@@ -490,10 +490,21 @@
reg = <0xa0000 0x2400>;
interrupts = <62>;
clocks = <&gate_clk 3>;
+ phys = <&sata_phy0>;
+ phy-names = "port0";
nr-ports = <1>;
status = "disabled";
};
+ sata_phy0: sata-phy@a2000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0xa2000 0x0334>;
+ clocks = <&gate_clk 3>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
@@ -89,6 +89,8 @@
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "port0", "port1";
status = "disabled";
};
@@ -117,6 +117,8 @@
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "port0", "port1";
status = "disabled";
};
@@ -282,5 +282,23 @@
/* set phy-handle property in board file */
};
};
+
+ sata_phy0: sata-phy@82000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x82000 0x0334>;
+ clocks = <&gate_clk 14>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
+ sata_phy1: sata-phy@84000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x84000 0x0334>;
+ clocks = <&gate_clk 15>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
};
};
Add nodes for the two SATA PHYs on kirkwood. Add node for the one SATA PHY on Dove. Add pHandles to the PHYs in the sata nodes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v1->v2: sata_phy@... ->sata-phy@ value after '@' matching the first address in the reg. v2->v3: "0" -> "port0", etc. kirkewood -> kirkwood --- arch/arm/boot/dts/dove.dtsi | 11 +++++++++++ arch/arm/boot/dts/kirkwood-6281.dtsi | 2 ++ arch/arm/boot/dts/kirkwood-6282.dtsi | 2 ++ arch/arm/boot/dts/kirkwood.dtsi | 18 ++++++++++++++++++ 4 files changed, 33 insertions(+)