@@ -30,6 +30,10 @@ Required properties:
Optional properties:
- mac-address: 6 bytes, mac address
+- max-frame-size: Maximum frame size permitted. This parameter is useful
+ since different implementations of the Synopsys MAC may
+ have different FIFO sizes depending on the selections
+ made in Synopsys Core Consultant.
Examples:
@@ -40,5 +44,6 @@ Examples:
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
phy-mode = "gmii";
};
This change adds a parameter for the Synopsys 10/100/1000 stmmac Ethernet driver to configure the maximum frame size supported by the EMAC driver. Synopsys allows the FIFO sizes to be configured when the cores are built for a particular device, but do not provide a way for the driver to read information from the device about the maximum MTU size supported as limited by the device's FIFO size. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> --- V3: change snps,max-frame-size to max-frame-size V2: change snps,max-mtu to snps,max-frame-size --- Documentation/devicetree/bindings/net/stmmac.txt | 5 +++++ 1 file changed, 5 insertions(+)