new file mode 100755
@@ -0,0 +1,239 @@
+#!/bin/bash
+#
+# Test case for the QMP blkdebug and blkverify interfaces
+#
+# Copyright (C) 2013 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=mreitz@redhat.com
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+here="$PWD"
+tmp=/tmp/$$
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt generic
+_supported_proto generic
+_supported_os Linux
+
+function do_run_qemu()
+{
+ echo Testing: "$@" | _filter_imgfmt
+ $QEMU -nographic -qmp stdio -serial none "$@"
+ echo
+}
+
+function run_qemu()
+{
+ do_run_qemu "$@" 2>&1 | _filter_testdir | _filter_qmp | _filter_qemu_io
+}
+
+IMG_SIZE=64M
+
+echo
+echo "=== Testing blkverify through filename ==="
+echo
+
+TEST_IMG="$TEST_IMG.base" IMGOPTS="" IMGFMT="raw" _make_test_img $IMG_SIZE |\
+ _filter_imgfmt
+_make_test_img $IMG_SIZE
+$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
+ -c 'read 0 512' -c 'write -P 42 0x38000 512' -c 'read -P 42 0x38000 512' | _filter_qemu_io
+
+$QEMU_IO -c 'write -P 42 0 512' "$TEST_IMG" | _filter_qemu_io
+
+$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
+ -c 'read -P 42 0 512' | _filter_qemu_io
+
+echo
+echo "=== Testing blkverify through file blockref ==="
+echo
+
+TEST_IMG="$TEST_IMG.base" IMGOPTS="" IMGFMT="raw" _make_test_img $IMG_SIZE |\
+ _filter_imgfmt
+_make_test_img $IMG_SIZE
+$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base,file.test.driver=$IMGFMT,file.test.file.filename=$TEST_IMG" \
+ -c 'read 0 512' -c 'write -P 42 0x38000 512' -c 'read -P 42 0x38000 512' | _filter_qemu_io
+
+$QEMU_IO -c 'write -P 42 0 512' "$TEST_IMG" | _filter_qemu_io
+
+$QEMU_IO -c "open -o file.driver=blkverify,file.raw.filename=$TEST_IMG.base $TEST_IMG" \
+ -c 'read -P 42 0 512' | _filter_qemu_io
+
+echo
+echo "=== Testing blkdebug through filename ==="
+echo
+
+$QEMU_IO -c "open -o file.driver=blkdebug,file.inject-error.event=l2_load $TEST_IMG" \
+ -c 'read -P 42 0x38000 512'
+
+echo
+echo "=== Testing blkdebug through file blockref ==="
+echo
+
+$QEMU_IO -c "open -o driver=$IMGFMT,file.driver=blkdebug,file.inject-error.event=l2_load,file.image.filename=$TEST_IMG" \
+ -c 'read -P 42 0x38000 512'
+
+echo
+echo "=== Testing blkdebug on existing block device ==="
+echo
+
+run_qemu -drive "file=$TEST_IMG,format=raw,if=none,id=drive0" <<EOF
+{ "execute": "qmp_capabilities" }
+{ "execute": "blockdev-add",
+ "arguments": {
+ "options": {
+ "driver": "$IMGFMT",
+ "id": "drive0-debug",
+ "file": {
+ "driver": "blkdebug",
+ "image": "drive0",
+ "inject-error": [{
+ "event": "l2_load"
+ }]
+ }
+ }
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-debug "read 0 512"'
+ }
+}
+{ "execute": "quit" }
+EOF
+
+echo
+echo "=== Testing blkverify on existing block device ==="
+echo
+
+run_qemu -drive "file=$TEST_IMG,format=$IMGFMT,if=none,id=drive0" <<EOF
+{ "execute": "qmp_capabilities" }
+{ "execute": "blockdev-add",
+ "arguments": {
+ "options": {
+ "driver": "blkverify",
+ "id": "drive0-verify",
+ "test": "drive0",
+ "raw": {
+ "driver": "raw",
+ "file": {
+ "driver": "file",
+ "filename": "$TEST_IMG.base"
+ }
+ }
+ }
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-verify "read 0 512"'
+ }
+}
+{ "execute": "quit" }
+EOF
+
+echo
+echo "=== Testing blkverify on existing raw block device ==="
+echo
+
+run_qemu -drive "file=$TEST_IMG.base,if=none,id=drive0" <<EOF
+{ "execute": "qmp_capabilities" }
+{ "execute": "blockdev-add",
+ "arguments": {
+ "options": {
+ "driver": "blkverify",
+ "id": "drive0-verify",
+ "test": {
+ "driver": "$IMGFMT",
+ "file": {
+ "driver": "file",
+ "filename": "$TEST_IMG"
+ }
+ },
+ "raw": "drive0"
+ }
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-verify "read 0 512"'
+ }
+}
+{ "execute": "quit" }
+EOF
+
+echo
+echo "=== Testing blkdebug's set-state through QMP ==="
+echo
+
+run_qemu -drive "file=$TEST_IMG,format=raw,if=none,id=drive0" <<EOF
+{ "execute": "qmp_capabilities" }
+{ "execute": "blockdev-add",
+ "arguments": {
+ "options": {
+ "driver": "$IMGFMT",
+ "id": "drive0-debug",
+ "file": {
+ "driver": "blkdebug",
+ "image": "drive0",
+ "inject-error": [{
+ "event": "read_aio",
+ "state": 42
+ }],
+ "set-state": [{
+ "event": "write_aio",
+ "new_state": 42
+ }]
+ }
+ }
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-debug "read 0 512"'
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-debug "write 0 512"'
+ }
+}
+{ "execute": "human-monitor-command",
+ "arguments": {
+ "command-line": 'qemu-io drive0-debug "read 0 512"'
+ }
+}
+{ "execute": "quit" }
+EOF
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
new file mode 100644
@@ -0,0 +1,90 @@
+QA output created by 071
+
+=== Testing blkverify through filename ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+read 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 229376
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 512/512 bytes at offset 229376
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+blkverify: read sector_num=0 nb_sectors=4 contents mismatch in sector 0
+
+=== Testing blkverify through file blockref ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+read 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 229376
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 512/512 bytes at offset 229376
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+blkverify: read sector_num=0 nb_sectors=4 contents mismatch in sector 0
+
+=== Testing blkdebug through filename ===
+
+read failed: Input/output error
+
+=== Testing blkdebug through file blockref ===
+
+read failed: Input/output error
+
+=== Testing blkdebug on existing block device ===
+
+Testing: -drive file=TEST_DIR/t.IMGFMT,format=raw,if=none,id=drive0
+QMP_VERSION
+{"return": {}}
+{"return": {}}
+read failed: Input/output error
+{"return": ""}
+{"return": {}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN"}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "ide1-cd0", "tray-open": true}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "floppy0", "tray-open": true}}
+
+
+=== Testing blkverify on existing block device ===
+
+Testing: -drive file=TEST_DIR/t.IMGFMT,format=IMGFMT,if=none,id=drive0
+QMP_VERSION
+{"return": {}}
+{"return": {}}
+blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
+
+
+=== Testing blkverify on existing raw block device ===
+
+Testing: -drive file=TEST_DIR/t.IMGFMT.base,if=none,id=drive0
+QMP_VERSION
+{"return": {}}
+{"return": {}}
+blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
+
+
+=== Testing blkdebug's set-state through QMP ===
+
+Testing: -drive file=TEST_DIR/t.IMGFMT,format=raw,if=none,id=drive0
+QMP_VERSION
+{"return": {}}
+{"return": {}}
+read 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+{"return": ""}
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+{"return": ""}
+read failed: Input/output error
+{"return": ""}
+{"return": {}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN"}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "ide1-cd0", "tray-open": true}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "floppy0", "tray-open": true}}
+
+*** done
@@ -77,5 +77,6 @@
068 rw auto
069 rw auto
070 rw auto
+071 rw auto
073 rw auto
074 rw auto
Add a test for the new blkdebug/blkverify interface. This test is not written in Python, although it uses QMP. This is because it invokes the qemu-io HMP command, which outputs errors to stderr instead of returning them through QMP. Filtering and testing that output is easier in a shell script than with the Python infrastructure. Signed-off-by: Max Reitz <mreitz@redhat.com> --- tests/qemu-iotests/071 | 239 +++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/071.out | 90 +++++++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 330 insertions(+) create mode 100755 tests/qemu-iotests/071 create mode 100644 tests/qemu-iotests/071.out