net: fec: fix potential issue to avoid fec interrupt lost and crc error

The current flow: Set TX BD ready, and then set "INT" and "PINS" bit to
enable tx interrupt generation and crc checksum.

There has potential issue like as:
CPU			fec uDMA
Set tx ready bit
			uDMA start the BD transmission
Set "INT" bit
Set "PINS" bit
...

Above situation cause fec tx interrupt lost and fec MAC don't do
CRC checksum. The patch fix the potential issue.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 drivers/net/ethernet/freescale/fec_main.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

> -----Original Message-----
> From: Fugang Duan [mailto:B38611@freescale.com]
> Sent: Thursday, February 20, 2014 4:15 AM
> To: Li Frank-B20596; davem@davemloft.net
> Cc: netdev@vger.kernel.org
> Subject: [PATCH] net: fec: fix potential issue to avoid fec interrupt lost
> and crc error
> 
> The current flow: Set TX BD ready, and then set "INT" and "PINS" bit to
> enable tx interrupt generation and crc checksum.
> 
> There has potential issue like as:
> CPU			fec uDMA
> Set tx ready bit
> 			uDMA start the BD transmission
> Set "INT" bit
> Set "PINS" bit
> ...
> 
> Above situation cause fec tx interrupt lost and fec MAC don't do CRC checksum.
> The patch fix the potential issue.
> 
> Signed-off-by: Fugang Duan <B38611@freescale.com>

Acked-by: Frank Li <Frank.li@freescale.com>

> ---
>  drivers/net/ethernet/freescale/fec_main.c |   13 +++++++------
>  1 files changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index 45b8b22..739608b 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -390,12 +390,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct
> net_device *ndev)
>  			netdev_err(ndev, "Tx DMA memory map failed\n");
>  		return NETDEV_TX_OK;
>  	}
> -	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
> -	 * it's the last BD of the frame, and to put the CRC on the end.
> -	 */
> -	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
> -			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
> -	bdp->cbd_sc = status;
> 
>  	if (fep->bufdesc_ex) {
> 
> @@ -417,6 +411,13 @@ fec_enet_start_xmit(struct sk_buff *skb, struct
> net_device *ndev)
>  		}
>  	}
> 
> +	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
> +	 * it's the last BD of the frame, and to put the CRC on the end.
> +	 */
> +	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
> +			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
> +	bdp->cbd_sc = status;
> +
>  	bdp_pre = fec_enet_get_prevdesc(bdp, fep);
>  	if ((id_entry->driver_data & FEC_QUIRK_ERR006358) &&
>  	    !(bdp_pre->cbd_sc & BD_ENET_TX_READY)) {
> --
> 1.7.2.rc3
> 

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

From: Fugang Duan <B38611@freescale.com>
Date: Thu, 20 Feb 2014 18:14:39 +0800

> The current flow: Set TX BD ready, and then set "INT" and "PINS" bit to
> enable tx interrupt generation and crc checksum.
> 
> There has potential issue like as:
> CPU			fec uDMA
> Set tx ready bit
> 			uDMA start the BD transmission
> Set "INT" bit
> Set "PINS" bit
> ...
> 
> Above situation cause fec tx interrupt lost and fec MAC don't do
> CRC checksum. The patch fix the potential issue.
> 
> Signed-off-by: Fugang Duan <B38611@freescale.com>

Applied, thank you.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html