Message ID | 1389264962-22858-3-git-send-email-rogerq@ti.com |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
On 09-01-2014 14:56, Roger Quadros wrote: > From: Balaji T K <balajitk@ti.com> > Some platforms have a PHY hooked up to the > SATA controller. The PHY needs to be initialized > and powered up for SATA to work. We do that > using the PHY framework. > [Roger Q] Cleaned up. > CC: Tejun Heo <tj@kernel.org> > Signed-off-by: Balaji T K <balajitk@ti.com> > Signed-off-by: Roger Quadros <rogerq@ti.com> [...] > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c > index d5ced13..b476642 100644 > --- a/drivers/ata/ahci_platform.c > +++ b/drivers/ata/ahci_platform.c > @@ -142,6 +142,39 @@ static int ahci_probe(struct platform_device *pdev) > } > } > > + hpriv->phy = devm_phy_get(dev, "sata-phy"); > + if (IS_ERR(hpriv->phy)) { > + rc = PTR_ERR(hpriv->phy); > + switch (rc) { > + case -ENODEV: > + case -ENOSYS: > + /* continue normally */ > + hpriv->phy = NULL; > + break; > + > + case -EPROBE_DEFER: > + goto disable_unprepare_clk; > + break; Well, well, *break* after *goto*? :-) > + > + default: > + dev_err(dev, "couldn't get sata-phy\n"); > + goto disable_unprepare_clk; > + break; Again? WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/09/2014 04:50 PM, Sergei Shtylyov wrote: > On 09-01-2014 14:56, Roger Quadros wrote: > >> From: Balaji T K <balajitk@ti.com> > >> Some platforms have a PHY hooked up to the >> SATA controller. The PHY needs to be initialized >> and powered up for SATA to work. We do that >> using the PHY framework. > >> [Roger Q] Cleaned up. > >> CC: Tejun Heo <tj@kernel.org> >> Signed-off-by: Balaji T K <balajitk@ti.com> >> Signed-off-by: Roger Quadros <rogerq@ti.com> > [...] > >> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c >> index d5ced13..b476642 100644 >> --- a/drivers/ata/ahci_platform.c >> +++ b/drivers/ata/ahci_platform.c >> @@ -142,6 +142,39 @@ static int ahci_probe(struct platform_device *pdev) >> } >> } >> >> + hpriv->phy = devm_phy_get(dev, "sata-phy"); >> + if (IS_ERR(hpriv->phy)) { >> + rc = PTR_ERR(hpriv->phy); >> + switch (rc) { >> + case -ENODEV: >> + case -ENOSYS: >> + /* continue normally */ >> + hpriv->phy = NULL; >> + break; >> + >> + case -EPROBE_DEFER: >> + goto disable_unprepare_clk; >> + break; > > Well, well, *break* after *goto*? :-) > I know it is pointless functionally, but it is just my preference aesthetically. Is it much of an issue if left as is? cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jan 09, 2014 at 05:07:29PM +0530, Roger Quadros wrote: > I know it is pointless functionally, but it is just my preference > aesthetically. > > Is it much of an issue if left as is? Yes.
On Thursday 09 January 2014 04:26 PM, Roger Quadros wrote: > From: Balaji T K <balajitk@ti.com> > > Some platforms have a PHY hooked up to the > SATA controller. The PHY needs to be initialized > and powered up for SATA to work. We do that > using the PHY framework. > > [Roger Q] Cleaned up. > > CC: Tejun Heo <tj@kernel.org> > Signed-off-by: Balaji T K <balajitk@ti.com> > Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/ata/ahci.h | 2 ++ > drivers/ata/ahci_platform.c | 46 ++++++++++++++++++++++++++++++++++++++++++++- > 2 files changed, 47 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h > index 2289efd..f9bbada 100644 > --- a/drivers/ata/ahci.h > +++ b/drivers/ata/ahci.h > @@ -37,6 +37,7 @@ > > #include <linux/clk.h> > #include <linux/libata.h> > +#include <linux/phy/phy.h> > > /* Enclosure Management Control */ > #define EM_CTRL_MSG_TYPE 0x000f0000 > @@ -322,6 +323,7 @@ struct ahci_host_priv { > u32 em_buf_sz; /* EM buffer size in byte */ > u32 em_msg_type; /* EM message type */ > struct clk *clk; /* Only for platforms supporting clk */ > + struct phy *phy; /* If platform uses phy */ > void *plat_data; /* Other platform data */ > }; > > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c > index d5ced13..b476642 100644 > --- a/drivers/ata/ahci_platform.c > +++ b/drivers/ata/ahci_platform.c > @@ -142,6 +142,39 @@ static int ahci_probe(struct platform_device *pdev) > } > } > > + hpriv->phy = devm_phy_get(dev, "sata-phy"); > + if (IS_ERR(hpriv->phy)) { > + rc = PTR_ERR(hpriv->phy); > + switch (rc) { > + case -ENODEV: > + case -ENOSYS: > + /* continue normally */ > + hpriv->phy = NULL; > + break; > + > + case -EPROBE_DEFER: > + goto disable_unprepare_clk; > + break; > + > + default: > + dev_err(dev, "couldn't get sata-phy\n"); > + goto disable_unprepare_clk; > + break; > + } > + } > + > + if (hpriv->phy) { > + rc = phy_init(hpriv->phy); > + if (rc) > + goto disable_unprepare_clk; > + > + rc = phy_power_on(hpriv->phy); > + if (rc) { > + phy_exit(hpriv->phy); > + goto disable_unprepare_clk; > + } > + } > + > /* > * Some platforms might need to prepare for mmio region access, > * which could be done in the following init call. So, the mmio > @@ -151,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev) > if (pdata && pdata->init) { > rc = pdata->init(dev, hpriv->mmio); > if (rc) > - goto disable_unprepare_clk; > + goto disable_phy; > } > > ahci_save_initial_config(dev, hpriv, > @@ -221,6 +254,12 @@ static int ahci_probe(struct platform_device *pdev) > pdata_exit: > if (pdata && pdata->exit) > pdata->exit(dev); > +disable_phy: > + if (hpriv->phy) { > + phy_power_off(hpriv->phy); > + phy_exit(hpriv->phy); > + } > + > disable_unprepare_clk: > if (!IS_ERR(hpriv->clk)) > clk_disable_unprepare(hpriv->clk); > @@ -239,6 +278,11 @@ static void ahci_host_stop(struct ata_host *host) > if (pdata && pdata->exit) > pdata->exit(dev); > > + if (hpriv->phy) { > + phy_power_off(hpriv->phy); > + phy_exit(hpriv->phy); > + } > + > if (!IS_ERR(hpriv->clk)) { > clk_disable_unprepare(hpriv->clk); > clk_put(hpriv->clk); > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/09/2014 05:00 PM, Tejun Heo wrote: > On Thu, Jan 09, 2014 at 05:07:29PM +0530, Roger Quadros wrote: >> I know it is pointless functionally, but it is just my preference >> aesthetically. >> >> Is it much of an issue if left as is? > > Yes. > OK. I'll send a v5. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 2289efd..f9bbada 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -37,6 +37,7 @@ #include <linux/clk.h> #include <linux/libata.h> +#include <linux/phy/phy.h> /* Enclosure Management Control */ #define EM_CTRL_MSG_TYPE 0x000f0000 @@ -322,6 +323,7 @@ struct ahci_host_priv { u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ struct clk *clk; /* Only for platforms supporting clk */ + struct phy *phy; /* If platform uses phy */ void *plat_data; /* Other platform data */ }; diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index d5ced13..b476642 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -142,6 +142,39 @@ static int ahci_probe(struct platform_device *pdev) } } + hpriv->phy = devm_phy_get(dev, "sata-phy"); + if (IS_ERR(hpriv->phy)) { + rc = PTR_ERR(hpriv->phy); + switch (rc) { + case -ENODEV: + case -ENOSYS: + /* continue normally */ + hpriv->phy = NULL; + break; + + case -EPROBE_DEFER: + goto disable_unprepare_clk; + break; + + default: + dev_err(dev, "couldn't get sata-phy\n"); + goto disable_unprepare_clk; + break; + } + } + + if (hpriv->phy) { + rc = phy_init(hpriv->phy); + if (rc) + goto disable_unprepare_clk; + + rc = phy_power_on(hpriv->phy); + if (rc) { + phy_exit(hpriv->phy); + goto disable_unprepare_clk; + } + } + /* * Some platforms might need to prepare for mmio region access, * which could be done in the following init call. So, the mmio @@ -151,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev) if (pdata && pdata->init) { rc = pdata->init(dev, hpriv->mmio); if (rc) - goto disable_unprepare_clk; + goto disable_phy; } ahci_save_initial_config(dev, hpriv, @@ -221,6 +254,12 @@ static int ahci_probe(struct platform_device *pdev) pdata_exit: if (pdata && pdata->exit) pdata->exit(dev); +disable_phy: + if (hpriv->phy) { + phy_power_off(hpriv->phy); + phy_exit(hpriv->phy); + } + disable_unprepare_clk: if (!IS_ERR(hpriv->clk)) clk_disable_unprepare(hpriv->clk); @@ -239,6 +278,11 @@ static void ahci_host_stop(struct ata_host *host) if (pdata && pdata->exit) pdata->exit(dev); + if (hpriv->phy) { + phy_power_off(hpriv->phy); + phy_exit(hpriv->phy); + } + if (!IS_ERR(hpriv->clk)) { clk_disable_unprepare(hpriv->clk); clk_put(hpriv->clk);