Patchwork [GIT,PULL] ARM: imx: device tree changes for 3.15, take 1

login
register
mail settings
Submitter Shawn Guo
Date Feb. 5, 2014, 12:23 p.m.
Message ID <20140205122258.GA13821@S2101-09.ap.freescale.net>
Download mbox
Permalink /patch/316942/
State New
Headers show

Pull-request

git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15

Comments

Shawn Guo - Feb. 5, 2014, 12:23 p.m.
Hi arm-soc folks,

This is basically imx-dt-3.14 pull request that missed the 3.14 merge
window with the pingrp removal series applied on top of.  It also
includes a few additional board support I collected since imx-dt-3.14.
There will be another round of IMX DT changes for 3.15 later, but this
one should be the majority.  Please pull, thanks.

Shawn


The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15

for you to fetch changes up to 6e63728deb5340f6a4988d98ff86227abf62c81d:

  ARM: dts: imx28-m28cu3: Remove 'reset-active-high' (2014-02-03 22:57:45 +0800)

----------------------------------------------------------------
i.MX device tree changes for 3.15:
 - New SoC device tree support for imx35 and imx50.
 - A good number of new i.MX6 boards support: SolidRun HummingBoard,
   cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family,
   DFI FS700-M60 and Zealz GK802.
 - A few other new i.MX boards support: imx25-eukrea, imx28-duckbill,
   imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac,
   MCIMX53-START-R and Ka-Ro TX53.
 - Add pinfunc headers for imx25, imx27 and imx50.
 - Make pinctrl nodes board specific to avoid floating board specific
   device tree blob with so many unused pinctrl data.
 - Use clock defines in imx5 DTS files.
 - Update imx6q-sabrelite device tree and add Dual Lite/Solo support.
 - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687
   ENET: Only the ENET wake-up interrupt request can wake the system
   from Wait mode.)
 - A plenty of random updates on various SoC and board device tree
   sources, adding pinctrl settings, device nodes, properties, etc.

----------------------------------------------------------------
Aida Mynzhasova (1):
      ARM: dts: mxs: add auart2 pinmux to imx28.dtsi

Alexander Shiyan (26):
      ARM: dts: i.MX51: Update CPU node
      ARM: dts: i.MX51: Add dummy clock to AUDMUX
      ARM: dts: i.MX51: Switch to use standard IRQ flags definitions
      ARM: dts: i.MX51: Move usbphy0 node from AIPS1
      ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
      ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
      ARM: dts: imx51-babbage: Define FEC reset pin
      ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support
      ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module
      ARM: dts: imx27-phytec-phycore-som: Update FEC node
      ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions
      ARM: dts: i.MX27: Configure GPIOs as "input" by default
      ARM: dts: i.MX: Move include "imxXX-pinfunc.h" into "imxXX-pingrp.h"
      ARM: dts: imx27-phytec-phycore-rdk: Change pinctrl settings for I2C1
      ARM: dts: imx27-phytec-phycore-som: trivial: Typo fix
      ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on module
      ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi
      ARM: dts: imx27-phytec-phycore-som: Add NFC pin group
      ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
      ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC
      ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups
      ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC
      ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM
      ARM: dts: i.MX27: Add SSI nodes
      ARM: dts: imx53-evk: Remove board support
      ARM: dts: i.MX51: Switch to use standard definitions for input subsystem

Alexandre Belloni (3):
      ARM: dts: mxs: add #io-channel-cells to mx28 lradc
      ARM: dts: mxs: Add iio-hwmon to mx28 soc
      ARM: dts: mxs: Add iio-hwmon to mx23 soc

Anson Huang (7):
      ARM: dts: imx6q: update setting of VDDARM_CAP voltage
      ARM: dts: imx6q: add vddsoc/pu setpoint info
      ARM: dts: imx6dl: enable cpufreq support
      ARM: dts: imx6qdl: add necessary thermal clk
      ARM: dts: imx6qdl-sabresd: Add power key support
      ARM: dts: imx6sl: add ocram device support
      ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.

Denis Carikli (15):
      of: add vendor prefix for Eukrea Electromatique.
      ARM: dts: i.MX25: Add ssi clocks and DMA events.
      ARM: dts: i.MX25: Add sdma script path.
      ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer.
      ARM: dts: imx51.dtsi: Add some pinmux pins.
      ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.
      ARM: dts: imx25: Add pinctrl functions and groups.
      ARM: dts: imx25.dtsi: label the iomuxc.
      ARM: dts: mxs: Add 18bit pin config for lcdif.
      ARM: dts: mxs: Add a new pin config for the usb0 ID.
      ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
      ARM: dts: mbimxsd25: Add sound support.
      ARM: dts: mbimxsd51: Add sound support.
      ARM: dts: imx53: Add gpio and input dt includes.
      ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.

Eric Bénard (1):
      ARM: mxs: Add support for the eukrea-cpuimx28.

Fabio Estevam (8):
      ARM: dts: imx6q-udoo: Add Ethernet support
      ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry
      ARM: dts: imx6q-sabrelite: Place 'status' as the last node
      ARM: dts: imx28-evk: Run I2C0 at 400kHz
      ARM: dts: imx6: Use 'vddarm' as the regulator name
      ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
      ARM: dts: imx6qdl-sabreauto: Add LVDS support
      ARM: dts: imx28-m28cu3: Remove 'reset-active-high'

Frank Li (1):
      ARM: dts: imxqdl: enable dma for spi

Greg Ungerer (3):
      ARM: dts: imx: add device tree pin definitions for the IMX50
      ARM: dts: imx: add IMX50 SoC device tree
      ARM: dts: imx: add device tree support for Freescale imx50evk board

Gwenhael Goavec-Merou (10):
      ARM: imx27-apf27dev: Add sdhci support
      ARM: dts: imx27-apf27dev: fix display size
      ARM: imx27: add pingroups for cspi, sdhc and framebuffer
      ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1
      ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer
      ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regulator gpio
      ARM: imx28: add apf28 specific initialization (macaddr)
      ARM: imx27: add pwm pingrp
      ARM: dts: apf27dev: Add pwm support
      ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys

Huang Shijie (1):
      ARM: dts: vf610: use the interrupt macros

John Tobias (1):
      ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.

Lothar Waßmann (4):
      ARM: dts: imx6qdl: add aliases for can interfaces
      ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode
      ARM: dts: imx6qdl: add new pingroup for audmux
      ARM: dts: imx53: add support for Ka-Ro TX53 modules

Lucas Stach (3):
      ARM: imx53: use clock defines in DTS files
      ARM: imx51: use clock defines in DTS files
      ARM: imx50: use clock defines in DTS files

Marek Vasut (6):
      ARM: dts: imx53: Fix display pinmux for M53EVK
      ARM: dts: imx53: Fix backlight for M53EVK
      ARM: dts: imx53: Add USB support for M53EVK
      ARM: dts: imx53: Add AHCI SATA DT node
      ARM: dts: imx53: Enable AHCI SATA for M53EVK
      ARM: dts: imx6q-sabrelite: Enable PCI express

Markus Pargmann (7):
      ARM: dts: imx27 pin functions
      ARM: dts: imx27 pingroups
      ARM: dts: imx27 iomux device node
      ARM: dts: imx27 phyCARD-S pinctrl
      ARM: dts: imx27 phycore move uart1 to rdk
      ARM: dts: imx27 phycore pinctrl
      ARM: DTS: imx5* imx6*, use imx51-ssi

Maxime Ripard (2):
      ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree
      ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT

Michael Grzeschik (1):
      ARM: i.MX28: dts: rename usbphy pin names

Michael Heimpold (1):
      ARM: mxs: add support for I2SE's duckbill series

Nicolin Chen (2):
      ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
      ARM: dts: imx6qdl: add spdif support for sabreauto

Peter Chen (3):
      ARM: dts: imx6q-arm2: enable USB OTG
      ARM: dts: imx6: add anatop phandle for usbphy
      ARM: dts: imx: add mxs phy controller id

Philipp Zabel (2):
      ARM: dts: imx6q-sabrelite: PHY reset is active-low
      ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree

Robert Nelson (1):
      ARM: dts: imx53: Enable AHCI SATA for imx53-qsb

Rostislav Lisovy (8):
      ARM: dts: i.MX53: Add alternate pinmux option for i2c_3
      ARM: dts: i.MX53: Internal keyboard controller
      ARM: dts: Add vendor prefix for Voipac Technologies s.r.o.
      ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
      ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
      ARM: dts: voipac: Improve fixed voltage regulator definition
      ARM: i.MX53: dts: NAND flash controller
      ARM: i.MX53: dts: USB host controller

Sascha Hauer (9):
      ARM: dts: imx53: Add mmc aliases
      ARM: dts: imx6q: Add spi4 alias
      ARM: dts: imx6qdl: Add mmc aliases
      ARM: dts: imx51: Add mmc aliases
      ARM: dts: imx6: Add DFI FS700-M60 board support
      ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support
      ARM: dts: imx6: edmqmx6: Add sata support
      ARM: dts: imx6: edmqmx6: Add LED support
      ARM: dts: imx6q: Add support for Zealz GK802

Shawn Guo (17):
      ARM: dts: imx6qdl: make pinctrl nodes board specific
      ARM: dts: imx6sl: make pinctrl nodes board specific
      ARM: dts: imx53: make pinctrl nodes board specific
      ARM: dts: imx51: make pinctrl nodes board specific
      ARM: dts: imx50: make pinctrl nodes board specific
      ARM: dts: imx53-mba53: create a container for fixed regulators
      ARM: dts: imx: use generic node name for fixed regulator
      ARM: dts: vf610: make pinctrl nodes board specific
      ARM: dts: imx6qdl: remove the use of pingrp macros
      ARM: dts: imx6sl: remove the use of pingrp macros
      ARM: dts: imx53: remove the use of pingrp macros
      ARM: dts: imx51: remove the use of pingrp macros
      ARM: dts: imx50: remove the use of pingrp macros
      ARM: dts: imx35: remove the use of pingrp macros
      ARM: dts: imx25: remove the use of pingrp macros
      ARM: dts: imx27: remove the use of pingrp macros
      ARM: dts: vf610: remove the use of pingrp macros

Silvio F (2):
      DT: Add Data Modul vendor prefix
      ARM: dts: imx6: Add support for imx6q dmo edmqmx6

Steffen Trumtrar (3):
      ARM: dts: Add support for the i.MX35.
      ARM: i.MX53: dts: move common QSB nodes to new file
      ARM: i.MX53: dts: add support for MCIMX53-START-R

Sébastien Szymanski (1):
      ARM: dts: imx28-apf28dev: add user button

Tim Harvey (3):
      ARM: dts: disable flexcan by default
      ARM: dts: added several new imx-pinmux groups
      ARM: dts: add Gateworks Ventana support

Troy Kisky (30):
      ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT
      ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag
      ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
      ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
      ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
      ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH
      ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups
      ARM: dts: imx: sabrelite: add Dual Lite/Solo support
      ARM: dts: imx6qdl-sabrelite: Add uart1 support
      ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio
      ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi
      ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4
      ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3
      ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1
      ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg
      ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
      ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk
      ARM: dts: imx6qdl-sabrelite: add pwms for backlights
      ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy
      ARM: dts: imx6qdl-sabrelite: fix ENET group
      ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg
      ARM: dts: imx: add nitrogen6x board
      ARM: dts: imx6qdl-sabrelite: add gpio-keys
      ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
      ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt
      ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD
      ARM: dts: imx6qdl: use interrupts-extended for fec
      ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
      ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
      ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.

Valentin Raevsky (1):
      ARM: dts: Add initial support for cm-fx6.

 .../devicetree/bindings/vendor-prefixes.txt        |    3 +
 arch/arm/boot/dts/Makefile                         |   30 +-
 arch/arm/boot/dts/imx23-evk.dts                    |    8 +-
 arch/arm/boot/dts/imx23-olinuxino.dts              |    5 +-
 arch/arm/boot/dts/imx23-stmp378x_devb.dts          |    5 +-
 arch/arm/boot/dts/imx23.dtsi                       |    8 +-
 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi       |   73 ++
 .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts  |  174 ++++
 arch/arm/boot/dts/imx25-pinfunc.h                  |  494 +++++++++++
 arch/arm/boot/dts/imx25.dtsi                       |   18 +-
 arch/arm/boot/dts/imx27-apf27.dts                  |   38 +
 arch/arm/boot/dts/imx27-apf27dev.dts               |  149 +++-
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |   61 +-
 arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts   |   42 +-
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts     |   97 +-
 ...ycore-som.dts => imx27-phytec-phycore-som.dtsi} |   95 +-
 arch/arm/boot/dts/imx27-pinfunc.h                  |  526 +++++++++++
 arch/arm/boot/dts/imx27.dtsi                       |  151 ++--
 arch/arm/boot/dts/imx28-apf28dev.dts               |   29 +-
 arch/arm/boot/dts/imx28-apx4devkit.dts             |    5 +-
 arch/arm/boot/dts/imx28-cfa10036.dts               |    2 +
 arch/arm/boot/dts/imx28-cfa10037.dts               |    7 +-
 arch/arm/boot/dts/imx28-cfa10049.dts               |   31 +-
 arch/arm/boot/dts/imx28-cfa10057.dts               |    7 +-
 arch/arm/boot/dts/imx28-cfa10058.dts               |    7 +-
 arch/arm/boot/dts/imx28-duckbill.dts               |  121 +++
 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts       |   71 ++
 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts       |   50 ++
 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi       |  326 +++++++
 arch/arm/boot/dts/imx28-evk.dts                    |   24 +-
 arch/arm/boot/dts/imx28-m28cu3.dts                 |   17 +-
 arch/arm/boot/dts/imx28-m28evk.dts                 |   18 +-
 arch/arm/boot/dts/imx28-sps1.dts                   |    7 +-
 arch/arm/boot/dts/imx28-tx28.dts                   |   23 +-
 arch/arm/boot/dts/imx28.dtsi                       |   65 +-
 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   81 ++
 .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts  |  143 +++
 arch/arm/boot/dts/imx35.dtsi                       |  359 ++++++++
 arch/arm/boot/dts/imx50-evk.dts                    |  119 +++
 arch/arm/boot/dts/imx50-pinfunc.h                  |  923 +++++++++++++++++++
 arch/arm/boot/dts/imx50.dtsi                       |  478 ++++++++++
 arch/arm/boot/dts/imx51-apf51.dts                  |   40 +-
 arch/arm/boot/dts/imx51-apf51dev.dts               |  102 ++-
 arch/arm/boot/dts/imx51-babbage.dts                |  248 +++++-
 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi       |   93 ++
 .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |  174 ++++
 arch/arm/boot/dts/imx51.dtsi                       |  459 ++--------
 arch/arm/boot/dts/imx53-ard.dts                    |   33 +-
 arch/arm/boot/dts/imx53-evk.dts                    |  126 ---
 arch/arm/boot/dts/imx53-m53evk.dts                 |  233 ++++-
 arch/arm/boot/dts/imx53-mba53.dts                  |   40 +-
 arch/arm/boot/dts/imx53-qsb-common.dtsi            |  336 +++++++
 arch/arm/boot/dts/imx53-qsb.dts                    |  210 +----
 arch/arm/boot/dts/imx53-qsrb.dts                   |  158 ++++
 arch/arm/boot/dts/imx53-smd.dts                    |  119 ++-
 arch/arm/boot/dts/imx53-tqma53.dtsi                |  175 +++-
 arch/arm/boot/dts/imx53-tx53-x03x.dts              |  315 +++++++
 arch/arm/boot/dts/imx53-tx53-x13x.dts              |  243 +++++
 arch/arm/boot/dts/imx53-tx53.dtsi                  |  511 ++++++++++-
 arch/arm/boot/dts/imx53-voipac-bsb.dts             |  159 ++++
 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi        |  277 ++++++
 arch/arm/boot/dts/imx53.dtsi                       |  663 +++-----------
 arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts         |   23 +
 arch/arm/boot/dts/imx6dl-gw51xx.dts                |   19 +
 arch/arm/boot/dts/imx6dl-gw52xx.dts                |   19 +
 arch/arm/boot/dts/imx6dl-gw53xx.dts                |   19 +
 arch/arm/boot/dts/imx6dl-gw54xx.dts                |   19 +
 arch/arm/boot/dts/imx6dl-nitrogen6x.dts            |   21 +
 arch/arm/boot/dts/imx6dl-pinfunc.h                 |    2 +
 arch/arm/boot/dts/imx6dl-sabrelite.dts             |   20 +
 arch/arm/boot/dts/imx6dl.dtsi                      |   29 +-
 arch/arm/boot/dts/imx6q-arm2.dts                   |  140 ++-
 arch/arm/boot/dts/imx6q-cm-fx6.dts                 |  107 +++
 arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts          |   23 +
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts            |  372 ++++++++
 arch/arm/boot/dts/imx6q-gk802.dts                  |  171 ++++
 arch/arm/boot/dts/imx6q-gw51xx.dts                 |   19 +
 arch/arm/boot/dts/imx6q-gw52xx.dts                 |   23 +
 arch/arm/boot/dts/imx6q-gw53xx.dts                 |   23 +
 arch/arm/boot/dts/imx6q-gw5400-a.dts               |  546 ++++++++++++
 arch/arm/boot/dts/imx6q-gw54xx.dts                 |   23 +
 arch/arm/boot/dts/imx6q-nitrogen6x.dts             |   25 +
 arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi         |   85 +-
 arch/arm/boot/dts/imx6q-pinfunc.h                  |    2 +
 arch/arm/boot/dts/imx6q-sabrelite.dts              |  178 +---
 arch/arm/boot/dts/imx6q-sbc6x.dts                  |   58 +-
 arch/arm/boot/dts/imx6q-udoo.dts                   |   54 +-
 arch/arm/boot/dts/imx6q.dtsi                       |   21 +-
 arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi       |  199 +++++
 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi              |  374 ++++++++
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi              |  490 ++++++++++
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi              |  553 ++++++++++++
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi              |  580 ++++++++++++
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi          |  422 +++++++++
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi           |  246 ++++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  423 +++++++++
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi             |  272 +++++-
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |  128 ++-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  938 +++-----------------
 arch/arm/boot/dts/imx6sl-evk.dts                   |  210 ++++-
 arch/arm/boot/dts/imx6sl.dtsi                      |  385 +++-----
 arch/arm/boot/dts/vf610-cosmic.dts                 |   29 +-
 arch/arm/boot/dts/vf610-twr.dts                    |   66 +-
 arch/arm/boot/dts/vf610.dtsi                       |  207 +----
 arch/arm/mach-mxs/mach-mxs.c                       |   33 +
 105 files changed, 14073 insertions(+), 3127 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
 create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h
 rename arch/arm/boot/dts/{imx27-phytec-phycore-som.dts => imx27-phytec-phycore-som.dtsi} (61%)
 create mode 100644 arch/arm/boot/dts/imx27-pinfunc.h
 create mode 100644 arch/arm/boot/dts/imx28-duckbill.dts
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
 create mode 100644 arch/arm/boot/dts/imx35.dtsi
 create mode 100644 arch/arm/boot/dts/imx50-evk.dts
 create mode 100644 arch/arm/boot/dts/imx50-pinfunc.h
 create mode 100644 arch/arm/boot/dts/imx50.dtsi
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
 delete mode 100644 arch/arm/boot/dts/imx53-evk.dts
 create mode 100644 arch/arm/boot/dts/imx53-qsb-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx53-qsrb.dts
 create mode 100644 arch/arm/boot/dts/imx53-tx53-x03x.dts
 create mode 100644 arch/arm/boot/dts/imx53-tx53-x13x.dts
 create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts
 create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen6x.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
 create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
 create mode 100644 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gk802.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
 create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
 create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6x.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
Arnd Bergmann - Feb. 6, 2014, 1:45 p.m.
On Wednesday 05 February 2014, Shawn Guo wrote:
> Hi arm-soc folks,
> 
> This is basically imx-dt-3.14 pull request that missed the 3.14 merge
> window with the pingrp removal series applied on top of.  It also
> includes a few additional board support I collected since imx-dt-3.14.
> There will be another round of IMX DT changes for 3.15 later, but this
> one should be the majority.  Please pull, thanks.

Hi Shawn,

no objections to the stuff you add here, but the way it's organized
is not good. Instead of adding the controversial patches first and
then reverting them, please redo the series so you don't actually
have the patches in the history. I see that you have rebased the
patches on 3.14-rc1 already so there really shouldn't be any cross-
tree dependencies that make it necessary to keep them in.

Also, because of the pure size of the pull request:

 105 files changed, 14073 insertions(+), 3127 deletions(-)

it would be nice to split it up into smaller units. A good
separation would be to have new board support in one pull
request and the changes to existing boards in another one.

	Arnd
Shawn Guo - Feb. 6, 2014, 3:01 p.m.
On Thu, Feb 06, 2014 at 02:45:05PM +0100, Arnd Bergmann wrote:
> On Wednesday 05 February 2014, Shawn Guo wrote:
> > Hi arm-soc folks,
> > 
> > This is basically imx-dt-3.14 pull request that missed the 3.14 merge
> > window with the pingrp removal series applied on top of.  It also
> > includes a few additional board support I collected since imx-dt-3.14.
> > There will be another round of IMX DT changes for 3.15 later, but this
> > one should be the majority.  Please pull, thanks.
> 
> Hi Shawn,
> 
> no objections to the stuff you add here, but the way it's organized
> is not good. Instead of adding the controversial patches first and
> then reverting them, please redo the series so you don't actually
> have the patches in the history. I see that you have rebased the
> patches on 3.14-rc1 already so there really shouldn't be any cross-
> tree dependencies that make it necessary to keep them in.

I haven't checked the patches one by one in the pull request, but it
probably means that I will have to redo most of the patches, because
every single new board dts and addition of device for existing board
have new pinctrl data along with them.  I will look at the work/effort
closer tomorrow.

> 
> Also, because of the pure size of the pull request:
> 
>  105 files changed, 14073 insertions(+), 3127 deletions(-)
> 
> it would be nice to split it up into smaller units. A good
> separation would be to have new board support in one pull
> request and the changes to existing boards in another one.

Ok, I will try.

Shawn
Heiko Stübner - Feb. 7, 2014, 10:04 a.m.
Hi Shawn,

Am Mittwoch, 5. Februar 2014, 20:23:01 schrieb Shawn Guo:
>  - Make pinctrl nodes board specific to avoid floating board specific
>    device tree blob with so many unused pinctrl data.

can you take a look at "dtc: add ability to make nodes conditional on them 
being referenced" [0] to see if it can help to solve the floating pinctrl 
problem more generic in the future?


Heiko


[0] http://www.spinics.net/lists/arm-kernel/msg303967.html
Shawn Guo - Feb. 9, 2014, 12:16 p.m.
On Thu, Feb 06, 2014 at 02:45:05PM +0100, Arnd Bergmann wrote:
> On Wednesday 05 February 2014, Shawn Guo wrote:
> > Hi arm-soc folks,
> > 
> > This is basically imx-dt-3.14 pull request that missed the 3.14 merge
> > window with the pingrp removal series applied on top of.  It also
> > includes a few additional board support I collected since imx-dt-3.14.
> > There will be another round of IMX DT changes for 3.15 later, but this
> > one should be the majority.  Please pull, thanks.
> 
> Hi Shawn,
> 
> no objections to the stuff you add here, but the way it's organized
> is not good. Instead of adding the controversial patches first and
> then reverting them, please redo the series so you don't actually
> have the patches in the history. I see that you have rebased the
> patches on 3.14-rc1 already so there really shouldn't be any cross-
> tree dependencies that make it necessary to keep them in.

Okay.  I just spent the weekend to rebuild the branch and reworked quite
a lot of patches to wipe the pingrp stuff from the history.

> 
> Also, because of the pure size of the pull request:
> 
>  105 files changed, 14073 insertions(+), 3127 deletions(-)
> 
> it would be nice to split it up into smaller units. A good
> separation would be to have new board support in one pull
> request and the changes to existing boards in another one.

Some new board support are built on top of the updates to the existing
files for purpose like sharing common part.  And some updates are added
on top of new board support along time goes.  So it's hard to make such
separation.  Considering the amount of imx6 changes these days, I chose
to split the branch into two, one for imx6 changes and the other for all
the rest.  Such separation does not involve too much interdependency.

I will send them as the updated pull request shortly.

Shawn
Shawn Guo - Feb. 10, 2014, 6:33 a.m.
On Fri, Feb 07, 2014 at 11:04:30AM +0100, Heiko Stübner wrote:
> Hi Shawn,
> 
> Am Mittwoch, 5. Februar 2014, 20:23:01 schrieb Shawn Guo:
> >  - Make pinctrl nodes board specific to avoid floating board specific
> >    device tree blob with so many unused pinctrl data.
> 
> can you take a look at "dtc: add ability to make nodes conditional on them 
> being referenced" [0] to see if it can help to solve the floating pinctrl 
> problem more generic in the future?

Yes, if it gets accepted, we will consider to use it in the future
projects.

Shawn

> [0] http://www.spinics.net/lists/arm-kernel/msg303967.html
>
Arnd Bergmann - Feb. 10, 2014, 3:19 p.m.
On Sunday 09 February 2014, Shawn Guo wrote:
> On Thu, Feb 06, 2014 at 02:45:05PM +0100, Arnd Bergmann wrote:
> > On Wednesday 05 February 2014, Shawn Guo wrote:

> > no objections to the stuff you add here, but the way it's organized
> > is not good. Instead of adding the controversial patches first and
> > then reverting them, please redo the series so you don't actually
> > have the patches in the history. I see that you have rebased the
> > patches on 3.14-rc1 already so there really shouldn't be any cross-
> > tree dependencies that make it necessary to keep them in.
> 
> Okay.  I just spent the weekend to rebuild the branch and reworked quite
> a lot of patches to wipe the pingrp stuff from the history.

Thanks!

> > it would be nice to split it up into smaller units. A good
> > separation would be to have new board support in one pull
> > request and the changes to existing boards in another one.
> 
> Some new board support are built on top of the updates to the existing
> files for purpose like sharing common part.  And some updates are added
> on top of new board support along time goes.  So it's hard to make such
> separation.  Considering the amount of imx6 changes these days, I chose
> to split the branch into two, one for imx6 changes and the other for all
> the rest.  Such separation does not involve too much interdependency.

Ok, good idea.

	Arnd