diff mbox

[V5,2/7] Add device-width property to pflash_cfi01

Message ID 1386279359-32286-3-git-send-email-roy.franz@linaro.org
State New
Headers show

Commit Message

Roy Franz Dec. 5, 2013, 9:35 p.m. UTC 
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes.  This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
---
 hw/block/pflash_cfi01.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Peter Maydell Dec. 12, 2013, 5:31 p.m. UTC | #1 
On 5 December 2013 21:35, Roy Franz <roy.franz@linaro.org> wrote:
> The width of the devices that make up the flash interface
> is required to mask certain commands, in particular the
> write length for buffered writes.  This length will be presented
> to each device on the interface by the program writing the flash,
> and the flash emulation code needs to be able to determine
> the length of the write as recieved by each flash device.
> The device-width defaults to the bank width which should
> maintain existing behavior for platforms that don't need
> this change.
> This change is required to support buffered writes on the
> vexpress platform that has a 32 bit flash interface with 2
> 16 bit devices on it.
>
> Signed-off-by: Roy Franz <roy.franz@linaro.org

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM
diff mbox

Patch

diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index a0d7a16..a458ad6 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -40,6 +40,7 @@ 
 #include "hw/block/flash.h"
 #include "block/block.h"
 #include "qemu/timer.h"
+#include "qemu/bitops.h"
 #include "exec/address-spaces.h"
 #include "qemu/host-utils.h"
 #include "hw/sysbus.h"
@@ -72,6 +73,7 @@  struct pflash_t {
     uint32_t nb_blocs;
     uint64_t sector_len;
     uint8_t bank_width;
+    uint8_t device_width; /* If 0, device width not specified. */
     uint8_t be;
     uint8_t wcycle; /* if 0, the flash is read normally */
     int ro;
@@ -379,6 +381,14 @@  static void pflash_write(pflash_t *pfl, hwaddr offset,
 
             break;
         case 0xe8:
+            /* Mask writeblock size based on device width, or bank width if
+             * device width not specified.
+             */
+            if (pfl->device_width) {
+                value = extract32(value, 0, pfl->device_width * 8);
+            } else {
+                value = extract32(value, 0, pfl->bank_width * 8);
+            }
             DPRINTF("%s: block write of %x bytes\n", __func__, value);
             pfl->counter = value;
             pfl->wcycle++;
@@ -708,6 +718,7 @@  static Property pflash_cfi01_properties[] = {
     DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0),
     DEFINE_PROP_UINT64("sector-length", struct pflash_t, sector_len, 0),
     DEFINE_PROP_UINT8("width", struct pflash_t, bank_width, 0),
+    DEFINE_PROP_UINT8("device-width", struct pflash_t, device_width, 0),
     DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0),
     DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0),
     DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0),