Patchwork Author: Solomon Peachy <solomon@linux-wlan.com>

login
register
mail settings
Submitter Solomon Peachy
Date Aug. 20, 2009, 8:15 p.m.
Message ID <1250799307-10271-1-git-send-email-solomon@linux-wlan.com>
Download mbox | patch
Permalink /patch/31776/
State Superseded
Delegated to: Josh Boyer
Headers show

Comments

Solomon Peachy - Aug. 20, 2009, 8:15 p.m.
[PATCH v2] Add support for the ESTeem 195E (PPC405EP) SBC
    
    This patch adds support for the ESTeem 195E Hotfoot SBC.
    I've been maintaining this out-of-tree for some time now for
    older kernels, but recently I ported it to the new unified powerpc
    tree with the intent of pushing it upstream.
    
    The 195E boards use ancient versions of u-boot and a slightly mangled
    verison of the oft-abused ppcboot header.  (v2 of this patch moves the
    modified ppcboot header into ppcboot-hotfoot.h)
    
    There are several variants of the SBC deployed, single/dual
    ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
    having a single kernel image boot on all boards, the cuboot shim detects
    the differences and mangles the DTS tree appropriately.
    
    With the exception of the CF interface that was never populated on
    production boards, this code/DTS supports all boardpop options.
    
    Signed-off-by:  Solomon Peachy <solomon@linux-wlan.com>

Patch

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9ae7b7e..5a109a9 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -39,6 +39,7 @@  DTS_FLAGS	?= -p 1024
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@  src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -190,6 +191,7 @@  image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
+image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
new file mode 100644
index 0000000..8f697b9
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-hotfoot.c
@@ -0,0 +1,142 @@ 
+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot-hotfoot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+	u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); 
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+	dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+	dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+	dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); 
+	dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); 
+	
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+	/* Is this a single eth/serial board? */
+	if ((bd.bi_enet1addr[0] == 0) && 
+	    (bd.bi_enet1addr[1] == 0) &&
+	    (bd.bi_enet1addr[2] == 0) &&
+	    (bd.bi_enet1addr[3] == 0) &&
+	    (bd.bi_enet1addr[4] == 0) &&
+	    (bd.bi_enet1addr[5] == 0)) {
+		void *devp;
+
+		printf("Trimming devtree for single serial/eth board\n");
+
+		devp = finddevice("/plb/opb/serial@ef600300");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/serial@ef600300");
+		del_node(devp);
+
+		devp = finddevice("/plb/opb/ethernet@ef600900");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/ethernet@ef600900");
+		del_node(devp);
+	}
+
+	ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+	/* Fix up flash size in fdt for 4M boards. */
+	if (bd.bi_flashsize < 0x800000) {
+		u32 regs[NUM_REGS];
+		void *devp = finddevice("/plb/ebc/nor_flash@0");
+		if (!devp)
+			fatal("Can't find FDT node for nor_flash!??");
+
+		printf("Fixing devtree for 4M Flash\n");
+		
+		/* First fix up the base addresse */
+		getprop(devp, "reg", regs, sizeof(regs));
+		regs[0] = 0;
+		regs[1] = 0xffc00000;
+		regs[2] = 0x00400000;
+		setprop(devp, "reg", regs, sizeof(regs));
+		
+		/* Then the offsets */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+		if (!devp)
+			fatal("Can't find FDT node for partition@0");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+		if (!devp)
+			fatal("Can't find FDT node for partition@1");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+		if (!devp)
+			fatal("Can't find FDT node for partition@2");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+		if (!devp)
+			fatal("Can't find FDT node for partition@3");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+		if (!devp)
+			fatal("Can't find FDT node for partition@4");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+		if (!devp)
+			fatal("Can't find FDT node for partition@6");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		/* Delete the FeatFS node */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+		if (!devp)
+			fatal("Can't find FDT node for partition@5");
+		del_node(devp);
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = hotfoot_fixups;
+        platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
new file mode 100644
index 0000000..0ef9336
--- /dev/null
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -0,0 +1,297 @@ 
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+				      /* Actually a DS1339 */
+				      compatible = "dallas,ds1307"; 
+				      reg = <0x68>;
+				};
+
+				temp@4a { 
+				      /* Not present on all boards */
+				      compatible = "national,lm75";
+				      reg = <0x4a>;
+				};				
+			};
+
+			GPIO: gpio@ef600700 {
+			        #gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+			     compatible = "gpio-leds";
+			     status {
+			     	    label = "Status";
+			     	    gpios = <&GPIO 1 0>;
+			     };
+			     radiorx {
+			     	    label = "Rx";
+			     	    gpios = <&GPIO 0xe 0>;
+			     };
+			};
+
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+                                mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+                        nor_flash@0 {
+                                compatible = "cfi-flash";
+                                bank-width = <2>;
+                                reg = <0x0 0xff800000 0x00800000>;
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				
+                                partition@0 {
+                                        label = "Bootloader";
+                                        reg = <0x7c0000 0x40000>;
+                                        /* read-only; */
+                                };
+                                partition@1 {
+                                        label = "Env_and_Config_Primary";
+                                        reg = <0x400000 0x10000>;
+                                };
+                                partition@2 {
+                                        label = "Kernel";
+                                        reg = <0x420000 0x100000>;
+                                };
+                                partition@3 {
+                                        label = "Filesystem";
+                                        reg = <0x520000 0x2a0000>;
+                                };
+                                partition@4 {
+                                        label = "Env_and_Config_Secondary";
+                                        reg = <0x410000 0x10000>;
+                                };
+                                partition@5 {
+                                        label = "FeatFS";
+                                        reg = <0x000000 0x400000>;
+                                };
+                                partition@6 {
+                                        label = "Bootloader_Env";
+                                        reg = <0x7d0000 0x10000>;
+                                };
+			};
+		};
+
+                PCI0: pci@ec000000 {
+                        device_type = "pci";
+                        #interrupt-cells = <1>;
+                        #size-cells = <2>;
+                        #address-cells = <3>;
+                        compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+                        primary;
+                        reg = <0xeec00000 0x00000008    /* Config space access */
+                               0xeed80000 0x00000004    /* IACK */
+                               0xeed80000 0x00000004    /* Special cycle */
+                               0xef480000 0x00000040>;  /* Internal registers */
+
+                        /* Outbound ranges, one memory and one IO,
+                         * later cannot be changed. Chip supports a second
+                         * IO range but we don't use it for now
+                         */
+                        ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+                                  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+                        /* Inbound 2GB range starting at 0 */
+                        dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                        interrupt-map = <
+                                /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+                                0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+                                0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+                                /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+                                0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+                                0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+                        >;
+                };
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h
new file mode 100644
index 0000000..1a3e80b
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot-hotfoot.h
@@ -0,0 +1,133 @@ 
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/* 
+ * Unfortunately, the ESTeem Hotfoot board uses a mangled version of 
+ * ppcboot.h for historical reasons, and in the interest of having a 
+ * mainline kernel boot on the production board+bootloader, this was the 
+ * least-offensive solution.  Please direct all flames to:
+ *
+ *  Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * (This header is identical to ppcboot.h except for the 
+ *  TARGET_HOTFOOT bits)
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HOTFOOT)
+	unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_HOTFOOT)
+        int             bi_phynum[2];           /* Determines phy mapping */
+        int             bi_phymode[2];          /* Determines phy mode */
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a6e43cb..ec64264 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -40,6 +40,16 @@  config HCU4
 	help
 	  This option enables support for the Nestal Maschinen HCU4 board.
 
+config HOTFOOT
+        bool "Hotfoot"
+	depends on 40x
+	default n
+	select 405EP
+	select PPC40x_SIMPLE
+	select PCI
+        help
+	 This option enables support for the ESTEEM 195E Hotfoot board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 5fd5a59..546bbc2 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -54,7 +54,8 @@  static char *board[] __initdata = {
 	"amcc,acadia",
 	"amcc,haleakala",
 	"amcc,kilauea",
-	"amcc,makalu"
+	"amcc,makalu",
+	"est,hotfoot"
 };
 
 static int __init ppc40x_probe(void)