diff mbox

powerpc/86xx: Enable XMC site on GE Fanuc SBC310

Message ID 20090630143238.10798.9863.stgit@ES-J7S4D2J.amer.consind.ge.com (mailing list archive)
State Accepted, archived
Commit 8798b9df26bbc7f3cee686483a0bac68b666bf8f
Delegated to: Kumar Gala
Headers show

Commit Message

Martyn Welch June 30, 2009, 2:32 p.m. UTC 
This patch enables the XMC (PCIe daughter card) site on the SBC310.
STG enter the description for the patch above.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
---

 arch/powerpc/boot/dts/gef_sbc310.dts |   37 ++++++++++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

Comments

Kumar Gala Aug. 7, 2009, 2:44 a.m. UTC | #1 
On Jun 30, 2009, at 9:32 AM, Martyn Welch wrote:

> This patch enables the XMC (PCIe daughter card) site on the SBC310.
> STG enter the description for the patch above.
>
> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
> ---
>
> arch/powerpc/boot/dts/gef_sbc310.dts |   37 +++++++++++++++++++++++++ 
> +++++++++
> 1 files changed, 37 insertions(+), 0 deletions(-)


applied to next.

- k
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 0f4c9ec..7810ea9 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -376,4 +376,41 @@ 
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef09000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x19 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
 };