@@ -5,6 +5,8 @@ Driver bindings for the PXA MCI (MMC/SDIO) interfaces
Required properties:
- compatible: Should be "marvell,pxa-mmc".
- vmmc-supply: A regulator for VMMC
+- dmas: Should be DMA specifiers for RX and TX
+- dma-names: Should be "rx" and "tx"
Optional properties:
- marvell,detect-delay-ms: sets the detection delay timeout in ms.
@@ -21,5 +23,8 @@ mmc0: mmc@41100000 {
interrupts = <23>;
cd-gpios = <&gpio 23 0>;
wp-gpios = <&gpio 24 0>;
+ dmas = <&dma 21
+ &dma 22>;
+ dma-names = "rx", "tx";
};
@@ -11,10 +11,24 @@
marvell,intc-nr-irqs = <34>;
};
+ dma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ };
+
gpio: gpio@40e00000 {
compatible = "intel,pxa27x-gpio";
interrupts = <8>, <9>, <10>;
interrupt-names = "gpio0", "gpio1", "gpio_mux";
};
+
+ mmc@41100000 {
+ dmas = <&dma 21
+ &dma 22>;
+ dma-names = "rx", "tx";
+ };
};
};
Non-dts implementation supply required DMA channel numbers as IORESOURCE_DMA. We can also get them from the device tree, if it is present. This patch updates device tree with the proper dmaengine-based "marvell,pdma-1.0" DMA. There is no actual data handling in this patch, because the existing driver cannot get DMA channel number from dmaengine API. The patch in the series will provide temporary workaround by manually parsing node attributes, until Daniel's series is ready to be merged. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Daniel Mack <zonque@gmail.com> CC: Arnd Bergmann <arnd@arndb.de> --- v2..v3 * split into good (this one) and temporary (PATCH 07/21) parts v1..v2 * add binding for next-gen dma controller * use correct dma declararion * number changed from 5 to 3 Documentation/devicetree/bindings/mmc/pxa-mmc.txt | 5 +++++ arch/arm/boot/dts/pxa27x.dtsi | 14 ++++++++++++++ 2 files changed, 19 insertions(+)