@@ -60,6 +60,7 @@
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/clk.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
@@ -563,6 +564,12 @@ struct mv_host_priv {
struct clk *clk;
struct clk **port_clks;
/*
+ * Some devices have a SATA PHY which can be enabled/disabled
+ * in order to save power. These are optional: if the platform
+ * devices does not have any phy, they won't be used.
+ */
+ struct phy **port_phys;
+ /*
* These consistent DMA memory pools give us guaranteed
* alignment for hardware-accessed data structures,
* and less memory waste in accomplishing the alignment.
@@ -4076,6 +4083,11 @@ static int mv_platform_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!hpriv->port_clks)
return -ENOMEM;
+ hpriv->port_phys = devm_kzalloc(&pdev->dev,
+ sizeof(struct phy *) * n_ports,
+ GFP_KERNEL);
+ if (!hpriv->port_phys)
+ return -ENOMEM;
host->private_data = hpriv;
hpriv->n_ports = n_ports;
hpriv->board_idx = chip_soc;
@@ -4097,6 +4109,9 @@ static int mv_platform_probe(struct platform_device *pdev)
hpriv->port_clks[port] = clk_get(&pdev->dev, port_number);
if (!IS_ERR(hpriv->port_clks[port]))
clk_prepare_enable(hpriv->port_clks[port]);
+ hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number);
+ if (!IS_ERR(hpriv->port_phys[port]))
+ phy_power_on(hpriv->port_phys[port]);
}
/*
@@ -4132,6 +4147,8 @@ err:
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
+ if (!IS_ERR(hpriv->port_phys[port]))
+ phy_power_off(hpriv->port_phys[port]);
}
return rc;
@@ -4161,6 +4178,8 @@ static int mv_platform_remove(struct platform_device *pdev)
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
+ if (!IS_ERR(hpriv->port_phys[port]))
+ phy_power_off(hpriv->port_phys[port]);
}
return 0;
}
Some Marvell SoCs have a SATA PHY which can be powered off, in order to save power. Make use of the generic phy framework to control these phys. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/ata/sata_mv.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)