[7/8] b44: do not set PHY address to 30 for every ext PHY

Submitted by Hauke Mehrtens on Dec. 15, 2013, 6:42 p.m.

Details

Message ID 1387132925-18651-8-git-send-email-hauke@hauke-m.de
State Changes Requested
Delegated to: David Miller
Headers show

Commit Message

Hauke Mehrtens Dec. 15, 2013, 6:42 p.m.
b44_phy_reset() will fail for an external PHY and only work with the
internal PHY, this was an old workaround when the detection of an
external switch based on the PHY address failed and it is not needed
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 drivers/net/ethernet/broadcom/b44.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 7f243aa..b65a463 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2415,8 +2415,11 @@  static int b44_init_one(struct ssb_device *sdev,
 	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
 
 	/* do a phy reset to test if there is an active phy */
-	if (b44_phy_reset(bp) < 0)
-		bp->phy_addr = B44_PHY_ADDR_NO_LOACL_PHY;
+	err = b44_phy_reset(bp);
+	if (err < 0) {
+		dev_err(sdev->dev, "phy reset failed\n");
+		goto err_out_unregister_netdev;
+	}
 
 	if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
 		err = b44_register_phy_one(bp);