diff mbox

[net,v2,1/1] drivers: net : cpsw: pass proper device name while requesting irq

Message ID 1386925527-6706-1-git-send-email-mugunthanvnm@ti.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Mugunthan V N Dec. 13, 2013, 9:05 a.m. UTC
From: George Cherian <george.cherian@ti.com>

During checking the interrupts with "cat /proc/interrupts", it is showing
device name as (null), this change was done with commit id aa1a15e2d where
request_irq is changed to devm_request_irq also changing the irq name from
platform device name to net device name, but the net device is not
registered at this point with the network frame work, so devm_request_irq
is called with device name as NULL, by which it is showed as "(null)" in
"cat /proc/interrupts". So this patch moved the devm_request_irq after
the net device register so that the device name shows as eth*.

Previous to this patch
root@am335x-evm:~# cat /proc/interrupts
           CPU0
 28:       2265      INTC  12  edma
 30:         80      INTC  14  edma_error
 44:        345      INTC  28  mmc1
 56:          0      INTC  40  (null)
 57:       1794      INTC  41  (null)
 58:          7      INTC  42  (null)
 59:          0      INTC  43  (null)

With this patch
root@am335x-evm:~# cat /proc/interrupts
           CPU0
 28:       2254      INTC  12  edma
 30:         69      INTC  14  edma_error
 44:        324      INTC  28  mmc1
 56:          0      INTC  40  eth0
 57:        271      INTC  41  eth0
 58:          7      INTC  42  eth0
 59:          0      INTC  43  eth0

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
Changes from Initial version
* Changed the commit message to hold more details of the commit changes
---
 drivers/net/ethernet/ti/cpsw.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

Comments

David Miller Dec. 17, 2013, 7:39 p.m. UTC | #1
From: Mugunthan V N <mugunthanvnm@ti.com>
Date: Fri, 13 Dec 2013 14:35:27 +0530

> During checking the interrupts with "cat /proc/interrupts", it is showing
> device name as (null), this change was done with commit id aa1a15e2d where
> request_irq is changed to devm_request_irq also changing the irq name from
> platform device name to net device name, but the net device is not
> registered at this point with the network frame work, so devm_request_irq
> is called with device name as NULL, by which it is showed as "(null)" in
> "cat /proc/interrupts". So this patch moved the devm_request_irq after
> the net device register so that the device name shows as eth*.

This change is buggy.

If the request irq fails, you have to unregister the network device,
branching to clean_ale_ret is insufficient.

And this shows the more fundamental problem with your change, you
cannot register the network device before you request the IRQs
if your ->open() method assumes that the IRQs are registered already.

Which this driver does.

The very moment you call request_irq(), the interface can be brought
up and then ->open() method invoked.

Therefore, register_netdevice() absolutely must be the very last
action during the probe function.

Why don't you just use the platform device name as the interrupt
name?  The other alternative is to only register the IRQs in the
->open() routine and free the IRQ in the ->close() method.

I can't apply this, sorry.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5120d9c..d80dfce 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2103,19 +2103,6 @@  static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 	}
 
-	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
-		for (i = res->start; i <= res->end; i++) {
-			if (devm_request_irq(&pdev->dev, i, cpsw_interrupt, 0,
-					     dev_name(priv->dev), priv)) {
-				dev_err(priv->dev, "error attaching irq\n");
-				goto clean_ale_ret;
-			}
-			priv->irqs_table[k] = i;
-			priv->num_irqs = k + 1;
-		}
-		k++;
-	}
-
 	ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	ndev->netdev_ops = &cpsw_netdev_ops;
@@ -2131,6 +2118,19 @@  static int cpsw_probe(struct platform_device *pdev)
 		goto clean_ale_ret;
 	}
 
+	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
+		for (i = res->start; i <= res->end; i++) {
+			if (devm_request_irq(&pdev->dev, i, cpsw_interrupt, 0,
+					     dev_name(priv->dev), priv)) {
+				dev_err(priv->dev, "error attaching irq\n");
+				goto clean_ale_ret;
+			}
+			priv->irqs_table[k] = i;
+			priv->num_irqs = k + 1;
+		}
+		k++;
+	}
+
 	if (cpts_register(&pdev->dev, priv->cpts,
 			  data->cpts_clock_mult, data->cpts_clock_shift))
 		dev_err(priv->dev, "error registering cpts device\n");