Patchwork [3/3] Add support for the eukrea-cpuimx28.

login
register
mail settings
Submitter Denis Carikli
Date Dec. 5, 2013, 1:28 p.m.
Message ID <1386250086-4666-3-git-send-email-denis@eukrea.com>
Download mbox | patch
Permalink /patch/297144/
State New
Headers show

Comments

Denis Carikli - Dec. 5, 2013, 1:28 p.m.
From: Eric Bénard <eric@eukrea.com>

The following devices/functionalities were tested:
 * Main UART.
 * Ethernet0.
 * Ethernet1.
 * SD.
 * USB host.
 * USB otg.
 * Display(and its backlight).
 * Touchscreen.
 * Audio.
 * nand.
 * i2c and the pcf8563 device.
 * The gpio buttons.
 * The gpio leds.
 * Watchdog

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
 arch/arm/boot/dts/Makefile                   |    2 +
 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts |   71 ++++++
 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts |   50 ++++
 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi |  326 ++++++++++++++++++++++++++
 arch/arm/mach-mxs/mach-mxs.c                 |    8 +
 5 files changed, 457 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
Shawn Guo - Dec. 9, 2013, 3:25 a.m.
On Thu, Dec 05, 2013 at 02:28:06PM +0100, Denis Carikli wrote:
> From: Eric Bénard <eric@eukrea.com>

Please have a proper prefix for patch subject.

> 
> The following devices/functionalities were tested:
>  * Main UART.
>  * Ethernet0.
>  * Ethernet1.
>  * SD.
>  * USB host.
>  * USB otg.
>  * Display(and its backlight).
>  * Touchscreen.
>  * Audio.
>  * nand.
>  * i2c and the pcf8563 device.
>  * The gpio buttons.
>  * The gpio leds.
>  * Watchdog
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
>  arch/arm/boot/dts/Makefile                   |    2 +
>  arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts |   71 ++++++
>  arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts |   50 ++++
>  arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi |  326 ++++++++++++++++++++++++++
>  arch/arm/mach-mxs/mach-mxs.c                 |    8 +
>  5 files changed, 457 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
>  create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
>  create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi

<snip>

> diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
> index 02b17f7..3b5f57e 100644
> --- a/arch/arm/mach-mxs/mach-mxs.c
> +++ b/arch/arm/mach-mxs/mach-mxs.c
> @@ -448,6 +448,12 @@ static int __init mxs_restart_init(void)
>  	return 0;
>  }
>  
> +static void __init eukrea_mbmx283lc_init(void)
> +{
> +	enable_clk_enet_out();

This shouldn't be needed since commit daa7d39 (net: freescale: fec: add
support for optional enet_out clk) and commit (f231a9f ARM: dts: mxs:
add enet_out clock to devicetree)

Shawn

> +	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
> +}
> +
>  static void __init mxs_machine_init(void)
>  {
>  	struct device_node *root;
> @@ -486,6 +492,8 @@ static void __init mxs_machine_init(void)
>  		apx4devkit_init();
>  	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
>  		crystalfontz_init();
> +	else if (of_machine_is_compatible("eukrea,mbmx283lc"))
> +		eukrea_mbmx283lc_init();
>  	else if (of_machine_is_compatible("i2se,duckbill"))
>  		duckbill_init();
>  	else if (of_machine_is_compatible("msr,m28cu3"))
> -- 
> 1.7.9.5
>
Shawn Guo - Dec. 9, 2013, 3:31 a.m.
On Mon, Dec 09, 2013 at 11:25:32AM +0800, Shawn Guo wrote:
> > diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
> > index 02b17f7..3b5f57e 100644
> > --- a/arch/arm/mach-mxs/mach-mxs.c
> > +++ b/arch/arm/mach-mxs/mach-mxs.c
> > @@ -448,6 +448,12 @@ static int __init mxs_restart_init(void)
> >  	return 0;
> >  }
> >  
> > +static void __init eukrea_mbmx283lc_init(void)
> > +{
> > +	enable_clk_enet_out();
> 
> This shouldn't be needed since commit daa7d39 (net: freescale: fec: add
> support for optional enet_out clk) and commit (f231a9f ARM: dts: mxs:
> add enet_out clock to devicetree)

I just fixed it up and apply the patch.  Please test it and report back
if it does not work for you.

Shawn

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b14bb11..dec6e93 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -178,6 +178,8 @@  dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
 	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
 	imx28-evk.dtb \
 	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 0000000..7c1572c
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 0000000..e773144
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 0000000..927b391
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	button-sw3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	button-sw4 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 02b17f7..3b5f57e 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -448,6 +448,12 @@  static int __init mxs_restart_init(void)
 	return 0;
 }
 
+static void __init eukrea_mbmx283lc_init(void)
+{
+	enable_clk_enet_out();
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
 static void __init mxs_machine_init(void)
 {
 	struct device_node *root;
@@ -486,6 +492,8 @@  static void __init mxs_machine_init(void)
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("eukrea,mbmx283lc"))
+		eukrea_mbmx283lc_init();
 	else if (of_machine_is_compatible("i2se,duckbill"))
 		duckbill_init();
 	else if (of_machine_is_compatible("msr,m28cu3"))