diff mbox

[3.8,125/152] hwmon: (lm90) Fix max6696 alarm handling

Message ID 1386371476-2477-126-git-send-email-kamal@canonical.com
State New
Headers show

Commit Message

Kamal Mostafa Dec. 6, 2013, 11:10 p.m. UTC 
3.8.13.14 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit e41fae2b1ed8c78283d73651cd65be0228c0dd1c upstream.

Bit 2 of status register 2 on MAX6696 (external diode 2 open)
sets ALERT; the bit thus has to be listed in alert_alarms.
Also display a message in the alert handler if the condition
is encountered.

Even though not all overtemperature conditions cause ALERT
to be set, we should not ignore them in the alert handler.
Display messages for all out-of-range conditions.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/hwmon/lm90.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 863412a..5181a76 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -278,7 +278,7 @@  static const struct lm90_params lm90_params[] = {
 	[max6696] = {
 		.flags = LM90_HAVE_EMERGENCY
 		  | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3,
-		.alert_alarms = 0x187c,
+		.alert_alarms = 0x1c7c,
 		.max_convrate = 6,
 		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
@@ -1500,19 +1500,22 @@  static void lm90_alert(struct i2c_client *client, unsigned int flag)
 	if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
 		dev_info(&client->dev, "Everything OK\n");
 	} else {
-		if (alarms & 0x61)
+		if ((alarms & 0x61) || (alarms2 & 0x80))
 			dev_warn(&client->dev,
 				 "temp%d out of range, please check!\n", 1);
-		if (alarms & 0x1a)
+		if ((alarms & 0x1a) || (alarms2 & 0x20))
 			dev_warn(&client->dev,
 				 "temp%d out of range, please check!\n", 2);
 		if (alarms & 0x04)
 			dev_warn(&client->dev,
 				 "temp%d diode open, please check!\n", 2);
 
-		if (alarms2 & 0x18)
+		if (alarms2 & 0x5a)
 			dev_warn(&client->dev,
 				 "temp%d out of range, please check!\n", 3);
+		if (alarms2 & 0x04)
+			dev_warn(&client->dev,
+				 "temp%d diode open, please check!\n", 3);
 
 		/*
 		 * Disable ALERT# output, because these chips don't implement