@@ -56,6 +56,12 @@ config BROADCOM_PHY
Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
and BCM5482 PHYs.
+config BCM63XX_PHY
+ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
@@ -11,6 +11,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
@@ -0,0 +1,132 @@
+/*
+ * Driver for Broadcom 63xx SOCs integrated PHYs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MII_BCM63XX_IR 0x1a /* interrupt register */
+#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */
+#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */
+#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */
+#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */
+#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */
+
+MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_LICENSE("GPL");
+
+static int bcm63xx_config_init(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ /* Mask interrupts globally. */
+ reg |= MII_BCM63XX_IR_GMASK;
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ if (err < 0)
+ return err;
+
+ /* Unmask events we are interested in */
+ reg = ~(MII_BCM63XX_IR_DUPLEX |
+ MII_BCM63XX_IR_SPEED |
+ MII_BCM63XX_IR_LINK) |
+ MII_BCM63XX_IR_EN;
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int bcm63xx_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int bcm63xx_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BCM63XX_IR_GMASK;
+ else
+ reg |= MII_BCM63XX_IR_GMASK;
+
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ return err;
+}
+
+static struct phy_driver bcm63xx_1_driver = {
+ .phy_id = 0x00406000,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (1)",
+ /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
+/* same phy as above, with just a different OUI */
+static struct phy_driver bcm63xx_2_driver = {
+ .phy_id = 0x002bdc00,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (2)",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
+static int __init bcm63xx_phy_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&bcm63xx_1_driver);
+ if (ret)
+ goto out_63xx_1;
+ ret = phy_driver_register(&bcm63xx_2_driver);
+ if (ret)
+ goto out_63xx_2;
+ return ret;
+
+out_63xx_2:
+ phy_driver_unregister(&bcm63xx_1_driver);
+out_63xx_1:
+ return ret;
+}
+
+static void __exit bcm63xx_phy_exit(void)
+{
+ phy_driver_unregister(&bcm63xx_1_driver);
+ phy_driver_unregister(&bcm63xx_2_driver);
+}
+
+module_init(bcm63xx_phy_init);
+module_exit(bcm63xx_phy_exit);