch b/board/altera/sockit/uboot-sockit-preloader-sample-design.patch
new file mode 100644
index 0000000..ddf0abc
--- /dev/null
+++ b/board/altera/sockit/uboot-sockit-preloader-sample-design.patch
@@ -0,0 +1,820 @@ 
+From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
+From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+Date: Thu, 20 Feb 2014 11:51:31 -0500
+Subject: [PATCH] board: add to sockit a working preloader design
+
+---
+ board/altera/socfpga_cyclone5/build.h              |   2 +-
+ board/altera/socfpga_cyclone5/iocsr_config.c       | 314 ++++++++++-----------
+ board/altera/socfpga_cyclone5/pinmux_config.c      |  32 +--
+ board/altera/socfpga_cyclone5/pinmux_config.h      |   8 +-
+ board/altera/socfpga_cyclone5/sdram/sdram_config.h |  14 +-
+ .../altera/socfpga_cyclone5/sdram/sequencer_auto.h |  16 +-
+ .../sdram/sequencer_auto_ac_init.c                 |  16 +-
+ .../socfpga_cyclone5/sdram/sequencer_defines.h     |  34 +--
+ 8 files changed, 218 insertions(+), 218 deletions(-)
+
+diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
+index e5d9c3c..a369015 100644
+--- a/board/altera/socfpga_cyclone5/build.h
++++ b/board/altera/socfpga_cyclone5/build.h
+@@ -29,7 +29,7 @@
+  * Handoff files must provide user option whether to
+  * enable watchdog during preloader execution phase
+  */
+-#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(0)
++#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(1)
+ 
+ /*
+  * Handoff files must provide user option whether to enable
+diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
+index fa663e1..90fc154 100644
+--- a/board/altera/socfpga_cyclone5/iocsr_config.c
++++ b/board/altera/socfpga_cyclone5/iocsr_config.c
+@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
+ 	0xC0000000,
+ 	0x0000003F,
+ 	0x00008000,
+-	0x00020080,
+-	0x08020000,
+-	0x08000000,
+-	0x00018020,
++	0x00060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
+ 	0x00000000,
+ 	0x00004000,
+-	0x00010040,
+-	0x04010000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x000300C0,
++	0x0C030000,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x00020000,
+-	0x02008000,
+-	0x02000000,
+-	0x00000008,
+-	0x00002008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+ };
+ 
+ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+-	0x000C0300,
+-	0x10040000,
+-	0x100000C0,
+-	0x00000040,
+-	0x00010040,
++	0x00100000,
++	0x300C0000,
++	0x300000C0,
++	0x000000C0,
++	0x000300C0,
+ 	0x00008000,
+ 	0x00080000,
+-	0x18060000,
+-	0x18000000,
+-	0x00000060,
+-	0x00018060,
++	0x20000000,
++	0x00000000,
++	0x00000080,
++	0x00020000,
+ 	0x00004000,
+-	0x00010040,
++	0x000300C0,
+ 	0x10000000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
++	0x06018060,
++	0x06018000,
+ 	0x01FE0000,
+ 	0xF8000000,
+ 	0x00000007,
+ 	0x00001000,
+-	0x00004010,
+-	0x01004000,
+-	0x01000000,
+-	0x00003004,
+-	0x00001004,
++	0x0000C030,
++	0x0300C000,
++	0x03000000,
++	0x0000300C,
++	0x0000300C,
+ 	0x00000800,
+ 	0x00000000,
+ 	0x00000000,
+-	0x00800000,
+-	0x00000002,
++	0x01800000,
++	0x00000006,
+ 	0x00002000,
+ 	0x00000400,
+ 	0x00000000,
+-	0x00401000,
++	0x00C03000,
+ 	0x00000003,
+ 	0x00000000,
+ 	0x00000000,
+ 	0x00000200,
+-	0x00600802,
++	0x00601806,
+ 	0x00000000,
+-	0x80200000,
+-	0x80000600,
+-	0x00000200,
++	0x80600000,
++	0x80000601,
++	0x00000601,
+ 	0x00000100,
+-	0x00300401,
+-	0xC0100400,
+-	0x40100000,
+-	0x40000300,
+-	0x000C0100,
++	0x00300C03,
++	0xC0300C00,
++	0xC0300000,
++	0xC0000300,
++	0x000C0300,
+ 	0x00000080,
+ };
+ 
+ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+-	0x80040100,
++	0x300C0300,
+ 	0x00000000,
+ 	0x0FF00000,
+ 	0x00000000,
+-	0x0C010040,
++	0x0C0300C0,
+ 	0x00008000,
+-	0x18020080,
+-	0x00000000,
+-	0x08000000,
+-	0x00040020,
+-	0x06018060,
++	0x18060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
++	0x00018060,
+ 	0x00004000,
+-	0x0C010040,
+-	0x04010000,
++	0x000300C0,
++	0x0C030000,
+ 	0x00000030,
+ 	0x00000000,
+-	0x03004010,
++	0x0300C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
+-	0x02000018,
+-	0x00006008,
+-	0x01802008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+-	0x03004010,
+-	0x01004000,
+-	0x0100000C,
+-	0x00003004,
+-	0x00C01004,
++	0x0000C030,
++	0x00000000,
++	0x03000000,
++	0x0000000C,
++	0x00C0300C,
+ 	0x00000800,
+ };
+ 
+@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
+-	0x01A01C70,
++	0x34059606,
++	0x01A03CF0,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
++	0x59606803,
++	0x03CF0340,
+ 	0xD000001A,
+ 	0x068030C0,
+ 	0x10040000,
+@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
++	0x34059606,
+ 	0x01A00000,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
+-	0xD00E381A,
++	0x59606803,
++	0x03CF0340,
++	0xD01E781A,
+ 	0x068030C0,
+ 	0x10040000,
+ 	0x00200000,
+@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x01860680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00015000,
+@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
+-	0x821A00C3,
++	0xF5DE791E,
++	0x0356D348,
++	0x821A02CB,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x04000002,
+ 	0x00820000,
+ 	0x00489000,
+-	0x001A1A1A,
+-	0x085506A0,
+-	0x0000E1D4,
+-	0x045506A0,
+-	0x0000E1D4,
+-	0x085506A0,
+-	0x8000E1D4,
++	0x801A1A1A,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
+ 	0x00000200,
+ 	0x00000004,
+-	0x04000000,
+-	0x00000009,
+-	0x00002410,
++	0x00040000,
++	0x10000000,
++	0x00000000,
+ 	0x00000040,
+-	0x41000000,
+-	0x00002082,
+-	0x00000350,
+-	0x000000DA,
++	0x00010000,
++	0x40002000,
++	0x00000100,
++	0x40000002,
++	0x00000100,
++	0x40000002,
+ 	0x00000100,
+ 	0x40000002,
+ 	0x00000100,
+ 	0x00000002,
+-	0x042A8350,
+-	0x000070EA,
+-	0x86000000,
+-	0x08000004,
++	0x00020000,
++	0x08000000,
+ 	0x00000000,
+-	0x00482000,
+-	0x21800000,
+-	0x00101061,
+-	0x021541A8,
+-	0x00003875,
+-	0x011541A8,
+-	0x00003875,
+-	0x021541A8,
+-	0x20003875,
++	0x00000020,
++	0x00008000,
++	0x20001000,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
+ 	0x00000080,
+ 	0x00000001,
+-	0x41000000,
+-	0x00000002,
+-	0x00FF0904,
++	0x00010000,
++	0x04000000,
++	0x00FF0000,
+ 	0x00000000,
+-	0x90400000,
+-	0x00000820,
++	0x00004000,
++	0x00000800,
+ 	0x80000001,
+-	0x38D612AF,
+-	0x86F8E38E,
+-	0x0A0A78B4,
+-	0x000D020A,
++	0x00041419,
++	0x40000000,
++	0x04000816,
++	0x000D0000,
+ 	0x00006800,
+-	0x028A4320,
+-	0xEBB4D23D,
+-	0x8F65E791,
+-	0xA47A0F3C,
+-	0x0001A769,
+-	0x00410D00,
++	0x00000340,
++	0xD000001A,
++	0x06800000,
++	0x00340000,
++	0x0001A000,
++	0x00000D00,
+ 	0x40000068,
+-	0x3D000003,
+-	0x91EBB4D2,
+-	0x3C8F65E7,
+-	0x69A47A0F,
+-	0x000001A7,
++	0x1A000003,
++	0x00D00000,
++	0x00068000,
++	0x00003400,
++	0x000001A0,
++	0x00000401,
++	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+-	0x00000540,
+-	0x000003A8,
+-	0x10AA0D40,
+-	0x8001C3A8,
++	0x00000401,
++	0x80000008,
+ 	0x0000007F,
++	0x20000000,
+ 	0x00000000,
+-	0x00004060,
+-	0xE1208000,
++	0xE0000080,
+ 	0x0000001F,
+-	0x00004100,
++	0x00004000,
+ };
+ 
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
+index 730067e..cfd74cd 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.c
++++ b/board/altera/socfpga_cyclone5/pinmux_config.c
+@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	0, /* EMACIO18 */
+ 	0, /* EMACIO19 */
+ 	3, /* FLASHIO0 */
+-	3, /* FLASHIO1 */
++	0, /* FLASHIO1 */
+ 	3, /* FLASHIO2 */
+ 	3, /* FLASHIO3 */
+ 	0, /* FLASHIO4 */
+@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	3, /* FLASHIO9 */
+ 	3, /* FLASHIO10 */
+ 	3, /* FLASHIO11 */
+-	3, /* GENERALIO0 */
+-	3, /* GENERALIO1 */
+-	3, /* GENERALIO2 */
+-	3, /* GENERALIO3 */
+-	3, /* GENERALIO4 */
+-	3, /* GENERALIO5 */
+-	3, /* GENERALIO6 */
+-	3, /* GENERALIO7 */
+-	3, /* GENERALIO8 */
++	0, /* GENERALIO0 */
++	1, /* GENERALIO1 */
++	1, /* GENERALIO2 */
++	1, /* GENERALIO3 */
++	1, /* GENERALIO4 */
++	0, /* GENERALIO5 */
++	0, /* GENERALIO6 */
++	0, /* GENERALIO7 */
++	0, /* GENERALIO8 */
+ 	3, /* GENERALIO9 */
+ 	3, /* GENERALIO10 */
+ 	3, /* GENERALIO11 */
+ 	3, /* GENERALIO12 */
+-	2, /* GENERALIO13 */
+-	2, /* GENERALIO14 */
+-	3, /* GENERALIO15 */
+-	3, /* GENERALIO16 */
+-	2, /* GENERALIO17 */
+-	2, /* GENERALIO18 */
++	0, /* GENERALIO13 */
++	0, /* GENERALIO14 */
++	1, /* GENERALIO15 */
++	1, /* GENERALIO16 */
++	1, /* GENERALIO17 */
++	1, /* GENERALIO18 */
+ 	0, /* GENERALIO19 */
+ 	0, /* GENERALIO20 */
+ 	0, /* GENERALIO21 */
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
+index fb483ab..64c750a 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.h
++++ b/board/altera/socfpga_cyclone5/pinmux_config.h
+@@ -11,15 +11,15 @@
+ #define CONFIG_HPS_UART0 (1)
+ #define CONFIG_HPS_UART1 (0)
+ #define CONFIG_HPS_TRACE (0)
+-#define CONFIG_HPS_I2C0 (1)
+-#define CONFIG_HPS_I2C1 (0)
++#define CONFIG_HPS_I2C0 (0)
++#define CONFIG_HPS_I2C1 (1)
+ #define CONFIG_HPS_I2C2 (0)
+ #define CONFIG_HPS_I2C3 (0)
+ #define CONFIG_HPS_SPIM0 (1)
+-#define CONFIG_HPS_SPIM1 (0)
++#define CONFIG_HPS_SPIM1 (1)
+ #define CONFIG_HPS_SPIS0 (0)
+ #define CONFIG_HPS_SPIS1 (0)
+-#define CONFIG_HPS_CAN0 (1)
++#define CONFIG_HPS_CAN0 (0)
+ #define CONFIG_HPS_CAN1 (0)
+ 
+ #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+index b90d6f3..dd027ef 100755
+--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
++++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+@@ -4,16 +4,16 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			(2)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(1)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(0)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		(1)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		(10)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(6)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(7)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(11)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			(12)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			(104)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		(3120)
+@@ -21,7 +21,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		(4)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			(14)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			(20)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			(4)
+@@ -33,7 +33,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		(15)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(40)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(32)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			(2)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+index e8c5484..919676d 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+@@ -34,7 +34,7 @@
+ #define __RW_MGR_ac_read_en 0x21
+ #define __RW_MGR_ac_mrs3_mirr 0x0C
+ #define __RW_MGR_ac_mrs2 0x05
+-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
++#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
+ #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
+ #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
+@@ -46,8 +46,8 @@
+ #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
+ #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
+-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
++#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
+ #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
+@@ -55,21 +55,21 @@
+ #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
+ #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
+-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
++#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
+ #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
+ #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
+ #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
+ #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
+-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
++#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
+ #define __RW_MGR_CONTENT_ac_ref 0x10480000
+ #define __RW_MGR_CONTENT_ac_nop 0x30780000
+ #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
+-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
++#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
+ #define __RW_MGR_CONTENT_ac_read_en 0x33780000
+ #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
+-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
++#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
+ 
+ #define __RW_MGR_READ_B2B_WAIT2 0x6A
+ #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+index e16efa1..20b4ca1 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
+ {
+ 	0x20700000,
+ 	0x20780000,
+-	0x10080431,
+-	0x10080530,
+-	0x10090044,
+-	0x100a0008,
++	0x10080471,
++	0x10080570,
++	0x10090006,
++	0x100a0218,
+ 	0x100b0000,
+ 	0x10380400,
+-	0x10080449,
+-	0x100804c8,
+-	0x100a0024,
+-	0x10090010,
++	0x10080469,
++	0x100804e8,
++	0x100a0006,
++	0x10090218,
+ 	0x100b0000,
+ 	0x30780000,
+ 	0x38780000,
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+index 52faf3f..b85b85c 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+@@ -1,28 +1,28 @@
+ #ifndef _SEQUENCER_DEFINES_H_
+ #define _SEQUENCER_DEFINES_H_
+ 
+-#define AC_ROM_MR1_MIRR 0000000100100
++#define AC_ROM_MR1_MIRR 0000000000110
+ #define AC_ROM_MR1_OCD_ENABLE
+-#define AC_ROM_MR2_MIRR 0000000010000
++#define AC_ROM_MR2_MIRR 0001000011000
+ #define AC_ROM_MR3_MIRR 0000000000000
+ #define AC_ROM_MR0_CALIB
+-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
+-#define AC_ROM_MR0_DLL_RESET 0010100110000
+-#define AC_ROM_MR0_MIRR 0010001001001
+-#define AC_ROM_MR0 0010000110001
+-#define AC_ROM_MR1 0000001000100
+-#define AC_ROM_MR2 0000000001000
++#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
++#define AC_ROM_MR0_DLL_RESET 0010101110000
++#define AC_ROM_MR0_MIRR 0010001101001
++#define AC_ROM_MR0 0010001110001
++#define AC_ROM_MR1 0000000000110
++#define AC_ROM_MR2 0001000011000
+ #define AC_ROM_MR3 0000000000000
+ #define AFI_CLK_FREQ 401
+ #define AFI_RATE_RATIO 1
+ #define ARRIAVGZ 0
+ #define ARRIAV 0
+-#define AVL_CLK_FREQ 67
++#define AVL_CLK_FREQ 81
+ #define BFM_MODE 0
+ #define BURST2 0
+ #define CALIBRATE_BIT_SLIPS 0
+-#define CALIB_LFIFO_OFFSET 7
+-#define CALIB_VFIFO_OFFSET 5
++#define CALIB_LFIFO_OFFSET 11
++#define CALIB_VFIFO_OFFSET 9
+ #define CYCLONEV 1
+ #define DDR2 0
+ #define DDR3 1
+@@ -89,20 +89,20 @@
+ #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
+ #define RW_MGR_MEM_CLK_EN_WIDTH 1
+ #define RW_MGR_MEM_CONTROL_WIDTH 1
+-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
+-#define RW_MGR_MEM_DATA_WIDTH 40
++#define RW_MGR_MEM_DATA_MASK_WIDTH 4
++#define RW_MGR_MEM_DATA_WIDTH 32
+ #define RW_MGR_MEM_DQ_PER_READ_DQS 8
+ #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
+-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
++#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
++#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+ #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+ #define RW_MGR_MEM_NUMBER_OF_RANKS 1
+ #define RW_MGR_MEM_ODT_WIDTH 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+ #define RW_MGR_MR0_BL 1
+-#define RW_MGR_MR0_CAS_LATENCY 3
+-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
++#define RW_MGR_MR0_CAS_LATENCY 7
++#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+ #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
+ #define SKEW_CALIBRATION 0
+ #define STATIC_FULL_CALIBRATION 1
+-- 
+1.9.0
+
diff --git a/configs/altera_sockit_defconfig b/configs/altera_sockit_defconfig
new file mode 100644
index 0000000..feb82d3
--- /dev/null
+++ b/configs/altera_sockit_defconfig
@@ -0,0 +1,32 @@ 
+BR2_arm=y
+BR2_cortex_a9=y
+
+BR2_ARM_EABIHF=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_FPU_NEON=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/sockit/post-image.sh"
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.rocketboards.org/linux-socfpga.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_13.07_RC5"
+BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5"
+
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_3=y
+
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.rocketboards.org/u-boot-socfpga.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_acds13.0sp1"
+BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/altera/sockit"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"