diff mbox

[U-Boot,v3,2/2] mx6sabresd: Fix LVDS width and color format

Message ID 1386126497-15963-2-git-send-email-festevam@gmail.com
State Accepted
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam Dec. 4, 2013, 3:08 a.m. UTC 
From: Fabio Estevam <fabio.estevam@freescale.com>

mx6sabresd boards have a 18-bit LVDS data width and the correct color format
is RGB666.

Suggested-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- None
Changes since v1:
- None

 board/freescale/mx6sabresd/mx6sabresd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Stefano Babic Dec. 17, 2013, 5:45 p.m. UTC | #1 
On 04/12/2013 04:08, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> mx6sabresd boards have a 18-bit LVDS data width and the correct color format
> is RGB666.
> 
> Suggested-by: Liu Ying <Ying.Liu@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 1d5bba6..55e7961 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -294,15 +294,15 @@  static void enable_lvds(struct display_info_t const *dev)
 	struct iomuxc *iomux = (struct iomuxc *)
 				IOMUXC_BASE_ADDR;
 	u32 reg = readl(&iomux->gpr[2]);
-	reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
-	       IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT;
+	reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
+	       IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT;
 	writel(reg, &iomux->gpr[2]);
 }
 
 static struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
-	.pixfmt	= IPU_PIX_FMT_LVDS666,
+	.pixfmt	= IPU_PIX_FMT_RGB666,
 	.detect	= NULL,
 	.enable	= enable_lvds,
 	.mode	= {