Patchwork [net-next,7/8] qlcnic: Enable IPv6 LRO even if IP address is not programmed

login
register
mail settings
Submitter Shahed Shaikh
Date Jan. 10, 2014, 4:48 p.m.
Message ID <1389372539-13753-8-git-send-email-shahed.shaikh@qlogic.com>
Download mbox | patch
Permalink /patch/309349/
State Accepted
Delegated to: David Miller
Headers show

Comments

Shahed Shaikh - Jan. 10, 2014, 4:48 p.m.
From: Shahed Shaikh <shahed.shaikh@qlogic.com>

o Enabling BIT_9 while configuring hardware LRO allows adapter to
  perform LRO even if destination IP address is not programmed in adapter.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index e96b76d..6ca5e57 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -782,8 +782,8 @@  void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter)
 			"Could not send interrupt coalescing parameters\n");
 }
 
-#define QLCNIC_ENABLE_IPV4_LRO		1
-#define QLCNIC_ENABLE_IPV6_LRO		2
+#define QLCNIC_ENABLE_IPV4_LRO		BIT_0
+#define QLCNIC_ENABLE_IPV6_LRO		(BIT_1 | BIT_9)
 
 int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 {