diff mbox

[v2,1/2] i2c: sunxi: Change i2c compatibles

Message ID 1391680285-16668-2-git-send-email-maxime.ripard@free-electrons.com
State Superseded
Headers show

Commit Message

Maxime Ripard Feb. 6, 2014, 9:51 a.m. UTC 
The Allwinner A10 compatibles were following a slightly different compatible
patterns than the rest of the SoCs for historical reasons. Move to the other
pattern for consistency across all Allwinner Socs.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt | 2 +-
 drivers/i2c/busses/i2c-mv64xxx.c                      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 582b465..5f4c0c8 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -4,7 +4,7 @@ 
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
+ - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-a10-i2c"
                      or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
                      Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
                      initial version of the SoC which had broken offload
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index b8c5187..eb72301 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -689,7 +689,7 @@  static const struct i2c_algorithm mv64xxx_i2c_algo = {
  *****************************************************************************
  */
 static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
-	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},