diff mbox

[net-next,v2] Documentation: broadcom-bcmgenet: fix address and cells properties

Message ID 1392762975-19132-1-git-send-email-f.fainelli@gmail.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Florian Fainelli Feb. 18, 2014, 10:36 p.m. UTC
This patch fixes a typo in the Device Tree binding for the
leading '#'.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v2:
- rebased on top of net-next/master 

 Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

David Miller Feb. 18, 2014, 10:44 p.m. UTC | #1
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 18 Feb 2014 14:36:15 -0800

> This patch fixes a typo in the Device Tree binding for the
> leading '#'.
> 
> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> Changes in v2:
> - rebased on top of net-next/master 

Applied, thanks for the quick turnaround.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
index 88fb958..f2febb9 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
@@ -8,8 +8,8 @@  Required properties:
   interrupt line, while the second cell is the interrupt for the ring
   RX and TX queues operating in ring mode
 - phy-mode: see ethernet.txt file in the same directory
-- address-cells: should be 1
-- size-cells: should be 1
+- #address-cells: should be 1
+- #size-cells: should be 1
 
 Optional properties:
 - clocks: When provided, must be two phandles to the functional clocks nodes
@@ -39,8 +39,8 @@  MDIO bus node required properties:
   parent node compatible property (e.g: brcm,genet-v4 pairs with
   brcm,genet-mdio-v4)
 - reg: address and length relative to the parent node base register address
-- address-cells: address cell for MDIO bus addressing, should be 1
-- size-cells: size of the cells for MDIO bus addressing, should be 0
+- #address-cells: address cell for MDIO bus addressing, should be 1
+- #size-cells: size of the cells for MDIO bus addressing, should be 0
 
 Ethernet PHY node properties: