@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 13
-EXTRAVERSION = .16
+EXTRAVERSION = .17
NAME = Remoralised Urchins Update
# *DOCUMENTATION*
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ptrace.h>
+#include <linux/syscore_ops.h>
#include <asm/apic.h>
@@ -816,6 +817,18 @@ out:
return ret;
}
+static void ibs_eilvt_setup(void)
+{
+ /*
+ * Force LVT offset assignment for family 10h: The offsets are
+ * not assigned by the BIOS for this family, so the OS is
+ * responsible for doing it. If the OS assignment fails, fall
+ * back to BIOS settings and try to setup this.
+ */
+ if (boot_cpu_data.x86 == 0x10)
+ force_ibs_eilvt_setup();
+}
+
static inline int get_ibs_lvt_offset(void)
{
u64 val;
@@ -851,6 +864,36 @@ static void clear_APIC_ibs(void *dummy)
setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_FIX, 1);
}
+#ifdef CONFIG_PM
+
+static int perf_ibs_suspend(void)
+{
+ clear_APIC_ibs(NULL);
+ return 0;
+}
+
+static void perf_ibs_resume(void)
+{
+ ibs_eilvt_setup();
+ setup_APIC_ibs(NULL);
+}
+
+static struct syscore_ops perf_ibs_syscore_ops = {
+ .resume = perf_ibs_resume,
+ .suspend = perf_ibs_suspend,
+};
+
+static void perf_ibs_pm_init(void)
+{
+ register_syscore_ops(&perf_ibs_syscore_ops);
+}
+
+#else
+
+static inline void perf_ibs_pm_init(void) { }
+
+#endif
+
static int __cpuinit
perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
{
@@ -877,18 +920,12 @@ static __init int amd_ibs_init(void)
if (!caps)
return -ENODEV; /* ibs not supported by the cpu */
- /*
- * Force LVT offset assignment for family 10h: The offsets are
- * not assigned by the BIOS for this family, so the OS is
- * responsible for doing it. If the OS assignment fails, fall
- * back to BIOS settings and try to setup this.
- */
- if (boot_cpu_data.x86 == 0x10)
- force_ibs_eilvt_setup();
+ ibs_eilvt_setup();
if (!ibs_eilvt_valid())
goto out;
+ perf_ibs_pm_init();
get_online_cpus();
ibs_caps = caps;
/* make ibs_caps visible to other cpus: */
@@ -1113,7 +1113,7 @@ ENTRY(ftrace_caller)
pushl $0 /* Pass NULL as regs pointer */
movl 4*4(%esp), %eax
movl 0x4(%ebp), %edx
- leal function_trace_op, %ecx
+ movl function_trace_op, %ecx
subl $MCOUNT_INSN_SIZE, %eax
.globl ftrace_call
@@ -1171,7 +1171,7 @@ ENTRY(ftrace_regs_caller)
movl 12*4(%esp), %eax /* Load ip (1st parameter) */
subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */
movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */
- leal function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
+ movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
pushl %esp /* Save pt_regs as 4th parameter */
GLOBAL(ftrace_regs_call)
@@ -88,7 +88,7 @@ END(function_hook)
MCOUNT_SAVE_FRAME \skip
/* Load the ftrace_ops into the 3rd parameter */
- leaq function_trace_op, %rdx
+ movq function_trace_op(%rip), %rdx
/* Load ip into the first parameter */
movq RIP(%rsp), %rdi
@@ -1178,12 +1178,18 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
enum pipe pipe;
struct intel_crtc *intel_crtc;
+ dev_priv->ddi_plls.spll_refcount = 0;
+ dev_priv->ddi_plls.wrpll1_refcount = 0;
+ dev_priv->ddi_plls.wrpll2_refcount = 0;
+
for_each_pipe(pipe) {
intel_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- if (!intel_crtc->active)
+ if (!intel_crtc->active) {
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
continue;
+ }
intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
pipe);
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
#define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */
#define NUM_REAL_CORES 32 /* Number of Real cores per cpu */
-#define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */
+#define CORETEMP_NAME_LENGTH 19 /* String Length of attrs */
#define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */
#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
@@ -1276,7 +1276,7 @@ read_again:
/* Could not read all from this device, so we will
* need another r10_bio.
*/
- sectors_handled = (r10_bio->sectors + max_sectors
+ sectors_handled = (r10_bio->sector + max_sectors
- bio->bi_sector);
r10_bio->sectors = max_sectors;
spin_lock_irq(&conf->device_lock);
@@ -1284,7 +1284,7 @@ read_again:
bio->bi_phys_segments = 2;
else
bio->bi_phys_segments++;
- spin_unlock(&conf->device_lock);
+ spin_unlock_irq(&conf->device_lock);
/* Cannot call generic_make_request directly
* as that will be queued in __generic_make_request
* and subsequent mempool_alloc might block
@@ -3153,10 +3153,6 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
if (j == conf->copies) {
/* Cannot recover, so abort the recovery or
* record a bad block */
- put_buf(r10_bio);
- if (rb2)
- atomic_dec(&rb2->remaining);
- r10_bio = rb2;
if (any_working) {
/* problem is that there are bad blocks
* on other device(s)
@@ -3188,6 +3184,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
mirror->recovery_disabled
= mddev->recovery_disabled;
}
+ put_buf(r10_bio);
+ if (rb2)
+ atomic_dec(&rb2->remaining);
+ r10_bio = rb2;
break;
}
}
@@ -3420,7 +3420,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
*/
set_bit(R5_Insync, &dev->flags);
- if (rdev && test_bit(R5_WriteError, &dev->flags)) {
+ if (test_bit(R5_WriteError, &dev->flags)) {
/* This flag does not apply to '.replacement'
* only to .rdev, so make sure to check that*/
struct md_rdev *rdev2 = rcu_dereference(
@@ -3433,7 +3433,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
} else
clear_bit(R5_WriteError, &dev->flags);
}
- if (rdev && test_bit(R5_MadeGood, &dev->flags)) {
+ if (test_bit(R5_MadeGood, &dev->flags)) {
/* This flag does not apply to '.replacement'
* only to .rdev, so make sure to check that*/
struct md_rdev *rdev2 = rcu_dereference(
@@ -122,7 +122,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
.name = "cb_pci-dio48h",
.vendor = PCI_VENDOR_ID_CB,
.device = PCI_DEVICE_ID_CB_PCIDIO48H,
- .dio_badr = 1,
+ .dio_badr = 1, /* only for older boards */
.n_8255 = 2,
}, {
.name = "cb_pci-dio96h",
@@ -224,6 +224,7 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
unsigned long len;
int ret;
int i;
+ int dio_badr;
board = pci_8255_find_boardinfo(dev, pcidev);
if (!board)
@@ -239,8 +240,21 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
return ret;
- iobase = pci_resource_start(pcidev, board->dio_badr);
- len = pci_resource_len(pcidev, board->dio_badr);
+ dio_badr = board->dio_badr;
+ /*
+ * For Measurement Computing / ComputerBoards PCI-DIO48H, use the
+ * PCI BAR 2 region, if non-zero length, else use the PCI BAR 1 region
+ * from the board entry. This is because the board was redesigned to
+ * use a different PCI interface chip, with the user registers in a
+ * different PCI BAR region.
+ */
+ if (pcidev->vendor == PCI_VENDOR_ID_CB &&
+ pcidev->device == PCI_DEVICE_ID_CB_PCIDIO48H &&
+ pci_resource_len(pcidev, 2))
+ dio_badr = 2;
+
+ iobase = pci_resource_start(pcidev, dio_badr);
+ len = pci_resource_len(pcidev, dio_badr);
if (board->is_mmio) {
devpriv->mmio_base = ioremap(iobase, len);
@@ -331,8 +331,8 @@ static int apci1032_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
if (dev->irq) {
dev->read_subdev = s;
- s->type = COMEDI_SUBD_DI | SDF_CMD_READ;
- s->subdev_flags = SDF_READABLE;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
s->n_chan = 1;
s->maxdata = 1;
s->range_table = &range_digital;
@@ -2710,8 +2710,13 @@ char *d_path(const struct path *path, char *buf, int buflen)
* thus don't need to be hashed. They also don't need a name until a
* user wants to identify the object in /proc/pid/fd/. The little hack
* below allows us to generate a name for these objects on demand:
+ *
+ * Some pseudo inodes are mountable. When they are mounted
+ * path->dentry == path->mnt->mnt_root. In that case don't call d_dname
+ * and instead have d_path return the mounted path.
*/
- if (path->dentry->d_op && path->dentry->d_op->d_dname)
+ if (path->dentry->d_op && path->dentry->d_op->d_dname &&
+ (!IS_ROOT(path->dentry) || path->dentry != path->mnt->mnt_root))
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
get_fs_root(current->fs, &root);
@@ -517,13 +517,16 @@ writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
}
WARN_ON(inode->i_state & I_SYNC);
/*
- * Skip inode if it is clean. We don't want to mess with writeback
- * lists in this function since flusher thread may be doing for example
- * sync in parallel and if we move the inode, it could get skipped. So
- * here we make sure inode is on some writeback list and leave it there
- * unless we have completely cleaned the inode.
+ * Skip inode if it is clean and we have no outstanding writeback in
+ * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
+ * function since flusher thread may be doing for example sync in
+ * parallel and if we move the inode, it could get skipped. So here we
+ * make sure inode is on some writeback list and leave it there unless
+ * we have completely cleaned the inode.
*/
- if (!(inode->i_state & I_DIRTY))
+ if (!(inode->i_state & I_DIRTY) &&
+ (wbc->sync_mode != WB_SYNC_ALL ||
+ !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
goto out;
inode->i_state |= I_SYNC;
spin_unlock(&inode->i_lock);
@@ -1440,17 +1440,19 @@ static int nilfs_segctor_collect(struct nilfs_sc_info *sci,
nilfs_clear_logs(&sci->sc_segbufs);
- err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
- if (unlikely(err))
- return err;
-
if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
sci->sc_freesegs,
sci->sc_nfreesegs,
NULL);
WARN_ON(err); /* do not happen */
+ sci->sc_stage.flags &= ~NILFS_CF_SUFREED;
}
+
+ err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
+ if (unlikely(err))
+ return err;
+
nadd = min_t(int, nadd << 1, SC_MAX_SEGDELTA);
sci->sc_stage = prev_stage;
}
@@ -780,21 +780,16 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
if (flags & MSG_CMSG_COMPAT)
return -EINVAL;
- if (COMPAT_USE_64BIT_TIME)
- return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
- flags | MSG_CMSG_COMPAT,
- (struct timespec *) timeout);
-
if (timeout == NULL)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, NULL);
- if (get_compat_timespec(&ktspec, timeout))
+ if (compat_get_timespec(&ktspec, timeout))
return -EFAULT;
datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, &ktspec);
- if (datagrams > 0 && put_compat_timespec(&ktspec, timeout))
+ if (datagrams > 0 && compat_put_timespec(&ktspec, timeout))
datagrams = -EFAULT;
return datagrams;
@@ -421,8 +421,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
struct rds_ib_refill_cache *cache)
{
unsigned long flags;
- struct list_head *old;
- struct list_head __percpu *chpfirst;
+ struct list_head *old, *chpfirst;
local_irq_save(flags);
@@ -432,7 +431,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
else /* put on front */
list_add_tail(new_item, chpfirst);
- __this_cpu_write(chpfirst, new_item);
+ __this_cpu_write(cache->percpu->first, new_item);
__this_cpu_inc(cache->percpu->count);
if (__this_cpu_read(cache->percpu->count) < RDS_IB_RECYCLE_BATCH_COUNT)
@@ -452,7 +451,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
} while (old);
- __this_cpu_write(chpfirst, NULL);
+ __this_cpu_write(cache->percpu->first, NULL);
__this_cpu_write(cache->percpu->count, 0);
end:
local_irq_restore(flags);