diff mbox

[U-Boot,6/8] net: zynq_gem: Move RCLK details out of driver

Message ID 873d75dc332fc99f29761b5906426fed428da0ae.1390387843.git.michal.simek@xilinx.com
State Accepted
Delegated to: Michal Simek
Headers show

Commit Message

Michal Simek Jan. 22, 2014, 10:50 a.m. UTC 
From: Soren Brinkmann <soren.brinkmann@xilinx.com>

The GEM driver should not need to know about Zynq specific details of
RCLK related registers and bitfields in the SLCR. Move those details to
the slcr driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/cpu/armv7/zynq/slcr.c             | 6 +++---
 arch/arm/include/asm/arch-zynq/sys_proto.h | 2 +-
 drivers/net/zynq_gem.c                     | 7 ++-----
 3 files changed, 6 insertions(+), 9 deletions(-)

--
1.8.2.3
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index b4c11c3..6710d92 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -50,7 +50,7 @@  void zynq_slcr_cpu_reset(void)
 }

 /* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk)
 {
 	zynq_slcr_unlock();

@@ -63,12 +63,12 @@  void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
 		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
 		writel(clk, &slcr_base->gem1_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem1_rclk_ctrl);
+		writel(1, &slcr_base->gem1_rclk_ctrl);
 	} else {
 		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
 		writel(clk, &slcr_base->gem0_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem0_rclk_ctrl);
+		writel(1, &slcr_base->gem0_rclk_ctrl);
 	}
 	udelay(100000);
 out:
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 8f925af..a485d79 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -10,7 +10,7 @@ 
 extern void zynq_slcr_lock(void);
 extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk);
 extern void zynq_slcr_devcfg_disable(void);
 extern void zynq_slcr_devcfg_enable(void);
 extern u32 zynq_slcr_get_boot_mode(void);
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 6a017a8..53b7c6f 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -270,7 +270,7 @@  static int zynq_gem_setup_mac(struct eth_device *dev)

 static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 {
-	u32 i, rclk, clk = 0;
+	u32 i, clk = 0;
 	struct phy_device *phydev;
 	const u32 stat_size = (sizeof(struct zynq_gem_regs) -
 				offsetof(struct zynq_gem_regs, stat)) / 4;
@@ -343,17 +343,14 @@  static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	case SPEED_1000:
 		writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
 		       &regs->nwcfg);
-		rclk = (0 << 4) | (1 << 0);
 		clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
 		break;
 	case SPEED_100:
 		clrsetbits_le32(&regs->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
 				ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
-		rclk = 1 << 0;
 		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
 		break;
 	case SPEED_10:
-		rclk = 1 << 0;
 		/* FIXME untested */
 		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
 		break;
@@ -362,7 +359,7 @@  static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	/* Change the rclk and clk only not using EMIO interface */
 	if (!priv->emio)
 		zynq_slcr_gem_clk_setup(dev->iobase !=
-					ZYNQ_GEM_BASEADDR0, rclk, clk);
+					ZYNQ_GEM_BASEADDR0, clk);

 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
 					ZYNQ_GEM_NWCTRL_TXEN_MASK);