diff mbox

[v2,1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings

Message ID 1392908239-22645-1-git-send-email-geert@linux-m68k.org
State Superseded, archived
Headers show

Commit Message

Geert Uytterhoeven Feb. 20, 2014, 2:57 p.m. UTC
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Binding documentation:
  - Add future-proof "renesas,hspi-<soctype>" compatible values,
  - Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
  - Add reference to pinctrl documentation,
  - Add example bindings.

r8a7778 and r8a7779 dtsi:
  - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
    values,
  - Correct reference to parent interrupt controller
    (use "interrupt-parent" instead of "interrupt-controller"),
  - Add missing "#address-cells" and "#size-cells" properties, which are
    needed when populating the SPI buses.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [HSPI/BockW]
Cc: Mark Brown <broonie@linaro.org>
---
v2:
  - Add Tested-by
  - List full example compatible properties with soctypes instead of just
    the soctypes, so checkpatch can validate DTSes.

 Documentation/devicetree/bindings/spi/sh-hspi.txt |   28 ++++++++++++++++++---
 arch/arm/boot/dts/r8a7778.dtsi                    |   18 ++++++++-----
 arch/arm/boot/dts/r8a7779.dtsi                    |   18 ++++++++-----
 3 files changed, 49 insertions(+), 15 deletions(-)

Comments

Simon Horman Feb. 24, 2014, 12:28 a.m. UTC | #1
On Thu, Feb 20, 2014 at 03:57:18PM +0100, Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> 
> Binding documentation:
>   - Add future-proof "renesas,hspi-<soctype>" compatible values,
>   - Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
>   - Add reference to pinctrl documentation,
>   - Add example bindings.
> 
> r8a7778 and r8a7779 dtsi:
>   - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
>     values,
>   - Correct reference to parent interrupt controller
>     (use "interrupt-parent" instead of "interrupt-controller"),
>   - Add missing "#address-cells" and "#size-cells" properties, which are
>     needed when populating the SPI buses.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [HSPI/BockW]
> Cc: Mark Brown <broonie@linaro.org>
> ---
> v2:
>   - Add Tested-by
>   - List full example compatible properties with soctypes instead of just
>     the soctypes, so checkpatch can validate DTSes.

Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman Feb. 24, 2014, 12:28 a.m. UTC | #2
On Thu, Feb 20, 2014 at 03:57:19PM +0100, Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> 
> Add Spansion s25fl008k SPI FLASH and MTD partition, based on bockw legacy
> board code.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> v2:
>   - Add Tested-by

Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman Feb. 25, 2014, 1:54 a.m. UTC | #3
On Mon, Feb 24, 2014 at 09:28:40AM +0900, Simon Horman wrote:
> On Thu, Feb 20, 2014 at 03:57:18PM +0100, Geert Uytterhoeven wrote:
> > From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> > 
> > Binding documentation:
> >   - Add future-proof "renesas,hspi-<soctype>" compatible values,
> >   - Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
> >   - Add reference to pinctrl documentation,
> >   - Add example bindings.
> > 
> > r8a7778 and r8a7779 dtsi:
> >   - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
> >     values,
> >   - Correct reference to parent interrupt controller
> >     (use "interrupt-parent" instead of "interrupt-controller"),
> >   - Add missing "#address-cells" and "#size-cells" properties, which are
> >     needed when populating the SPI buses.
> > 
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> > Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [HSPI/BockW]
> > Cc: Mark Brown <broonie@linaro.org>
> > ---
> > v2:
> >   - Add Tested-by
> >   - List full example compatible properties with soctypes instead of just
> >     the soctypes, so checkpatch can validate DTSes.
> 
> Thanks, I have queued this up.

I have dropped this patch and because it updates both driver documentation
and shmobile code.

Please split the patch into two, one to be taken by the driver maintainer,
Mark Brown. And one to be taken by me. Thanks

I have also dropped the second patch of this series, which depends on this
patch.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 30b57b1c8a13..319bad4af875 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -1,7 +1,29 @@ 
 Renesas HSPI.
 
 Required properties:
-- compatible : 	"renesas,hspi"
-- reg : Offset and length of the register set for the device
-- interrupts : interrupt line used by HSPI
+- compatible       : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
+		     Examples with soctypes are:
+		       - "renesas,hspi-r8a7778" (R-Car M1)
+		       - "renesas,hspi-r8a7779" (R-Car H1)
+- reg              : Offset and length of the register set for the device
+- interrupt-parent : The phandle for the interrupt controller that
+		     services interrupts for this device
+- interrupts       : Interrupt specifier
+- #address-cells   : Must be <1>
+- #size-cells      : Must be <0>
+
+Pinctrl properties might be needed, too.  See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Example:
+
+	hspi0: spi@fffc7000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc7000 0x18>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 85c5b3b99f5e..3c6fab5c9702 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -204,26 +204,32 @@ 
 	};
 
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index d0561d4c7c46..8b1a336ee401 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -256,26 +256,32 @@ 
 	};
 
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };