Message ID | 1388076695-28174-3-git-send-email-festevam@gmail.com |
---|---|
State | Accepted |
Delegated to: | Stefano Babic |
Headers | show |
On 26/12/2013 17:51, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@freescale.com> > > mx6 datasheet specifies that the minimum VDDSOC at 792 MHz is 1.15 V. > Add a 25 mV margin and set it to 1.175V. > > This also matches the VDDSOC voltages for 792MHz operation that the kernel configures: > http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/cpu_op-mx6.c?h=imx_3.0.35_4.1.0 > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 13b9e36..0136eb0 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -151,7 +151,7 @@ int arch_cpu_init(void) { init_aips(); - set_vddsoc(1200); /* Set VDDSOC to 1.2V */ + set_vddsoc(1175); /* Set VDDSOC to 1.175V */ imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */