Message ID | 1386262263-18956-2-git-send-email-andrew@lunn.ch |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
On Thu, Dec 05, 2013 at 05:51:00PM +0100, Andrew Lunn wrote: > Describe the binding for the Marvell MVEBU SATA phy. This driver > can be used at least with Kirkwood, Dove and maybe others. > Additionally, update the SATA binding with the properties to link > to the phy nodes. > > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > --- > v1->v2: > Correct #phy-cells > Correct number after @ to match first reg address. > Rename to mvebu-phy.txt Ok, this follows samsung-phy.txt. > --- > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ > .../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++++++++++++++++++++ but this does not... ? thx, Jason. > 2 files changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt > > diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt > index b5cdd20cde9c..e072fa105b49 100644 > --- a/Documentation/devicetree/bindings/ata/marvell.txt > +++ b/Documentation/devicetree/bindings/ata/marvell.txt > @@ -6,11 +6,17 @@ Required Properties: > - interrupts : Interrupt controller is using > - nr-ports : Number of SATA ports in use. > > +Optional Properties: > +- phys : List of phandles to sata phys > +- phy-names : Should be "0", "1", etc, one number per phandle > + > Example: > > sata@80000 { > compatible = "marvell,orion-sata"; > reg = <0x80000 0x5000>; > interrupts = <21>; > + phys = <&sata_phy0>, <&sata_phy1>; > + phy-names = "0", "1"; > nr-ports = <2>; > } > diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt > new file mode 100644 > index 000000000000..6cb3364aeafb > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt > @@ -0,0 +1,22 @@ > +* Marvell MVEBU SATA PHY > + > +Power control for the SATA phy found on Marvell MVEBU SoCs. > + > +This document extends the binding described in phy-bindings.txt > + > +Required properties : > + > + - reg : Offset and length of the register set for the SATA device > + - compatible : Should be "marvell,mvebu-sata-phy" > + - clocks : phandle of clock and specifier that supplies the device > + - clock-names : Should be "sata" > + > +Example: > + sata-phy@84000 { > + compatible = "marvell,mvebu-sata-phy"; > + reg = <0x84000 0x0334>; > + clocks = <&gate_clk 15>; > + clock-names = "sata"; > + #phy-cells = <0>; > + status = "ok"; > + }; > -- > 1.8.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt index b5cdd20cde9c..e072fa105b49 100644 --- a/Documentation/devicetree/bindings/ata/marvell.txt +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -6,11 +6,17 @@ Required Properties: - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use. +Optional Properties: +- phys : List of phandles to sata phys +- phy-names : Should be "0", "1", etc, one number per phandle + Example: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "0", "1"; nr-ports = <2>; } diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt new file mode 100644 index 000000000000..6cb3364aeafb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt @@ -0,0 +1,22 @@ +* Marvell MVEBU SATA PHY + +Power control for the SATA phy found on Marvell MVEBU SoCs. + +This document extends the binding described in phy-bindings.txt + +Required properties : + + - reg : Offset and length of the register set for the SATA device + - compatible : Should be "marvell,mvebu-sata-phy" + - clocks : phandle of clock and specifier that supplies the device + - clock-names : Should be "sata" + +Example: + sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + };
Describe the binding for the Marvell MVEBU SATA phy. This driver can be used at least with Kirkwood, Dove and maybe others. Additionally, update the SATA binding with the properties to link to the phy nodes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v1->v2: Correct #phy-cells Correct number after @ to match first reg address. Rename to mvebu-phy.txt --- Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ .../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt