@@ -14,6 +14,36 @@ Optional properties:
- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
For hardwares which support disabling ramp rate, it should be explicitly
intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
+- regulator-valid-modes-mask: valid operations for regulator on particular machine
+ Supports following modes of operations:
+ Mode Description
+ ---- -----------
+ fast Regulator can handle fast changes in it's load
+ normal Normal regulator power supply mode
+ idle Regulator runs in a more efficient mode for light loads.
+ standby Regulator runs in the most efficient mode for very light loads
+ See the example given below.
+
+- regulator-initial-mode: default mode to set on startup
+ Refer to regulator-initial-mode for modes supported
+
+- regulator-initial-state: suspend state to set at init
+ Any one of the following states can be set:
+ Mode Description
+ ---- -----------
+ suspend-mem suspend to memory
+ suspend-standby standby mode
+ suspend-disk suspend to disk
+ See the example given below.
+
+- regulator-state-mem, regulator-state-disk, regulator-state-standby:
+ defines regulator suspend to memory, suspend to disk (hibernate) and standby respectively.
+ have following sub-constarints:
+ - regulator-state-uv: voltage to set in suspend state
+ - regulator-state-mode: suspend regulator operating mode,
+ refer to regulator-valid-modes-mask for modes supported
+ - regulator-state-enabled: is regulator enabled in this suspend state
+ - regulator-state-disabled: is the regulator disbled in this suspend state
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
@@ -29,6 +59,21 @@ Example:
regulator-max-microvolt = <2500000>;
regulator-always-on;
vin-supply = <&vin>;
+ regulator-initial-mode = "normal";
+ regulator-initial-state = "suspend-mem";
+ regulator-valid-modes-mask {
+ /*can support multiple mode
+ * in this example supporting fast and normal mode */
+ fast-mode;
+ normal-mode;
+ };
+ regulator-state-mem {
+ regulator-state-mode = "idle";
+ regulator-state-enabled;
+ };
+ regulator-state-disk {
+ regulator-state-disabled;
+ };
};
Regulator Consumers:
@@ -16,11 +16,36 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
+/**
+ * set_regulator_state_constraints - set regulator state for low power system states
+ * @np: device node for the low power regulator state
+ * @regulator_state: regulator_state structure need to be filled
+ */
+static void set_regulator_state_constraints(struct device_node *np,
+ struct regulator_state *state)
+{
+ of_property_read_u32(np, "regulator-state-uv", &state->uV);
+ if (!of_property_match_string(np, "regulator-state-mode", "fast"))
+ state->mode = REGULATOR_MODE_FAST;
+ else if (!of_property_match_string(np, "regulator-state-mode",
+ "normal"))
+ state->mode = REGULATOR_MODE_NORMAL;
+ else if (!of_property_match_string(np, "regulator-state-mode", "idle"))
+ state->mode = REGULATOR_MODE_IDLE;
+ else if (!of_property_match_string(np, "regulator-state-mode",
+ "standby"))
+ state->mode = REGULATOR_MODE_STANDBY;
+ state->enabled = of_property_read_bool(np, "regulator-state-enabled");
+ state->disabled = of_property_read_bool(np, "regulator-state-disabled");
+}
+
+
static void of_get_regulation_constraints(struct device_node *np,
struct regulator_init_data **init_data)
{
const __be32 *min_uV, *max_uV, *uV_offset;
const __be32 *min_uA, *max_uA, *ramp_delay;
+ struct device_node *state, *valid_modes;
struct property *prop;
struct regulation_constraints *constraints = &(*init_data)->constraints;
@@ -73,6 +98,58 @@ static void of_get_regulation_constraints(struct device_node *np,
else
constraints->ramp_disable = true;
}
+
+ valid_modes = of_find_node_by_name(np, "regulator-valid-modes-mask");
+ if (valid_modes) {
+ if (of_property_read_bool(valid_modes, "fast"))
+ constraints->valid_modes_mask = REGULATOR_MODE_FAST;
+ if (of_property_read_bool(valid_modes, "normal"))
+ constraints->valid_modes_mask |= REGULATOR_MODE_NORMAL;
+ if (of_property_read_bool(valid_modes, "idle"))
+ constraints->valid_modes_mask |= REGULATOR_MODE_IDLE;
+ if (of_property_read_bool(valid_modes, "standby"))
+ constraints->valid_modes_mask |= REGULATOR_MODE_STANDBY;
+ }
+
+ /* flag assignment for initial mode*/
+ if (!of_property_match_string(np, "regulator-initial-mode", "fast"))
+ constraints->initial_mode = REGULATOR_MODE_FAST;
+ else if (!of_property_match_string(np, "regulator-initial-mode",
+ "normal"))
+ constraints->initial_mode = REGULATOR_MODE_NORMAL;
+ else if (!of_property_match_string(np, "regulator-initial-mode",
+ "idle"))
+ constraints->initial_mode = REGULATOR_MODE_IDLE;
+ else if (!of_property_match_string(np, "regulator-initial-mode",
+ "standby"))
+ constraints->initial_mode = REGULATOR_MODE_STANDBY;
+
+ /* flag assignment for initial state*/
+ if (!of_property_match_string(np,
+ "regulator-initial-state", "suspend-mem"))
+ constraints->initial_state = PM_SUSPEND_MEM;
+ else if (!of_property_match_string(np,
+ "regulator-initial-state", "suspend-standby"))
+ constraints->initial_state = PM_SUSPEND_STANDBY;
+ else if (!of_property_match_string(np,
+ "regulator-initial-state", "suspend-disk"))
+ constraints->initial_state = PM_SUSPEND_MAX;
+
+ /* regulator state during low power system states */
+ state = of_find_node_by_name(np, "regulator-state-mem");
+ if (state)
+ set_regulator_state_constraints(state,
+ &constraints->state_mem);
+
+ state = of_find_node_by_name(np, "regulator-state-disk");
+ if (state)
+ set_regulator_state_constraints(state,
+ &constraints->state_disk);
+
+ state = of_find_node_by_name(np, "regulator-state-standby");
+ if (state)
+ set_regulator_state_constraints(state,
+ &constraints->state_standby);
}
/**
This patch adds support for parsing following regulator contraints from device tree blob. 1. valid modes mask (valid_modes_mask) 2. initial mode (initial_mode) 3. initial state (initial_state) 4. state mem (state_mem) 5. state disk (state_disk) 6. state standby (state_standby) Signed-off-by: Saurabh Singh Sengar <saurabh1.s@samsung.com> --- .../devicetree/bindings/regulator/regulator.txt | 45 ++++++++++++ drivers/regulator/of_regulator.c | 77 ++++++++++++++++++++ 2 files changed, 122 insertions(+), 0 deletions(-) -- 1.7.0.4