Patchwork PowerPC glibc patches

login
register
mail settings
Submitter Fernandes, Joao Moreira (EXT-Other PT/Amadora)
Date Dec. 31, 2013, 4:20 p.m.
Message ID <4aa29d48b1aa4a8b939b0ab2820b7228@DB3PR04MB218.eurprd04.prod.outlook.com>
Download mbox | patch
Permalink /patch/305898/
State Rejected, archived
Headers show

Comments

Yann,

Unfortunately I have to use Outlook (company policy...) and I'm
terrible with it, so sorry about the mess. I'm also unable to use
patchbomb in this setup, so I'm inlining the patch bellow.

Cheers,
João


exporting patch:
# HG changeset patch
# User João Fernandes <joao.m.fernandes.ext@coriant.com>
# Date 1388504699 0
#      Tue Dec 31 15:44:59 2013 +0000
# Node ID 655dd93187f312684df5172bbb82aa1c09db7417
# Parent  87ad9e82546df3ce0127d1046ec644b4486aa626
libc/glibc: various powerpc glibc fixes

While trying to build a toolchain for a PowerPC system with gcc 4.8.1,
binutils 2.22 and glibc 2.8, I faced some difficulties. Firstly, patch
glibc/2.9/600-recent-binutils.patch also had to be applied to glibc 2.8;
secondly, gcc 4.8 dropped -mnew-mnemonics/-mold-mnemonics options, so I had to
remove -mnew-mnemonics from sysdeps/powerpc/Makefile of all glibc
versions < 2.17 (this is safe as -mnew-mnemonics is gcc's default since the
early 90's); lastly, the patch from
https://sourceware.org/ml/crossgcc/2008-10/msg00010.html had to be applied.
This patch addresses all mentioned issues.

Signed-off-by: João Fernandes <joao.m.fernandes.ext@coriant.com>




-----Original Message-----
From: Yann E. MORIN [mailto:yann.morin.1998@gmail.com] On Behalf Of Yann E. MORIN

Sent: Friday, November 15, 2013 8:07 PM
To: Fernandes, Joao Moreira (EXT-Other PT/Amadora)
Cc: crossgcc@sourceware.org
Subject: Re: PowerPC glibc patches

João, All,

[Please, wrap your messages at ~75 cahrs, it is easier to read]

On 2013-10-14 12:46 +0000, Fernandes, Joao Moreira (EXT-Other PT/Amadora) spake thusly:
> While trying to build a toolchain for a PowerPC system with gcc 4.8.1,

> binutils 2.22 and glibc 2.8, I faced some difficulties. Firstly, patch

> glibc/2.9/600-recent-binutils.patch also had to be applied to glibc 2.8;

> secondly, gcc 4.8 dropped -mnew-mnemonics/-mold-mnemonics options, so I

> had to remove -mnew-mnemonics from sysdeps/powerpc/Makefile - this is

> safe as -mnew-mnemonics is gcc's default since the early 90's - and this

> applies to glibc versions < 2.17; lastly, the patch from

> https://sourceware.org/ml/crossgcc/2008-10/msg00010.html had to be applied.

> A set of patches addressing all these issues is attached.


Your patches are unusable because they are attached as base64-encoded
parts, which makes them unusable.

Please, have a look at:
    docs/7 - Contributing to crosstool-NG.txt
    docs/C - Misc. tutorials.txt

for example on how to ciontribute changes to crosstool-NG.

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
ANDY KENNEDY - Dec. 31, 2013, 5:59 p.m.
> -----Original Message-----

> From: crossgcc-owner@sourceware.org [mailto:crossgcc-owner@sourceware.org] On Behalf Of Fernandes,

> Joao Moreira (EXT-Other PT/Amadora)

> Sent: Tuesday, December 31, 2013 10:21 AM

> To: Yann E. MORIN

> Cc: crossgcc@sourceware.org

> Subject: RE: PowerPC glibc patches

> 

> Yann,

> 

> Unfortunately I have to use Outlook (company policy...) and I'm

> terrible with it, so sorry about the mess. I'm also unable to use

> patchbomb in this setup, so I'm inlining the patch bellow.


I'm in the same boat here.

Some tips:

1) Make all your mail be done it PLAIN TEXT (there are three locations
where you have to change this).

2) Download VIM for Windoze.

3) When you go to add a patch, make the patch in your Linux box, open it
via VIM on Winders and copy and paste it into the e-mail (this will
preserve your lines, tabs, and any other of the like).

4) Set your line breaks in LookOut! to some REALLY LARGE number (I have
mine set to 150), then you'll need something like this:
123456789012345678901234567890123456789012345678901234567890123456789012
to know where to break the lines.

5) When you put that line in the text, make sure you delete it before
you send the mail, or you feel real stupid when you see it in your
e-mail (voice of experience).

Good Luck!
Bryan Hundven - Dec. 4, 2014, 11:55 p.m.
Joao,

As per: https://sourceware.org/ml/crossgcc/2014-12/msg00007.html

I cc'd you to this announcement, but your email address bounced.
I'm nicely setting the state to "rejected" and archiving the patch in
patchwork: https://patchwork.ozlabs.org/patch/305898/

Anyone is welcome to sponsor, update, and resend the patch. Please do
reference the original patch in patchwork if you do.

Cheers,

-Bryan

On Tue, Dec 31, 2013 at 8:20 AM, Fernandes, Joao Moreira (EXT-Other
PT/Amadora) <Joao.M.Fernandes.ext@coriant.com> wrote:
> Yann,
>
> Unfortunately I have to use Outlook (company policy...) and I'm
> terrible with it, so sorry about the mess. I'm also unable to use
> patchbomb in this setup, so I'm inlining the patch bellow.
>
> Cheers,
> João
>
>
> exporting patch:
> # HG changeset patch
> # User João Fernandes <joao.m.fernandes.ext@coriant.com>
> # Date 1388504699 0
> #      Tue Dec 31 15:44:59 2013 +0000
> # Node ID 655dd93187f312684df5172bbb82aa1c09db7417
> # Parent  87ad9e82546df3ce0127d1046ec644b4486aa626
> libc/glibc: various powerpc glibc fixes
>
> While trying to build a toolchain for a PowerPC system with gcc 4.8.1,
> binutils 2.22 and glibc 2.8, I faced some difficulties. Firstly, patch
> glibc/2.9/600-recent-binutils.patch also had to be applied to glibc 2.8;
> secondly, gcc 4.8 dropped -mnew-mnemonics/-mold-mnemonics options, so I had to
> remove -mnew-mnemonics from sysdeps/powerpc/Makefile of all glibc
> versions < 2.17 (this is safe as -mnew-mnemonics is gcc's default since the
> early 90's); lastly, the patch from
> https://sourceware.org/ml/crossgcc/2008-10/msg00010.html had to be applied.
> This patch addresses all mentioned issues.
>
> Signed-off-by: João Fernandes <joao.m.fernandes.ext@coriant.com>
>
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.10.1/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.10.1/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.11.1/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.11.1/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.11/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.11/100-powerpc-no_new_mnemonics.patch     Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.12.1/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.12.1/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.12.2/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.12.2/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.13/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.13/100-powerpc-no_new_mnemonics.patch     Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.14.1/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.14.1/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.14/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.14/100-powerpc-no_new_mnemonics.patch     Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.15/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.15/100-powerpc-no_new_mnemonics.patch     Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.16.0/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.16.0/100-powerpc-no_new_mnemonics.patch   Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/100-powerpc-no_new_mnemonics.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.8/100-powerpc-no_new_mnemonics.patch      Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,10 @@
> +--- glibc-2.8-ori/sysdeps/powerpc/Makefile     2013-10-14 10:06:43.466677702 +0100
> ++++ glibc-2.8/sysdeps/powerpc/Makefile 2013-10-14 10:12:20.932351104 +0100
> +@@ -1,7 +1,3 @@
> +-# We always want to use the new mnemonic syntax even if we are on a RS6000
> +-# machine.
> +-+cflags += -mnew-mnemonics
> +-
> + ifeq ($(subdir),gmon)
> + sysdep_routines += ppc-mcount
> + endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/110-powerpc-nptl_guard_sym.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.8/110-powerpc-nptl_guard_sym.patch        Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,9 @@
> +--- glibc-2.8-ori/nptl/sysdeps/powerpc/tcb-offsets.sym 2013-10-14 10:06:43.566678198 +0100
> ++++ glibc-2.8/nptl/sysdeps/powerpc/tcb-offsets.sym     2013-10-14 10:37:58.331974657 +0100
> +@@ -15,4 +15,6 @@
> + PID                           thread_offsetof (pid)
> + TID                           thread_offsetof (tid)
> + POINTER_GUARD                 (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
> ++#ifndef __ASSUME_PRIVATE_FUTEX
> + PRIVATE_FUTEX_OFFSET          thread_offsetof (header.private_futex)
> ++#endif
> diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/600-recent-binutils.patch
> --- /dev/null   Thu Jan 01 00:00:00 1970 +0000
> +++ b/glibc/2.8/600-recent-binutils.patch       Tue Dec 31 15:44:59 2013 +0000
> @@ -0,0 +1,37 @@
> +diff -durN glibc-2.9.orig/configure glibc-2.9/configure
> +--- glibc-2.9.orig/configure   2010-05-18 23:47:23.000000000 +0200
> ++++ glibc-2.9/configure        2010-05-18 23:50:04.000000000 +0200
> +@@ -4534,7 +4534,7 @@
> +   ac_prog_version=`$AS --version 2>&1 | sed -n 's/^.*GNU assembler.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
> +   case $ac_prog_version in
> +     '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
> +-    2.1[3-9]*)
> ++    2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*)
> +        ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
> +     *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
> +
> +@@ -4597,7 +4597,7 @@
> +   ac_prog_version=`$LD --version 2>&1 | sed -n 's/^.*GNU ld.* \([0-9][0-9]*\.[0-9.]*\).*$/\1/p'`
> +   case $ac_prog_version in
> +     '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
> +-    2.1[3-9]*)
> ++    2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*)
> +        ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
> +     *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
> +
> +diff -durN glibc-2.9.orig/configure.in glibc-2.9/configure.in
> +--- glibc-2.9.orig/configure.in        2010-05-18 23:47:23.000000000 +0200
> ++++ glibc-2.9/configure.in     2010-05-18 23:51:25.000000000 +0200
> +@@ -844,10 +844,10 @@
> + # Accept binutils 2.13 or newer.
> + AC_CHECK_PROG_VER(AS, $AS, --version,
> +                 [GNU assembler.* \([0-9]*\.[0-9.]*\)],
> +-                [2.1[3-9]*], AS=: critic_missing="$critic_missing as")
> ++                [2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*], AS=: critic_missing="$critic_missing as")
> + AC_CHECK_PROG_VER(LD, $LD, --version,
> +                 [GNU ld.* \([0-9][0-9]*\.[0-9.]*\)],
> +-                [2.1[3-9]*], LD=: critic_missing="$critic_missing ld")
> ++                [2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*], LD=: critic_missing="$critic_missing ld")
> +
> + # We need the physical current working directory.  We cannot use the
> + # "pwd -P" shell builtin since that's not portable.  Instead we try to
>
>
> -----Original Message-----
> From: Yann E. MORIN [mailto:yann.morin.1998@gmail.com] On Behalf Of Yann E. MORIN
> Sent: Friday, November 15, 2013 8:07 PM
> To: Fernandes, Joao Moreira (EXT-Other PT/Amadora)
> Cc: crossgcc@sourceware.org
> Subject: Re: PowerPC glibc patches
>
> João, All,
>
> [Please, wrap your messages at ~75 cahrs, it is easier to read]
>
> On 2013-10-14 12:46 +0000, Fernandes, Joao Moreira (EXT-Other PT/Amadora) spake thusly:
>> While trying to build a toolchain for a PowerPC system with gcc 4.8.1,
>> binutils 2.22 and glibc 2.8, I faced some difficulties. Firstly, patch
>> glibc/2.9/600-recent-binutils.patch also had to be applied to glibc 2.8;
>> secondly, gcc 4.8 dropped -mnew-mnemonics/-mold-mnemonics options, so I
>> had to remove -mnew-mnemonics from sysdeps/powerpc/Makefile - this is
>> safe as -mnew-mnemonics is gcc's default since the early 90's - and this
>> applies to glibc versions < 2.17; lastly, the patch from
>> https://sourceware.org/ml/crossgcc/2008-10/msg00010.html had to be applied.
>> A set of patches addressing all these issues is attached.
>
> Your patches are unusable because they are attached as base64-encoded
> parts, which makes them unusable.
>
> Please, have a look at:
>     docs/7 - Contributing to crosstool-NG.txt
>     docs/C - Misc. tutorials.txt
>
> for example on how to ciontribute changes to crosstool-NG.
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Patch

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.10.1/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.10.1/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.11.1/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.11.1/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.11/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.11/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.12.1/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.12.1/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.12.2/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.12.2/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.13/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.13/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.14.1/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.14.1/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.14/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.14/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.15/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.15/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.16.0/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.16.0/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/100-powerpc-no_new_mnemonics.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.8/100-powerpc-no_new_mnemonics.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,10 @@ 

+--- glibc-2.8-ori/sysdeps/powerpc/Makefile	2013-10-14 10:06:43.466677702 +0100

++++ glibc-2.8/sysdeps/powerpc/Makefile	2013-10-14 10:12:20.932351104 +0100

+@@ -1,7 +1,3 @@

+-# We always want to use the new mnemonic syntax even if we are on a RS6000

+-# machine.

+-+cflags += -mnew-mnemonics

+-

+ ifeq ($(subdir),gmon)

+ sysdep_routines += ppc-mcount

+ endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/110-powerpc-nptl_guard_sym.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.8/110-powerpc-nptl_guard_sym.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,9 @@ 

+--- glibc-2.8-ori/nptl/sysdeps/powerpc/tcb-offsets.sym	2013-10-14 10:06:43.566678198 +0100

++++ glibc-2.8/nptl/sysdeps/powerpc/tcb-offsets.sym	2013-10-14 10:37:58.331974657 +0100

+@@ -15,4 +15,6 @@

+ PID				thread_offsetof (pid)

+ TID				thread_offsetof (tid)

+ POINTER_GUARD			(offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t))

++#ifndef __ASSUME_PRIVATE_FUTEX

+ PRIVATE_FUTEX_OFFSET		thread_offsetof (header.private_futex)

++#endif

diff -r 87ad9e82546d -r 655dd93187f3 glibc/2.8/600-recent-binutils.patch

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000

+++ b/glibc/2.8/600-recent-binutils.patch	Tue Dec 31 15:44:59 2013 +0000

@@ -0,0 +1,37 @@ 

+diff -durN glibc-2.9.orig/configure glibc-2.9/configure

+--- glibc-2.9.orig/configure	2010-05-18 23:47:23.000000000 +0200

++++ glibc-2.9/configure	2010-05-18 23:50:04.000000000 +0200

+@@ -4534,7 +4534,7 @@

+   ac_prog_version=`$AS --version 2>&1 | sed -n 's/^.*GNU assembler.* \([0-9]*\.[0-9.]*\).*$/\1/p'`

+   case $ac_prog_version in

+     '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;

+-    2.1[3-9]*)

++    2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*)

+        ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;

+     *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;

+ 

+@@ -4597,7 +4597,7 @@

+   ac_prog_version=`$LD --version 2>&1 | sed -n 's/^.*GNU ld.* \([0-9][0-9]*\.[0-9.]*\).*$/\1/p'`

+   case $ac_prog_version in

+     '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;

+-    2.1[3-9]*)

++    2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*)

+        ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;

+     *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;

+ 

+diff -durN glibc-2.9.orig/configure.in glibc-2.9/configure.in

+--- glibc-2.9.orig/configure.in	2010-05-18 23:47:23.000000000 +0200

++++ glibc-2.9/configure.in	2010-05-18 23:51:25.000000000 +0200

+@@ -844,10 +844,10 @@

+ # Accept binutils 2.13 or newer.

+ AC_CHECK_PROG_VER(AS, $AS, --version,

+ 		  [GNU assembler.* \([0-9]*\.[0-9.]*\)],

+-		  [2.1[3-9]*], AS=: critic_missing="$critic_missing as")

++		  [2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*], AS=: critic_missing="$critic_missing as")

+ AC_CHECK_PROG_VER(LD, $LD, --version,

+ 		  [GNU ld.* \([0-9][0-9]*\.[0-9.]*\)],

+-		  [2.1[3-9]*], LD=: critic_missing="$critic_missing ld")

++		  [2.1[3-9]*|2.1[0-9][0-9]*|2.[2-9][0-9]*|[3-9].*|[1-9][0-9]*], LD=: critic_missing="$critic_missing ld")

+ 

+ # We need the physical current working directory.  We cannot use the

+ # "pwd -P" shell builtin since that's not portable.  Instead we try to