| Message ID | 1387311713-1926-1-git-send-email-andrew@lunn.ch |
|---|---|
| State | Not Applicable |
| Delegated to: | David Miller |
| Headers | show |
Hi Folks
Sorry, forgot the --subject. This is version 3 of the patchset.
Andrew
On Tue, Dec 17, 2013 at 09:21:49PM +0100, Andrew Lunn wrote:
> Describe the binding for the Marvell MVEBU SATA phy. This driver
> can be used at least with Kirkwood, Dove and maybe others.
> Additionally, update the SATA binding with the properties to link
> to the phy nodes.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> v1->v2:
> Correct #phy-cells
> Correct number after @ to match first reg address.
> Rename to phy-mvebu.txt
>
> v2->v3:
> Renamed to mvebu-phy.txt
> Use "port0", "port1" instead of "0", "1"
> ---
> Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++
> .../devicetree/bindings/phy/mvebu-phy.txt | 22 ++++++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
> index b5cdd20cde9c..4c5447f1068d 100644
> --- a/Documentation/devicetree/bindings/ata/marvell.txt
> +++ b/Documentation/devicetree/bindings/ata/marvell.txt
> @@ -6,11 +6,17 @@ Required Properties:
> - interrupts : Interrupt controller is using
> - nr-ports : Number of SATA ports in use.
>
> +Optional Properties:
> +- phys : List of phandles to sata phys
> +- phy-names : Should be "port0", "port1", etc, one per phandle
> +
> Example:
>
> sata@80000 {
> compatible = "marvell,orion-sata";
> reg = <0x80000 0x5000>;
> interrupts = <21>;
> + phys = <&sata_phy0>, <&sata_phy1>;
> + phy-names = "port0", "port1";
> nr-ports = <2>;
> }
> diff --git a/Documentation/devicetree/bindings/phy/mvebu-phy.txt b/Documentation/devicetree/bindings/phy/mvebu-phy.txt
> new file mode 100644
> index 000000000000..6cb3364aeafb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mvebu-phy.txt
> @@ -0,0 +1,22 @@
> +* Marvell MVEBU SATA PHY
> +
> +Power control for the SATA phy found on Marvell MVEBU SoCs.
> +
> +This document extends the binding described in phy-bindings.txt
> +
> +Required properties :
> +
> + - reg : Offset and length of the register set for the SATA device
> + - compatible : Should be "marvell,mvebu-sata-phy"
> + - clocks : phandle of clock and specifier that supplies the device
> + - clock-names : Should be "sata"
> +
> +Example:
> + sata-phy@84000 {
> + compatible = "marvell,mvebu-sata-phy";
> + reg = <0x84000 0x0334>;
> + clocks = <&gate_clk 15>;
> + clock-names = "sata";
> + #phy-cells = <0>;
> + status = "ok";
> + };
> --
> 1.8.5.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 17, 2013 at 09:21:49PM +0100, Andrew Lunn wrote: > Describe the binding for the Marvell MVEBU SATA phy. This driver > can be used at least with Kirkwood, Dove and maybe others. > Additionally, update the SATA binding with the properties to link > to the phy nodes. > > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > --- > v1->v2: > Correct #phy-cells > Correct number after @ to match first reg address. > Rename to phy-mvebu.txt > > v2->v3: > Renamed to mvebu-phy.txt > Use "port0", "port1" instead of "0", "1" > --- > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ > .../devicetree/bindings/phy/mvebu-phy.txt | 22 ++++++++++++++++++++++ > 2 files changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt Acked-by: Jason Cooper <jason@lakedaemon.net> thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt index b5cdd20cde9c..4c5447f1068d 100644 --- a/Documentation/devicetree/bindings/ata/marvell.txt +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -6,11 +6,17 @@ Required Properties: - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use. +Optional Properties: +- phys : List of phandles to sata phys +- phy-names : Should be "port0", "port1", etc, one per phandle + Example: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; nr-ports = <2>; } diff --git a/Documentation/devicetree/bindings/phy/mvebu-phy.txt b/Documentation/devicetree/bindings/phy/mvebu-phy.txt new file mode 100644 index 000000000000..6cb3364aeafb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mvebu-phy.txt @@ -0,0 +1,22 @@ +* Marvell MVEBU SATA PHY + +Power control for the SATA phy found on Marvell MVEBU SoCs. + +This document extends the binding described in phy-bindings.txt + +Required properties : + + - reg : Offset and length of the register set for the SATA device + - compatible : Should be "marvell,mvebu-sata-phy" + - clocks : phandle of clock and specifier that supplies the device + - clock-names : Should be "sata" + +Example: + sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + };
Describe the binding for the Marvell MVEBU SATA phy. This driver can be used at least with Kirkwood, Dove and maybe others. Additionally, update the SATA binding with the properties to link to the phy nodes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v1->v2: Correct #phy-cells Correct number after @ to match first reg address. Rename to phy-mvebu.txt v2->v3: Renamed to mvebu-phy.txt Use "port0", "port1" instead of "0", "1" --- Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ .../devicetree/bindings/phy/mvebu-phy.txt | 22 ++++++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt