deleted file mode 100644
@@ -1,29 +0,0 @@
-twl4030 GPIO controller bindings
-
-Required properties:
-- compatible:
- - "ti,twl4030-gpio" for twl4030 GPIO controller
-- #gpio-cells : Should be two.
- - first cell is the pin number
- - second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
- The first cell is the GPIO number.
- The second cell is not used.
-- ti,use-leds : Enables LEDA and LEDB outputs if set
-- ti,debounce : if n-th bit is set, debounces GPIO-n
-- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
-- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
-- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
-
-Example:
-
-twl_gpio: gpio {
- compatible = "ti,twl4030-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- ti,use-leds;
-};
deleted file mode 100644
@@ -1,27 +0,0 @@
-* TWL4030's Keypad Controller device tree bindings
-
-TWL4030's Keypad controller is used to interface a SoC with a matrix-type
-keypad device. The keypad controller supports multiple row and column lines.
-A key can be placed at each intersection of a unique row and a unique column.
-The keypad controller can sense a key-press and key-release and report the
-event using a interrupt to the cpu.
-
-This binding is based on the matrix-keymap binding with the following
-changes:
-
- * keypad,num-rows and keypad,num-columns are required.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
- - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad
- controller.
-- interrupt: should be one of the following
- - <1>: For controllers compatible with twl4030 keypad controller.
-
-Example:
- twl_keypad: keypad {
- compatible = "ti,twl4030-keypad";
- interrupts = <1>;
- keypad,num-rows = <8>;
- keypad,num-columns = <8>;
- };
deleted file mode 100644
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
- - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
- - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
- twl_pwrbutton: pwrbutton {
- compatible = "ti,twl4030-pwrbutton";
- interrupts = <8>;
- };
-};
deleted file mode 100644
@@ -1,47 +0,0 @@
-Texas Instruments TWL family
-
-The TWLs are Integrated Power Management Chips.
-Some version might contain much more analog function like
-USB transceiver or Audio amplifier.
-These chips are connected to an i2c bus.
-
-
-Required properties:
-- compatible : Must be "ti,twl4030";
- For Integrated power-management/audio CODEC device used in OMAP3
- based boards
-- compatible : Must be "ti,twl6030";
- For Integrated power-management used in OMAP4 based boards
-- interrupts : This i2c device has an IRQ line connected to the main SoC
-- interrupt-controller : Since the twl support several interrupts internally,
- it is considered as an interrupt controller cascaded to the SoC one.
-- #interrupt-cells = <1>;
-- interrupt-parent : The parent interrupt controller.
-
-Optional node:
-- Child nodes contain in the twl. The twl family is made of several variants
- that support a different number of features.
- The children nodes will thus depend of the capability of the variant.
-
-
-Example:
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
- */
-twl@48 {
- compatible = "ti,twl6030";
- reg = <0x48>;
- interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- twl_rtc {
- compatible = "ti,twl_rtc";
- interrupts = <11>;
- reg = <0>;
- };
-};
new file mode 100644
@@ -0,0 +1,457 @@
+Texas Instruments TWL family
+----------------------------
+
+The TWLs are i2c connected Integrated Power Management Chips.
+Some version contain much more analog function like
+USB transceiver or Audio amplifier.
+
+The TWL family provide have an integrated interrupt controller
+used by the internal subcomponents.
+
+Required properties:
+- compatible: Should contain:
+ * "ti,twl4030": For integrated power-management/audio CODEC device
+ used in OMAP3 boards.
+ * "ti,twl6030": For integrated power-management device used in OMAP4
+ based boards.
+- interrupts: interrupt-specifier for the sole interrupt generated by
+ the device.
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells: must be <1>
+
+Optional properties:
+- interrupt-parent : The parent interrupt controller. This property is
+ optional if the implicit interrupt controller is correct.
+
+Optional nodes:
+- Child nodes contained in the twl. The twl family is made of several
+ variants that support a different number of features. The children
+ nodes will thus depend of the capability of the variant.
+
+TWL Regulator
+-------------
+
+Required properties:
+For twl6030 regulators/LDOs
+- compatible:
+ - "ti,twl6030-vaux1" for VAUX1 LDO
+ - "ti,twl6030-vaux2" for VAUX2 LDO
+ - "ti,twl6030-vaux3" for VAUX3 LDO
+ - "ti,twl6030-vmmc" for VMMC LDO
+ - "ti,twl6030-vpp" for VPP LDO
+ - "ti,twl6030-vusim" for VUSIM LDO
+ - "ti,twl6030-vana" for VANA LDO
+ - "ti,twl6030-vcxio" for VCXIO LDO
+ - "ti,twl6030-vdac" for VDAC LDO
+ - "ti,twl6030-vusb" for VUSB LDO
+ - "ti,twl6030-v1v8" for V1V8 LDO
+ - "ti,twl6030-v2v1" for V2V1 LDO
+ - "ti,twl6030-vdd1" for VDD1 SMPS
+ - "ti,twl6030-vdd2" for VDD2 SMPS
+ - "ti,twl6030-vdd3" for VDD3 SMPS
+For twl6032 regulators/LDOs
+- compatible:
+ - "ti,twl6032-ldo1" for LDO1 LDO
+ - "ti,twl6032-ldo2" for LDO2 LDO
+ - "ti,twl6032-ldo3" for LDO3 LDO
+ - "ti,twl6032-ldo4" for LDO4 LDO
+ - "ti,twl6032-ldo5" for LDO5 LDO
+ - "ti,twl6032-ldo6" for LDO6 LDO
+ - "ti,twl6032-ldo7" for LDO7 LDO
+ - "ti,twl6032-ldoln" for LDOLN LDO
+ - "ti,twl6032-ldousb" for LDOUSB LDO
+ - "ti,twl6032-smps3" for SMPS3 SMPS
+ - "ti,twl6032-smps4" for SMPS4 SMPS
+ - "ti,twl6032-vio" for VIO SMPS
+For twl4030 regulators/LDOs
+- compatible:
+ - "ti,twl4030-vaux1" for VAUX1 LDO
+ - "ti,twl4030-vaux2" for VAUX2 LDO
+ - "ti,twl5030-vaux2" for VAUX2 LDO
+ - "ti,twl4030-vaux3" for VAUX3 LDO
+ - "ti,twl4030-vaux4" for VAUX4 LDO
+ - "ti,twl4030-vmmc1" for VMMC1 LDO
+ - "ti,twl4030-vmmc2" for VMMC2 LDO
+ - "ti,twl4030-vpll1" for VPLL1 LDO
+ - "ti,twl4030-vpll2" for VPLL2 LDO
+ - "ti,twl4030-vsim" for VSIM LDO
+ - "ti,twl4030-vdac" for VDAC LDO
+ - "ti,twl4030-vintana2" for VINTANA2 LDO
+ - "ti,twl4030-vio" for VIO LDO
+ - "ti,twl4030-vdd1" for VDD1 SMPS
+ - "ti,twl4030-vdd2" for VDD2 SMPS
+ - "ti,twl4030-vintana1" for VINTANA1 LDO
+ - "ti,twl4030-vintdig" for VINTDIG LDO
+ - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
+ - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
+ - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+TWL RTC
+-------
+
+Required properties:
+- compatible : Should be twl4030-rtc
+
+TWL PWM
+-------
+
+Supported PWMs:
+On TWL4030 series: PWM1 and PWM2
+On TWL6030 series: PWM0 and PWM1
+
+Required properties:
+- compatible: Should contain one of:
+ * "ti,twl4030-pwm"
+ * "ti,twl6030-pwm"
+- #pwm-cells: should be 2. See Documentation/devicetree/bindings/pwm/pwm.txt
+ for a description of the cells format. The binding follows the "typical"
+ encoding.
+
+TWL PWM LED
+-----------
+
+Supported PWMs:
+On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
+On TWL6030 series: LED PWM (mainly used as charging indicator LED)
+
+Required properties:
+- compatible: Should contain one of:
+ * "ti,twl4030-pwmled"
+ * "ti,twl6030-pwmled"
+- #pwm-cells: should be 2. See Documentation/devicetree/bindings/pwm/pwm.txt
+ for a description of the cells format. The binding follows the "typical"
+ encoding.
+
+TWL4030 USB PHY AND COMPARATOR
+------------------------------
+
+Required properties:
+ - compatible : Should contain "ti,twl4030-usb"
+ - interrupts: A list of interrupt-specifiers:
+ [1] The OTG interrupt
+ [2] The VBUS interrupt (optional)
+ - vusb1v5-supply: phandle to the TWL's usb 1.5V regulator device
+ - vusb1v8-supply: phandle to the TWL's usb 1.8V regulator device
+ - vusb3v1-supply: phandle to the TWL's usb 3.1V regulator device
+ - usb_mode : The mode used by the phy to connect to the controller. <1>
+ specifies "ULPI" mode and <2> specifies "CEA2011_3PIN" mode.
+
+TWL6030 USB COMPARATOR
+----------------------
+
+Required properties:
+ - compatible : Should contain "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the otg interrupt number that raises ID interrupts when
+ the controller has to act as host and the second interrupt number is the
+ usb interrupt number that raises VBUS interrupts when the controller has to
+ act as device
+ - usb-supply : phandle to the regulator device tree node. It should be vusb
+ if it is twl6030 or ldousb if it is twl6032 subclass.
+
+TWL4030 GPIO Controller
+-----------------------
+
+Required properties:
+- compatible: Should contain "ti,twl4030-gpio"
+- #gpio-cells : Should be two.
+ - first cell is the pin number
+ - second cell is a bit field of flags, as defined in <dt-bindings/gpio/gpio.h>
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+ The first cell is the GPIO number.
+ The second cell is not used.
+- interrupt-controller: Mark the device node as an interrupt controller
+- ti,use-leds : Boolean; enables LEDA and LEDB outputs if set
+- ti,debounce : 32 Bit Unsigned; if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : 32 Bit Unsigned; if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : 32 Bit Unsigned; if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : 32 Bit Unsigned; if n-th bit is set, set a pulldown on GPIO-n
+
+TWL4030 Audio
+-------------
+
+The audio module inside the TWL family consist of an audio codec and
+a vibrator driver.
+
+Required properties:
+- compatible : Should contain "ti,twl4030-audio"
+
+Optional properties:
+- ti,enable-vibra : Should be set to <1> if the vibra functionality is used.
+ if missing or it is 0, the vibra functionality is disabled.
+
+The node may contain a subnode named "codec", which may have the
+following properties:
+
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+ from the start of the recorded sample (in ms)
+- ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+- ti,hs_extmute: 32 Bit Unsigned; Use external mute for HS pop reduction
+- ti,hs_extmute_gpio: GPIO phandle; Use external GPIO to control the external mute
+- ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+ valid values.
+
+TWL4030 Power
+-------------
+
+The power management module inside the TWL family provides several facilities
+to control the power resources, including power scripts. For now, the binding
+only supports the complete shutdown of the system after poweroff.
+
+Required properties:
+- compatible : Should contain "ti,twl4030-power"
+
+Optional properties:
+- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
+ SLEEP-to-OFF transition when the system poweroffs.
+
+TWL4030 Watchdog
+----------------
+
+Required properties:
+- compatible: Should contain "ti,twl4030-wdt"
+
+TWL4030 Power Button
+--------------------
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: Should contain "ti,twl4030-pwrbutton"
+- interrupts: Should be one of the following
+ - <8>: For controllers compatible with twl4030
+
+TWL4030 Keypad
+--------------
+
+TWL4030's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+ * keypad,num-rows is required.
+ * keypad,num-columns is required.
+
+Required SoC Specific Properties:
+- compatible: Should contain "ti,twl4030-keypad"
+- interrupt: Should be one of the following
+ - <1>: For controllers compatible with twl4030 keypad controller.
+
+Example
+-------
+
+This is an example for TWL4030 binding (Nokia N900):
+
+&i2c {
+ twl@48 {
+ compatible = "ti,twl4030";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ reg = <0x48>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+
+ watchdog {
+ compatible = "ti,twl4030-wdt";
+ };
+
+ vaux1: regulator-vaux1 {
+ compatible = "ti,twl4030-vaux1";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on; /* due battery cover sensor */
+ };
+
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl4030-vaux2";
+
+ regulator-name = "VCSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vaux3: regulator-vaux3 {
+ compatible = "ti,twl4030-vaux3";
+
+ regulator-name = "VMMC2_30";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vaux4: regulator-vaux4 {
+ compatible = "ti,twl4030-vaux4";
+
+ regulator-name = "VCAM_ANA_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vcc: regulator-vdd1 {
+ compatible = "ti,twl4030-vdd1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1450000>;
+ };
+
+ vdac: regulator-vdac {
+ compatible = "ti,twl4030-vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vio: regulator-vio {
+ compatible = "ti,twl4030-vio";
+
+ regulator-name = "VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vintana1: regulator-vintana1 {
+ compatible = "ti,twl4030-vintana1";
+
+ regulator-name = "VINTANA1";
+ /* fixed to 1500000 */
+ regulator-always-on;
+ };
+
+ vintana2: regulator-vintana2 {
+ compatible = "ti,twl4030-vintana2";
+
+ regulator-name = "VINTANA2";
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+ };
+
+ vintdig: regulator-vintdig {
+ compatible = "ti,twl4030-vintdig";
+
+ regulator-name = "VINTDIG";
+ /* fixed to 1500000 */
+ regulator-always-on;
+ };
+
+ vmmc1: regulator-vmmc1 {
+ compatible = "ti,twl4030-vmmc1";
+
+ regulator-name = "VMMC1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vmmc2: regulator-vmmc2 {
+ compatible = "ti,twl4030-vmmc2";
+
+ regulator-name = "V28_A";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on; /* due VIO leak to AIC34 VDDs */
+ };
+
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
+ vpll1: regulator-vpll1 {
+ compatible = "ti,twl4030-vpll1";
+
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vpll2: regulator-vpll2 {
+ compatible = "ti,twl4030-vpll2";
+
+ regulator-name = "VSDI_CSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+
+ regulator-name = "VMMC2_IO_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ twl_gpio: gpio {
+ compatible = "ti,twl4030-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ usb2_phy: twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ };
+
+ twl_pwm: pwm {
+ compatible = "ti,twl4030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ compatible = "ti,twl4030-pwmled";
+ #pwm-cells = <2>;
+ };
+
+ twl_keypad: keypad {
+ compatible = "ti,twl4030-keypad";
+ interrupts = <1>;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+
+ linux,keymap = < 0x00000010 /* KEY_Q */
+ 0x00010018 /* KEY_O */
+ 0x00020019 /* KEY_P */
+ /* ... */
+ >;
+ };
+
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ ti,enable-vibra = <1>;
+ };
+ };
+};
deleted file mode 100644
@@ -1,46 +0,0 @@
-Texas Instruments TWL family (twl4030) audio module
-
-The audio module inside the TWL family consist of an audio codec and a vibra
-driver.
-
-Required properties:
-- compatible : must be "ti,twl4030-audio"
-
-Optional properties, nodes:
-
-Audio functionality:
-- codec { }: Need to be present if the audio functionality is used. Within this
- section the following options can be used:
-- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
- from the start of the recorded sample (in ms)
--ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
--ti,hs_extmute: Use external mute for HS pop reduction
--ti,hs_extmute_gpio: Use external GPIO to control the external mute
--ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
- valid values.
-
-Vibra functionality
-- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
- missing or it is 0, the vibra functionality is disabled.
-
-Example:
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
-
- ti,enable-vibra = <1>;
-
- codec {
- ti,ramp_delay_value = <3>;
- };
-
- };
- };
-};
deleted file mode 100644
@@ -1,28 +0,0 @@
-Texas Instruments TWL family (twl4030) reset and power management module
-
-The power management module inside the TWL family provides several facilities
-to control the power resources, including power scripts. For now, the
-binding only supports the complete shutdown of the system after poweroff.
-
-Required properties:
-- compatible : must be "ti,twl4030-power"
-
-Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
- SLEEP-to-OFF transition when the system poweroffs.
-
-Example:
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_power: power {
- compatible = "ti,twl4030-power";
- ti,use_poweroff;
- };
- };
-};
deleted file mode 100644
@@ -1,17 +0,0 @@
-Texas Instruments TWL series PWM drivers
-
-Supported PWMs:
-On TWL4030 series: PWM1 and PWM2
-On TWL6030 series: PWM0 and PWM1
-
-Required properties:
-- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm"
-- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
- the cells format.
-
-Example:
-
-twl_pwm: pwm {
- compatible = "ti,twl6030-pwm";
- #pwm-cells = <2>;
-};
deleted file mode 100644
@@ -1,17 +0,0 @@
-Texas Instruments TWL series PWM drivers connected to LED terminals
-
-Supported PWMs:
-On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
-On TWL6030 series: LED PWM (mainly used as charging indicator LED)
-
-Required properties:
-- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled"
-- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
- the cells format.
-
-Example:
-
-twl_pwmled: pwmled {
- compatible = "ti,twl6030-pwmled";
- #pwm-cells = <2>;
-};
deleted file mode 100644
@@ -1,67 +0,0 @@
-TWL family of regulators
-
-Required properties:
-For twl6030 regulators/LDOs
-- compatible:
- - "ti,twl6030-vaux1" for VAUX1 LDO
- - "ti,twl6030-vaux2" for VAUX2 LDO
- - "ti,twl6030-vaux3" for VAUX3 LDO
- - "ti,twl6030-vmmc" for VMMC LDO
- - "ti,twl6030-vpp" for VPP LDO
- - "ti,twl6030-vusim" for VUSIM LDO
- - "ti,twl6030-vana" for VANA LDO
- - "ti,twl6030-vcxio" for VCXIO LDO
- - "ti,twl6030-vdac" for VDAC LDO
- - "ti,twl6030-vusb" for VUSB LDO
- - "ti,twl6030-v1v8" for V1V8 LDO
- - "ti,twl6030-v2v1" for V2V1 LDO
- - "ti,twl6030-vdd1" for VDD1 SMPS
- - "ti,twl6030-vdd2" for VDD2 SMPS
- - "ti,twl6030-vdd3" for VDD3 SMPS
-For twl6032 regulators/LDOs
-- compatible:
- - "ti,twl6032-ldo1" for LDO1 LDO
- - "ti,twl6032-ldo2" for LDO2 LDO
- - "ti,twl6032-ldo3" for LDO3 LDO
- - "ti,twl6032-ldo4" for LDO4 LDO
- - "ti,twl6032-ldo5" for LDO5 LDO
- - "ti,twl6032-ldo6" for LDO6 LDO
- - "ti,twl6032-ldo7" for LDO7 LDO
- - "ti,twl6032-ldoln" for LDOLN LDO
- - "ti,twl6032-ldousb" for LDOUSB LDO
- - "ti,twl6032-smps3" for SMPS3 SMPS
- - "ti,twl6032-smps4" for SMPS4 SMPS
- - "ti,twl6032-vio" for VIO SMPS
-For twl4030 regulators/LDOs
-- compatible:
- - "ti,twl4030-vaux1" for VAUX1 LDO
- - "ti,twl4030-vaux2" for VAUX2 LDO
- - "ti,twl5030-vaux2" for VAUX2 LDO
- - "ti,twl4030-vaux3" for VAUX3 LDO
- - "ti,twl4030-vaux4" for VAUX4 LDO
- - "ti,twl4030-vmmc1" for VMMC1 LDO
- - "ti,twl4030-vmmc2" for VMMC2 LDO
- - "ti,twl4030-vpll1" for VPLL1 LDO
- - "ti,twl4030-vpll2" for VPLL2 LDO
- - "ti,twl4030-vsim" for VSIM LDO
- - "ti,twl4030-vdac" for VDAC LDO
- - "ti,twl4030-vintana2" for VINTANA2 LDO
- - "ti,twl4030-vio" for VIO LDO
- - "ti,twl4030-vdd1" for VDD1 SMPS
- - "ti,twl4030-vdd2" for VDD2 SMPS
- - "ti,twl4030-vintana1" for VINTANA1 LDO
- - "ti,twl4030-vintdig" for VINTDIG LDO
- - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
- - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
- - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Example:
-
- xyz: regulator@0 {
- compatible = "ti,twl6030-vaux1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- };
deleted file mode 100644
@@ -1,12 +0,0 @@
-* TI twl RTC
-
-The TWL family (twl4030/6030) contains a RTC.
-
-Required properties:
-- compatible : Should be twl4030-rtc
-
-Examples:
-
-rtc@0 {
- compatible = "ti,twl4030-rtc";
-};
deleted file mode 100644
@@ -1,40 +0,0 @@
-USB COMPARATOR OF TWL CHIPS
-
-TWL6030 USB COMPARATOR
- - compatible : Should be "ti,twl6030-usb"
- - interrupts : Two interrupt numbers to the cpu should be specified. First
- interrupt number is the otg interrupt number that raises ID interrupts when
- the controller has to act as host and the second interrupt number is the
- usb interrupt number that raises VBUS interrupts when the controller has to
- act as device
- - usb-supply : phandle to the regulator device tree node. It should be vusb
- if it is twl6030 or ldousb if it is twl6032 subclass.
-
-twl6030-usb {
- compatible = "ti,twl6030-usb";
- interrupts = < 4 10 >;
-};
-
-Board specific device node entry
-&twl6030-usb {
- usb-supply = <&vusb>;
-};
-
-TWL4030 USB PHY AND COMPARATOR
- - compatible : Should be "ti,twl4030-usb"
- - interrupts : The interrupt numbers to the cpu should be specified. First
- interrupt number is the otg interrupt number that raises ID interrupts
- and VBUS interrupts. The second interrupt number is optional.
- - <supply-name>-supply : phandle to the regulator device tree node.
- <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
- - usb_mode : The mode used by the phy to connect to the controller. "1"
- specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
-
-twl4030-usb {
- compatible = "ti,twl4030-usb";
- interrupts = < 10 4 >;
- usb1v5-supply = <&vusb1v5>;
- usb1v8-supply = <&vusb1v8>;
- usb3v1-supply = <&vusb3v1>;
- usb_mode = <1>;
-};
deleted file mode 100644
@@ -1,10 +0,0 @@
-Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
-
-Required properties:
- compatible = "ti,twl4030-wdt";
-
-Example:
-
-watchdog {
- compatible = "ti,twl4030-wdt";
-};
Merge all TWL family subnode documentation into the TWL family documentation file and fix typo in its filename. Signed-off-by: Sebastian Reichel <sre@debian.org> --- Hi, This is v2 of the patch. Changes since v1 [0] are: * Update to latest twl4030-keypad DT patchset * Apply changes requested by Mark Rutland [1] [0] https://lkml.org/lkml/2013/11/8/475 [1] https://lkml.org/lkml/2013/11/11/258 -- Sebastian --- .../devicetree/bindings/gpio/gpio-twl4030.txt | 29 -- .../devicetree/bindings/input/twl4030-keypad.txt | 27 -- .../bindings/input/twl4030-pwrbutton.txt | 21 - .../devicetree/bindings/mfd/twl-familly.txt | 47 --- .../devicetree/bindings/mfd/twl-family.txt | 457 +++++++++++++++++++++ .../devicetree/bindings/mfd/twl4030-audio.txt | 46 --- .../devicetree/bindings/mfd/twl4030-power.txt | 28 -- .../devicetree/bindings/pwm/ti,twl-pwm.txt | 17 - .../devicetree/bindings/pwm/ti,twl-pwmled.txt | 17 - .../bindings/regulator/twl-regulator.txt | 67 --- Documentation/devicetree/bindings/rtc/twl-rtc.txt | 12 - .../devicetree/bindings/usb/twlxxxx-usb.txt | 40 -- .../devicetree/bindings/watchdog/twl4030-wdt.txt | 10 - 13 files changed, 457 insertions(+), 361 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-twl4030.txt delete mode 100644 Documentation/devicetree/bindings/input/twl4030-keypad.txt delete mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt delete mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl-family.txt delete mode 100644 Documentation/devicetree/bindings/mfd/twl4030-audio.txt delete mode 100644 Documentation/devicetree/bindings/mfd/twl4030-power.txt delete mode 100644 Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt delete mode 100644 Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt delete mode 100644 Documentation/devicetree/bindings/regulator/twl-regulator.txt delete mode 100644 Documentation/devicetree/bindings/rtc/twl-rtc.txt delete mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt delete mode 100644 Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt