diff mbox

[v5,4/8] hw: arm_gic: Keep track of SGI sources

Message ID 1390941165-2079-5-git-send-email-christoffer.dall@linaro.org
State New
Headers show

Commit Message

Christoffer Dall Jan. 28, 2014, 8:32 p.m. UTC
Right now the arm gic emulation doesn't keep track of the source of an
SGI (which apparently Linux guests don't use, or they're fine with
assuming CPU 0 always).

Add the necessary matrix on the GICState structure and maintain the data
when setting and clearing the pending state of an IRQ and make the state
visible to the guest.

Note that we always choose to present the source as the lowest-numbered
CPU in case multiple cores have signalled the same SGI number to a core
on the system.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Changes [v4 -> v5]:
 - Add braces to if-statement
 - Make GICD_CPENDSGIR and GICD_SPENDSGIR guest visible for v1/v2 GIC

Changes [v3 -> v4]:
 - Assert that we are not messing with SGI state in gic_set_irq
 - Move bugfix of GICD_SPENDR to pending fixes patch
 - Get rid of the idea of git_clear_pending and handle clearing of
   source bits directly in gic_acknowledge_irq
 - Don't loop through CPUs to clear SGI sources
 - Return source CPU directly from gic_acknowledge_irq
 - Rename sgi_source to sgi_pending
 - Add comment (courtesey of Peter) to sgi_pending struct member.

Changes [v2 -> v3]:
 - Changed ffs(x) - 1 to ctz32
 - Changed cpu type to int in gic_clear_pending to avoid cast
 - Really try to fix the endless loop bug
 - Change gic_clear_pending to only clear the pending bit of SGIs if all
   CPUs do not have that IRQ pending from any CPUs.
 - Wrap long line in gic_internal.h
 - Fix bug allowing setting SGIs through the GICD_SPENDR

Changes [v1 -> v2]:
 - Fixed endless loop bug
 - Bump version_id and minimum_version_id on vmstate struct

 hw/intc/arm_gic.c                | 94 +++++++++++++++++++++++++++++++++++-----
 hw/intc/arm_gic_common.c         |  5 ++-
 include/hw/intc/arm_gic_common.h |  7 +++
 3 files changed, 93 insertions(+), 13 deletions(-)

Comments

Peter Maydell Jan. 31, 2014, 6:33 p.m. UTC | #1
On 28 January 2014 20:32, Christoffer Dall <christoffer.dall@linaro.org> wrote:
> Right now the arm gic emulation doesn't keep track of the source of an
> SGI (which apparently Linux guests don't use, or they're fine with
> assuming CPU 0 always).
>
> Add the necessary matrix on the GICState structure and maintain the data
> when setting and clearing the pending state of an IRQ and make the state
> visible to the guest.
>
> Note that we always choose to present the source as the lowest-numbered
> CPU in case multiple cores have signalled the same SGI number to a core
> on the system.

> @@ -531,9 +576,29 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
>                  GIC_CLEAR_EDGE_TRIGGER(irq + i);
>              }
>          }
> -    } else {
> +    } else if (offset < 0xf10) {
>          /* 0xf00 is only handled for 32-bit writes.  */
>          goto bad_reg;
> +    } else if (offset < 0xf20) {
> +        /* GICD_CPENDSGIRn */
> +        if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
> +            goto bad_reg;
> +        }
> +        irq = (offset - 0xf10);
> +
> +        GIC_CLEAR_PENDING(irq, 1 << cpu);
> +        s->sgi_pending[irq][cpu] &= ~value;

This doesn't look quite right. If the SGI is pending
from multiple source CPUs and we use CPENDSGIRn to
clear the bits corresponding to only some of those
source CPUs, then the interrupt as a whole should stay
pending on this (target) CPU. I think this is:

    s->sgi_pending[irq][cpu] &= ~value;
    if (s->sgi_pending[irq][cpu] == 0) {
        GIC_CLEAR_PENDING(irq, 1 << cpu);
    }

(compare the code in gic_acknowledge_irq())

If you fix that, then
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM
Christoffer Dall Feb. 2, 2014, 10:53 p.m. UTC | #2
On Fri, Jan 31, 2014 at 06:33:25PM +0000, Peter Maydell wrote:
> On 28 January 2014 20:32, Christoffer Dall <christoffer.dall@linaro.org> wrote:
> > Right now the arm gic emulation doesn't keep track of the source of an
> > SGI (which apparently Linux guests don't use, or they're fine with
> > assuming CPU 0 always).
> >
> > Add the necessary matrix on the GICState structure and maintain the data
> > when setting and clearing the pending state of an IRQ and make the state
> > visible to the guest.
> >
> > Note that we always choose to present the source as the lowest-numbered
> > CPU in case multiple cores have signalled the same SGI number to a core
> > on the system.
> 
> > @@ -531,9 +576,29 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
> >                  GIC_CLEAR_EDGE_TRIGGER(irq + i);
> >              }
> >          }
> > -    } else {
> > +    } else if (offset < 0xf10) {
> >          /* 0xf00 is only handled for 32-bit writes.  */
> >          goto bad_reg;
> > +    } else if (offset < 0xf20) {
> > +        /* GICD_CPENDSGIRn */
> > +        if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
> > +            goto bad_reg;
> > +        }
> > +        irq = (offset - 0xf10);
> > +
> > +        GIC_CLEAR_PENDING(irq, 1 << cpu);
> > +        s->sgi_pending[irq][cpu] &= ~value;
> 
> This doesn't look quite right. If the SGI is pending
> from multiple source CPUs and we use CPENDSGIRn to
> clear the bits corresponding to only some of those
> source CPUs, then the interrupt as a whole should stay
> pending on this (target) CPU. I think this is:
> 
>     s->sgi_pending[irq][cpu] &= ~value;
>     if (s->sgi_pending[irq][cpu] == 0) {
>         GIC_CLEAR_PENDING(irq, 1 << cpu);
>     }

I had this vague feeling that it was too easy when I wrote the code,
nice catch!

> 
> (compare the code in gic_acknowledge_irq())
> 
> If you fix that, then
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> 

Thanks!
-Christoffer
diff mbox

Patch

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 5e2cf14..4054fb6 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -154,6 +154,8 @@  static void gic_set_irq(void *opaque, int irq, int level)
         target = cm;
     }
 
+    assert(irq >= GIC_NR_SGIS);
+
     if (level == GIC_TEST_LEVEL(irq, cm)) {
         return;
     }
@@ -180,22 +182,49 @@  static void gic_set_running_irq(GICState *s, int cpu, int irq)
 
 uint32_t gic_acknowledge_irq(GICState *s, int cpu)
 {
-    int new_irq;
+    int ret, irq, src;
     int cm = 1 << cpu;
-    new_irq = s->current_pending[cpu];
-    if (new_irq == 1023
-            || GIC_GET_PRIORITY(new_irq, cpu) >= s->running_priority[cpu]) {
+    irq = s->current_pending[cpu];
+    if (irq == 1023
+            || GIC_GET_PRIORITY(irq, cpu) >= s->running_priority[cpu]) {
         DPRINTF("ACK no pending IRQ\n");
         return 1023;
     }
-    s->last_active[new_irq][cpu] = s->running_irq[cpu];
+    s->last_active[irq][cpu] = s->running_irq[cpu];
 
-    cm = GIC_TEST_MODEL(new_irq) ? ALL_CPU_MASK : cm;
-    GIC_CLEAR_PENDING(new_irq, cm);
+    cm = GIC_TEST_MODEL(irq) ? ALL_CPU_MASK : cm;
+    if (s->revision == REV_11MPCORE) {
+        /* Clear pending flags for both level and edge triggered interrupts.
+         * Level triggered IRQs will be reasserted once they become inactive.
+         */
+        GIC_CLEAR_PENDING(irq, cm);
+        ret = irq;
+    } else {
+        if (irq < GIC_NR_SGIS) {
+            /* Lookup the source CPU for the SGI and clear this in the
+             * sgi_pending map.  Return the src and clear the overall pending
+             * state on this CPU if the SGI is not pending from any CPUs.
+             */
+            assert(s->sgi_pending[irq][cpu] != 0);
+            src = ctz32(s->sgi_pending[irq][cpu]);
+            s->sgi_pending[irq][cpu] &= ~(1 << src);
+            if (s->sgi_pending[irq][cpu] == 0) {
+                GIC_CLEAR_PENDING(irq, cm);
+            }
+            ret = irq | ((src & 0x7) << 10);
+        } else {
+            /* Clear pending state for both level and edge triggered
+             * interrupts. (level triggered interrupts with an active line
+             * remain pending, see gic_test_pending)
+             */
+            GIC_CLEAR_PENDING(irq, cm);
+            ret = irq;
+        }
+    }
 
-    gic_set_running_irq(s, cpu, new_irq);
-    DPRINTF("ACK %d\n", new_irq);
-    return new_irq;
+    gic_set_running_irq(s, cpu, irq);
+    DPRINTF("ACK %d\n", irq);
+    return ret;
 }
 
 void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val)
@@ -357,6 +386,22 @@  static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
             if (GIC_TEST_EDGE_TRIGGER(irq + i))
                 res |= (2 << (i * 2));
         }
+    } else if (offset < 0xf10) {
+        goto bad_reg;
+    } else if (offset < 0xf30) {
+        if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+            goto bad_reg;
+        }
+
+        if (offset < 0xf20) {
+            /* GICD_CPENDSGIRn */
+            irq = (offset - 0xf10);
+        } else {
+            irq = (offset - 0xf20);
+            /* GICD_SPENDSGIRn */
+        }
+
+        res = s->sgi_pending[irq][cpu];
     } else if (offset < 0xfe0) {
         goto bad_reg;
     } else /* offset >= 0xfe0 */ {
@@ -531,9 +576,29 @@  static void gic_dist_writeb(void *opaque, hwaddr offset,
                 GIC_CLEAR_EDGE_TRIGGER(irq + i);
             }
         }
-    } else {
+    } else if (offset < 0xf10) {
         /* 0xf00 is only handled for 32-bit writes.  */
         goto bad_reg;
+    } else if (offset < 0xf20) {
+        /* GICD_CPENDSGIRn */
+        if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+            goto bad_reg;
+        }
+        irq = (offset - 0xf10);
+
+        GIC_CLEAR_PENDING(irq, 1 << cpu);
+        s->sgi_pending[irq][cpu] &= ~value;
+    } else if (offset < 0xf30) {
+        /* GICD_SPENDSGIRn */
+        if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+            goto bad_reg;
+        }
+        irq = (offset - 0xf20);
+
+        GIC_SET_PENDING(irq, 1 << cpu);
+        s->sgi_pending[irq][cpu] |= value;
+    } else {
+        goto bad_reg;
     }
     gic_update(s);
     return;
@@ -557,6 +622,7 @@  static void gic_dist_writel(void *opaque, hwaddr offset,
         int cpu;
         int irq;
         int mask;
+        int target_cpu;
 
         cpu = gic_get_current_cpu(s);
         irq = value & 0x3ff;
@@ -576,6 +642,12 @@  static void gic_dist_writel(void *opaque, hwaddr offset,
             break;
         }
         GIC_SET_PENDING(irq, mask);
+        target_cpu = ctz32(mask);
+        while (target_cpu < GIC_NCPU) {
+            s->sgi_pending[irq][target_cpu] |= (1 << cpu);
+            mask &= ~(1 << target_cpu);
+            target_cpu = ctz32(mask);
+        }
         gic_update(s);
         return;
     }
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index e4fc650..92de7f8 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -58,8 +58,8 @@  static const VMStateDescription vmstate_gic_irq_state = {
 
 static const VMStateDescription vmstate_gic = {
     .name = "arm_gic",
-    .version_id = 4,
-    .minimum_version_id = 4,
+    .version_id = 5,
+    .minimum_version_id = 5,
     .pre_save = gic_pre_save,
     .post_load = gic_post_load,
     .fields = (VMStateField[]) {
@@ -71,6 +71,7 @@  static const VMStateDescription vmstate_gic = {
         VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL),
         VMSTATE_UINT16_2DARRAY(last_active, GICState, GIC_MAXIRQ, GIC_NCPU),
+        VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(running_irq, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU),
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index dbf8787..5dd826d 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -55,6 +55,13 @@  typedef struct GICState {
     uint8_t priority1[GIC_INTERNAL][GIC_NCPU];
     uint8_t priority2[GIC_MAXIRQ - GIC_INTERNAL];
     uint16_t last_active[GIC_MAXIRQ][GIC_NCPU];
+    /* For each SGI on the target CPU, we store 8 bits
+     * indicating which source CPUs have made this SGI
+     * pending on the target CPU. These correspond to
+     * the bytes in the GIC_SPENDSGIR* registers as
+     * read by the target CPU.
+     */
+    uint8_t sgi_pending[GIC_NR_SGIS][GIC_NCPU];
 
     uint16_t priority_mask[GIC_NCPU];
     uint16_t running_irq[GIC_NCPU];